Type of Document Master's Thesis Author Ghose, Dhrubajyoti URN etd-12052009-020042 Title Finite element formulation of a thin-walled beam with improved response to warping restraint Degree Master of Science Department Aerospace and Ocean Engineering Advisory Committee
Advisor Name Title Hughes, Owen F. Committee Chair Johnson, Eric R. Committee Member Nikolaidis, Efstratios Committee Member Keywords
Date of Defense 1991-03-15 Availability restricted Abstract
Linear elastic theory of torsion and flexure of thin-walled beams as developed by Vlasov and Timoshenko respectively are well known and commonly used in everyday engineering practice. However there are noticeable differences between calculations and experimental results. The difference is partly due to one of the basic assumption of classical theory, namely that the secondary shear strains due to warping are negligible.
In the present work a new three noded, with CO continuity, isoparametric beam finite element is developed based on a torsion theory by Benscoter. In the classical theory warping is assumed to be proportional to the rate of twist, whereas in Benscoter's theory it is assumed to be proportional to an independent quantity called the "warping function".
The exact form of this function can be evaluated from equilibrium equations. This assumption of Benscoter's allows the formulation of a Co element based on the assumed displacement method. The other advantage of Benscoter's theory is that it takes into account the effects of secondary shear strains. These effects are quite significant for closed sections. The element is validated for several cases of a cantilevered beam of rectangular cross section and in every case the results are in good agreement with the exact solution.
It is also shown that the element gives a very good representation of curved beams, for which there is torsional-flexural coupling. A number of cases of a curved I-beam under various loading and boundary conditions are analysed, and in every case the results agree closely with the analytical solution.
In order to represent the torsional response the element uses seven degrees of freedom per node. This seventh degree of freedom is the "warping function" mentioned earlier.
To make the element compatible with standard finite-element programs which have six degrees of freedom per node, static condensation is used.
Filename Size Approximate Download Time (Hours:Minutes:Seconds)
28.8 Modem 56K Modem ISDN (64 Kb) ISDN (128 Kb) Higher-speed Access LD5655.V855_1991.G567.pdf 1.74 Mb 00:08:02 00:04:08 00:03:37 00:01:48 00:00:09
If you have questions or technical problems, please Contact DLA.