Title page for ETD etd-02112014-000228

Type of Document Master's Thesis
Author Liang, Yongxuan
Author's Email Address yongxuan@vt.edu
URN etd-02112014-000228
Title Fabrication and Characterization of Superconducting Core Fibers with Fused Silica Cladding
Degree Master of Science
Department Materials Science and Engineering
Advisory Committee
Advisor Name Title
Gary R. Pickrell Committee Chair
Daniel S. Homa Committee Member
David E. Clark Committee Member
  • Four-probe
  • Microstructure
  • Melt-draw
  • Superconducting core
  • Fiber
  • Efficient cooling
  • Heat transfer
Date of Defense 2014-01-29
Availability restricted
Since the discovery of superconductivity, its fantastic properties have fascinated the scientific community. The discovery of high critical temperature (Tc) superconducting compositions further inspires the wide applications of superconductors with relatively inexpensive liquid nitrogen cooling. Recently, the integration of superconductivity and optical waveguides has put forward the potential for ultrasensitive, ultra-fast and ultralow noise light detectors. However, simple and cost effective superconductor designs and fabrication processes are still required to enable wide implementation. The objective of this research was to study the fabrication of the superconductor core fibers with a fused silica cladding via the melt-draw approach, as well as develop appropriate characterization techniques to describe the fibers produced. In addition, a further objective was to determine the cooling efficiency of ordered holes around a superconductor core and construction of a one dimensional (1-D) single-phase steady state model to predict the heat transfer during cryogenic liquid transfer inside glass tube. In this thesis, both Pb and YBCO superconductor core fibers with fused silica cladding have been demonstrated. The fibers were fabricated via the melt-draw technique and maintained overall diameters ranging from 200-900 μm and core diameters of 100-800 μm. Surface morphology, chemical composition, interface effect, and superconductivity were further investigated. Surface morphology analysis confirmed that the Pb and YBCO core fibers possessed good circularity and clean interfaces between the core and cladding. Both the Pb and YBCO cores were relatively dense after the melt-draw process. The melt-draw process avoided contamination during fabrication as indicated by the composition analysis. Limited PbO was examined on the Pb core surface but further action will be required to detect the source of oxygen. The YBCO core maintained a stoichiometric ratio comparable to the superconducting phase even after the melt forming process. The elemental mapping showed that limited cross-diffusion occurred between the Pb core and fused silica cladding. Conversely significantly more elemental cross interaction between the core and cladding was noted for the YBCO core fiber. Superconductivity of the Pb core was verified by a custom designed four-probe technique in liquid helium. The YBCO core was also confirmed to be superconductive after heat treatment with O2 present. The feasibility of efficient cooling by the holey glass tubes was confirmed. A 1-D single-phase steady state model was constructed to evaluate the heat transfer mechanism. The experimental results are in reasonable agreement to the theoretical calculation.
  Filename       Size       Approximate Download Time (Hours:Minutes:Seconds) 
 28.8 Modem   56K Modem   ISDN (64 Kb)   ISDN (128 Kb)   Higher-speed Access 
[VT] Liang_YX_T_2014_2.pdf 23.88 Mb 01:50:33 00:56:51 00:49:45 00:24:52 00:02:07
[VT] Liang_YX_T_2014_permissions_2.pdf 1.43 Mb 00:06:35 00:03:23 00:02:58 00:01:29 00:00:07
[VT] indicates that a file or directory is accessible from the Virginia Tech campus network only.

Browse All Available ETDs by ( Author | Department )

dla home
etds imagebase journals news ereserve special collections
virgnia tech home contact dla university libraries

If you have questions or technical problems, please Contact DLA.