Type of Document Master's Thesis Author Bhatia, Sanjay URN etd-11152013-040441 Title Software tools for computer-controlled fatigue testing Degree Master of Science Department Electrical Engineering Advisory Committee
Advisor Name Title Charles E. Nunnally Committee Co-Chair Norman E. Dowling Committee Co-Chair William Luse Committee Member Keywords
Date of Defense 1986-09-05 Availability restricted Abstract
Past efforts at implementing Load Spectrum Generation and Neuber Control have centered around minicomputers and analog circuits. The use of a personal computer to implement the tasks is presented. On implementation of the load Spectrum Generation software, the response of the Materials Testing System was investigated for distortion and attenuation. In particular, the effect of the resolution of the waveform on the test system response was noted. There was negligible attenuation for full scale frequencies of up to 20 Hz. Greater waveform resolution was required at lower frequencies than at higher frequencies. On implementation of the Neuber Control program, the accuracy obtained at the Neuber hyperbolas was noted. Better accuracy was obtained at ramp frequencies below 0.1 Hz.
Based on the results obtained after implementing the Load Spectrum Generator program and the Neuber Control program, the performance of the personal computer in controlling fatigue tests is evaluated. Cost effectiveness and versatility favor the use of a personal computer for the control of fatigue tests.
Filename Size Approximate Download Time (Hours:Minutes:Seconds)
28.8 Modem 56K Modem ISDN (64 Kb) ISDN (128 Kb) Higher-speed Access LD5655.V855_1986.B534.pdf 5.19 Mb 00:24:03 00:12:22 00:10:49 00:05:24 00:00:27
If you have questions or technical problems, please Contact DLA.