Title page for ETD etd-11132009-031617

Type of Document Dissertation
Author Duncan, Andrew Jay
Author's Email Address ajduncan@vt.edu
URN etd-11132009-031617
Title Synthesis and Characterization of Branched Ionomers for Performance in Ionic Liquid – Swollen Ionic Polymer Transducers
Degree PhD
Department Macromolecular Science and Engineering
Advisory Committee
Advisor Name Title
Leo, Donald J. Committee Chair
Long, Timothy E. Committee Co-Chair
Akle, Barbara J. Committee Member
Goulbourne, Nakhiah C. Committee Member
Turner, S. Richard Committee Member
Wilkes, Garth L. Committee Member
  • ionic liquid
  • actuator
  • ionic polymer transducer
  • ionomer
  • branching
  • polysulfone
Date of Defense 2009-10-29
Availability unrestricted
Ionic polymer transducers (IPT) are a class of electroactive polymer devices that exhibit electromechanical coupling through charge transport in ionomeric membranes that contain a charge mobilizing diluent and are interfaced with conducting electrodes. Applications of these active materials have been broadly developed in the field of actuators and sensors. Advances in fundamental understanding of IPT performance mechanisms and tuning of the device components has primarily focused on transducers constructed with the commercial ionomer Nafion® due to its overall stability, high ionic conductivity, and availability. The much smaller number of studies conducted with non-perfluorosulfonated ionomers concentrated on changes in chemical composition to address processability, price, ionic conductivity, and hydrated modulus of the final IPT. Also, nearly all ionic polymer transducers operated with water as the diluent until the recent successful development of IPTs with ionic liquids.

The objective of this research is to increase the understanding of electromechanical transduction in ionic polymer transducers through the synthesis and characterization of novel branched ionomers. Controlled branching is achieved in sulfonated polysulfones (sBPS) through employment of an oligomeric A2 + B3 step-growth polymerization. Structure – property relationships are established for a series of linear and branched sulfonated polysulfones to resolve the effects of polymer topology and charge content on ionomer properties such as hydrated modulus and ionic conductivity. Furthermore, the variation of these parameters is investigated in the presence of ionic liquids as a function of ionic liquid uptake using two methods for introduction of the diluent. One of those methods, based on casting of IPT components in the presence of the ionic liquid, was applied to the Direct Application Process to produce a controlled set of IPT electrodes and transducers to investigate percolation effects of RuO2 on the device’s electrical properties and actuation characteristics. Equivalent circuit modeling of the component and transducer electrical impedance accurately modeled variations in contributing processes and material interfaces to estimate the evolution of effective capacitance based on the electrode composition.

Combination of optimized electrode composition, ionic liquid uptake, and the series of linear and branched sulfonated polysulfones allowed for fabrication of a tailored set of novel ionic polymer transducers. Effects of the fabrication process on the ionic conductivity of the membranes and transducers are evaluated using electrical impedance spectroscopy, which also allowed for equivalent circuit modeling to calculate effective capacitance for the series of IPTs that varied in composition, topology, and uptake for both types of fabrication processes. The transducers described in this dissertation are the first IPTs to be designed and actuated with novel ionomers, specifically linear and branched sulfonated polysulfones, in the presence of ionic liquids. Use of sulfonated polysulfones allowed for realization of transducers with high uptakes of the ionic liquid diluent that retained significant hydrated modulus on the order of 2 GPa. Characterization of electromechanical transduction for the series of sBPS – IPTs was demonstrated in cantilever bending through frequency response analysis and step responses in the time domain to low input voltages. Both the ion content and polymer topology of the sBPS ionomeric matrix demonstrated a significant effect on the final actuation performance in relation to variations in charge transport. Also, IPTs constructed with a co-diluent swelling method which emphasized the formation and stability of the ionomer’s charge transport pathway demonstrated the greatest actuation responses, up to a peak-to-peak strain of ~0.45 % and strain rates on the order of 0.1 % / s while producing significant blocked force (180 N/V•m). Combination of these actuation performance metrics resulted in maximum energy densities of 1150 mJ/kg and 2.23 mJ/mm3 for the corresponding IPT.

  Filename       Size       Approximate Download Time (Hours:Minutes:Seconds) 
 28.8 Modem   56K Modem   ISDN (64 Kb)   ISDN (128 Kb)   Higher-speed Access 
  Duncan_AJ_D_2009_final.pdf 5.39 Mb 00:24:57 00:12:50 00:11:13 00:05:36 00:00:28

Browse All Available ETDs by ( Author | Department )

dla home
etds imagebase journals news ereserve special collections
virgnia tech home contact dla university libraries

If you have questions or technical problems, please Contact DLA.