Title page for ETD etd-05242004-162854

Type of Document Master's Thesis
Author Minter, Dion Len
Author's Email Address dminter@vt.edu
URN etd-05242004-162854
Title Development of Strategies in Finding the Optimal Cooling of Systems of Integrated Circuits
Degree Master of Science
Department Mechanical Engineering
Advisory Committee
Advisor Name Title
Scott, Elaine P. Committee Chair
Bohn, Jan Helge Committee Member
West, Robert L. Jr. Committee Member
  • Zoom-in
  • Multi-Scale Modeling
  • Component Rearrangement
  • Data Centers
  • Electronics Cooling
  • Thermal Management
  • Power Electronics
Date of Defense 2004-05-10
Availability unrestricted
The task of thermal management in electrical systems has never been simple and has only become more difficult in recent years as the power electronics industry pushes towards devices with higher power densities. At the Center for Power Electronic Systems (CPES), a new approach to power electronic design is being implemented with the Integrated Power Electronic Module (IPEM). It is believed that an IPEM-based design approach will significantly enhance the competitiveness of the U.S. electronics industry, revolutionize the power electronics industry, and overcome many of the technology limits in today’s industry by driving down the cost of manufacturing and design turnaround time. But with increased component integration comes the increased risk of component failure due to overheating. This thesis addresses the issues associated with the thermal management of integrated power electronic devices.

Two studies are presented in this thesis. The focus of these studies is on the thermal design of a DC-DC front-end power converter developed at CPES with an IPEM-based approach. The first study investigates how the system would respond when the fan location and heat sink fin arrangement are varied in order to optimize the effects of conduction and forced-convection heat transfer to cool the system. The set-up of an experimental test is presented, and the results are compared to the thermal model. The second study presents an improved methodology for the thermal modeling of large-scale electrical systems and their many subsystems. A zoom-in/zoom-out approach is used to overcome the computational limitations associated with modeling large systems. The analysis performed in this paper was completed using I-DEAS©, a three-dimensional finite element analysis (FEA) program which allows the thermal designer to simulate the affects of conduction and convection heat transfer in a forced-air cooling environment.

  Filename       Size       Approximate Download Time (Hours:Minutes:Seconds) 
 28.8 Modem   56K Modem   ISDN (64 Kb)   ISDN (128 Kb)   Higher-speed Access 
  thesis_Dion_L_Minter.pdf 3.05 Mb 00:14:06 00:07:15 00:06:21 00:03:10 00:00:16

Browse All Available ETDs by ( Author | Department )

dla home
etds imagebase journals news ereserve special collections
virgnia tech home contact dla university libraries

If you have questions or technical problems, please Contact DLA.