Title page for ETD etd-05062002-004428

Type of Document Master's Thesis
Author Forrester, Merville Kenneth
Author's Email Address mervillef@hotmail.com
URN etd-05062002-004428
Title Stiffness Model of a Die Spring
Degree Master of Science
Department Mechanical Engineering
Advisory Committee
Advisor Name Title
Mitchiner, Reginald G. Committee Chair
Knight, Charles Eugene Committee Member
Wicks, Alfred L. Committee Member
  • rectangular cross-section
  • lateral stiffness
  • axial stiffness
  • moment stiffness
  • Helical Spring
  • finite element analysis
Date of Defense 1998-04-30
Availability unrestricted
The objective of this research is to determine the three-dimensional stiffness matrix of a rectangular cross-section helical coil compression spring. The stiffnesses of the spring are derived using strain energy methods and Castigliano’s second theorem.

A theoretical model is developed and presented in order to describe the various steps undertaken to calculate the spring’s stiffnesses. The resulting stiffnesses take into account the bending moments, the twisting moments, and the transverse shear forces. In addition, the spring’s geometric form which includes the effects of pitch, curvature of wire and distortion due to normal and transverse forces are taken into consideration.

Similar methods utilizing Castigliano’s second theorem and strain energy expressions were also used to derive equations for a circular cross-section spring. Their results are compared to the existing solutions and used to validate the equations derived for the rectangular cross-section helical coil compression spring.

A finite element model was generated using IDEAS (Integrated Design Engineering Analysis Software) and the stiffness matrix evaluated by applying a unit load along the spring’s axis, then calculating the corresponding changes in deformation. The linear stiffness matrix is then obtained by solving the linear system of equations in changes of load and deformation. This stiffness matrix is a six by six matrix relating the load (three forces and three moments) to the deformations (three translations and three rotations). The natural frequencies and mode shapes of a mechanical system consisting of an Additional mass and the spring are also determined.

Finally, a comparison of the stiffnesses derived using the analytical methods and those obtained from the finite element analysis was made and the results presented.

  Filename       Size       Approximate Download Time (Hours:Minutes:Seconds) 
 28.8 Modem   56K Modem   ISDN (64 Kb)   ISDN (128 Kb)   Higher-speed Access 
  Etd.pdf 4.02 Mb 00:18:36 00:09:34 00:08:22 00:04:11 00:00:21

Browse All Available ETDs by ( Author | Department )

dla home
etds imagebase journals news ereserve special collections
virgnia tech home contact dla university libraries

If you have questions or technical problems, please Contact DLA.