Title page for ETD etd-08092011-133217

Type of Document Dissertation
Author Son, Seyul
Author's Email Address sson@vt.edu
URN etd-08092011-133217
Title Nonlinear Electromechanical Deformation of Isotropic and Anisotropic Electro-Elastic Materials
Degree PhD
Department Mechanical Engineering
Advisory Committee
Advisor Name Title
Goulbourne, Nakhiah C. Committee Chair
Hong, Dennis W. Committee Member
Inman, Daniel J. Committee Member
Leo, Donald J. Committee Member
Philen, Michael K. Committee Member
  • finite element model and transducers
  • electro-elastic material
  • dielectric elastomer
  • polyconvexity
Date of Defense 2011-07-25
Availability unrestricted
Electro-active polymers (EAPs) have emerged as a new class of active materials, which produce large deformations in response to an electric stimulus. EAPs have attractive characteristics of being lightweight, inexpensive, stretchable, and flexible. Additionally, EAPs are conformable, and their properties can be tailored to satisfy a broad range of requirements. These advantages have enabled many target applications in actuation and sensing. A general constitutive formulation for isotropic and anisotropic electro-active materials is developed using continuum mechanics framework and invariant theory. Based on the constitutive law, electromechanical stability of the electro-elastic materials is investigated using convexity and polyconvexity conditions. Implementation of the electro-active material model into a commercial finite element software (ABAQUS 6.9.1, PAWTUCKET, RI, USA) is presented. Several boundary and initial value problems are solved to investigate the actuation and sensing response of isotropic and anisotropic dielectric elastomers (DEs) subject to combined mechanical and electrical loads. The numerical response is compared with experimental results to validate the theoretical model.

For the constitutive formulation of the electro-elastic materials, invariants for the coupling between two families of electro-active fibers (or particles) and the applied electric field are introduced. The effect of the orientation of the electro-active fibers and the electric field on the

electromechanical coupling is investigated under equibiaxial extension. Advantage of the constitutive formulation derived in this research is that the electromechanical coupling can be illustrated easily by choosing invariants for the deformation gradient tensor, the electro-active fibers, and the electric field. For the electromechanical stability, it is shown that the stability can be controlled by tuning the material properties and the orientation of the electro-active fibers. The electromechanical stability condition is useful to build a stable free energy function and prevent the instabilities (wrinkling and electric breakdown) for the electro-elastic materials. The invariant-based constitutive formulation for the electro-elastic materials including the isotropic and anisotropic DEs is implemented into a user subroutine (UMAT in ABAQUS: user defined material) by using multiplicative decomposition of the deformation gradient and the applicability of the UMAT is shown by simulating a complicated electromechanical coupling problem in ABAQUS/CAE. Additionally, the static and dynamic sensing and actuation response of tubular DE transducers (silicone and polyacrylate materials) with respect to combined electrical and mechanical stimuli is obtained experimentally. It is shown that the silicone samples have better dynamic and static sensing characteristics than the polyacrylate. The theoretical modeling accords well with the experimental results.

  Filename       Size       Approximate Download Time (Hours:Minutes:Seconds) 
 28.8 Modem   56K Modem   ISDN (64 Kb)   ISDN (128 Kb)   Higher-speed Access 
  Son_Seyul_D_2011.pdf 5.91 Mb 00:27:20 00:14:03 00:12:18 00:06:09 00:00:31

Browse All Available ETDs by ( Author | Department )

dla home
etds imagebase journals news ereserve special collections
virgnia tech home contact dla university libraries

If you have questions or technical problems, please Contact DLA.