Title page for ETD etd-05222008-192805

Type of Document Dissertation
Author Mejia-Ariza, Juan Manuel
Author's Email Address juan.mejiaariza@gmail.com
URN etd-05222008-192805
Title Framework for Concentrated Strain Deployable Trusses
Degree PhD
Department Macromolecular Science and Engineering
Advisory Committee
Advisor Name Title
Lesko, John J. Committee Chair
Burns, John A. Committee Member
Case, Scott W. Committee Member
Dillard, David A. Committee Member
Murphey, Thomas W. Committee Member
Riffle, Judy S. Committee Member
  • concentrated strain approach
  • strain requirement
  • deployable trusses
  • hierarchical geometry
  • hinge material metric
Date of Defense 2008-01-30
Availability unrestricted
This research presents a simplified framework for the analysis of deployable trusses using the concentrated strain approach and uses it to provide key insights into the many design decisions to be made in the development of concentrated strain architectures. The framework uses Euler Column Theory to derive closed form solutions to estimate truss performance. The results are compared to a classical solution and shown to give similar results. A range of strut and hinge hierarchy choices are considered. Trusses composed of solid rods with rectangular flexures are shown to have significant axial and bending stiffness reductions due to the smaller cross-sectional areas and lower modulus of the flexures. Trusses composed of tubes are less sensitive to this because the flexure cross-sectional area does not dramatically change from that of the tube. A hinge material metric that properly weights flexure strain and modulus is presented to provide a basis for the comparison and selection of proper hinge materials. However, based on this metric, new materials with higher folding failure strain and higher modulus are needed. Finally, a concentrated strain deployable truss of solid rods was designed, manufactured, and tested. A truss performance index for column loading was used to compare this system with a distributed strain ATK-ABLE GR1 coilable boom system and an articulated ATK-ABLE SRTM boom system. It was demonstrated that the concentrated strain approach has the potential to achieve a higher linear compaction ratio and truss performance index for mass efficient deployable trusses than the distributed strain approach and the articulated approach.
  Filename       Size       Approximate Download Time (Hours:Minutes:Seconds) 
 28.8 Modem   56K Modem   ISDN (64 Kb)   ISDN (128 Kb)   Higher-speed Access 
  DisertationJuanMejiaAriza.pdf 5.80 Mb 00:26:51 00:13:48 00:12:05 00:06:02 00:00:30
  TitleJuanMejiaAriza.pdf 8.70 Kb 00:00:02 00:00:01 00:00:01 < 00:00:01 < 00:00:01

Browse All Available ETDs by ( Author | Department )

dla home
etds imagebase journals news ereserve special collections
virgnia tech home contact dla university libraries

If you have questions or technical problems, please Contact DLA.