Title page for ETD etd-08072007-004210

Type of Document Master's Thesis
Author Grohs, Joshua Walter
Author's Email Address josh@grohs.us
URN etd-08072007-004210
Title Comparing In Situ and Bulk Constitutive Properties of a Structural Adhesive
Degree Master of Science
Department Mechanical Engineering
Advisory Committee
Advisor Name Title
West, Robert L. Jr. Committee Chair
Dillard, David A. Committee Co-Chair
Mitchell, Larry D. Committee Member
  • napkin ring
  • bulk adhesive
  • mechanical properties
  • in situ adhesive
  • constitutive properties
  • iosipescu shear
Date of Defense 2007-07-20
Availability unrestricted
In the continuing quest for more efficient designs, structural adhesives are being used in place of, or with, traditional fastening methods; however designing with adhesives is refined as traditional methods. To obtain the adhesive design properties, tests are often performed on bulk tensile and bonded shear specimens. Questions remain about the relationship between properties obtained from in situ adhesive joints and bulk adhesive specimens. As a result, an experimental plan was developed which characterized both the linear and nonlinear region of bulk and in situ adhesive performance of a two-part acrylic adhesive from Dow Chemical Company. A standard uniaxial tensile test was used for the bulk normal, while an Iosipescu shear test was used to characterize the bulk shear performance. In situ testing was performed on a napkin-ring specimen loaded in both tension and torsion. Stress-strain relationships in both shear and normal were developed and bulk and in situ adhesive performance was compared. Observations from testing were:

  1. Bulk shear and in situ shear tests showed similar performance in both the linear and nonlinear regions.

  2. Modulus of elasticity in bulk adhesive tests was similar to the effective modulus of elasticity in in situ tests.

  3. Prediction of normal yield strengths of the in situ adhesive through simple failure theory models proved to be inaccurate. Stress singularities, loading imperfections, and potentially a hydrostatic sensitivity were considered possible explanations.

  4. Adhesive showed sensitivity to voiding and surface flaws when loaded in a tensile configuration, refinement of specimen fabrication minimized these effects.

  Filename       Size       Approximate Download Time (Hours:Minutes:Seconds) 
 28.8 Modem   56K Modem   ISDN (64 Kb)   ISDN (128 Kb)   Higher-speed Access 
  Grohs_Thesis_ETD_Rev2.pdf 4.67 Mb 00:21:37 00:11:07 00:09:43 00:04:51 00:00:24

Browse All Available ETDs by ( Author | Department )

dla home
etds imagebase journals news ereserve special collections
virgnia tech home contact dla university libraries

If you have questions or technical problems, please Contact DLA.