Title page for ETD etd-12192014-015850


Type of Document Master's Thesis
Author He, Long
URN etd-12192014-015850
Title A STUDY OF IMMERSED BOUNDARY METHOD IN A RIBBED DUCT FOR THE INTERNAL COOLING OF TURBINE BLADES
Degree Master of Science
Department Mechanical Engineering
Advisory Committee
Advisor Name Title
Danesh Tafti Committee Chair
Clinton Dancey Committee Member
Srinath Ekkad Committee Member
Keywords
  • turbine heat transfer
  • Immersed boundary method
  • wall model
  • internal cooling
Date of Defense 2014-12-08
Availability unrestricted
Abstract
In this dissertation, Immersed Boundary Method (IBM) is evaluated in ribbed duct geometries to show the potential of simulating complex geometry with a simple structured grid. IBM is first investigated in well-accepted benchmark cases: channel flow and pipe flow with circular cross-section. IBM captures all the flow features with very good accuracy in these two cases. Then a two side ribbed duct geometry is test using IBM at Reynolds number of 20,000 under fully developed assumption. The IBM results agrees well with body conforming grid predictions. A one side ribbed duct geometry is also tested at a bulk Reynolds number of 1.5×〖10〗^4. Three cases have been examined for this geometry: a stationary case; a case of positive rotation at a rotation number (Ro=ΩD_h/U) of 0.3 (destabilizing); and a case of negative rotation at Ro= -0.3 (stabilizing). Time averaged mean, turbulent quantities are presented, together with heat transfer. The overall good agreement between IBM, BCG and experimental results suggests that IBM is a promising method to apply to complex blade geometries. Due to the disadvantage of IBM that it requires large amount of cells to resolve the boundary near the immersed surface, wall modeled LES (WMLES) is evaluated in the final part of this thesis. WMLES is used for simulating turbulent flow in a developing staggered ribbed U-bend duct. Three cases have been tested at a bulk Reynolds number of 〖10〗^5: a stationary case; a positive rotation case at a rotation number Ro=0.2; and a negative rotation case at Ro=-0.2. Coriolis force effects are included in the calculation to evaluate the wall model under the influence of these effects which are known to affect shear layer turbulence production on the leading and trailing sides of the duct. Wall model LES prediction shows good agreement with experimental data.

Files
  Filename       Size       Approximate Download Time (Hours:Minutes:Seconds) 
 
 28.8 Modem   56K Modem   ISDN (64 Kb)   ISDN (128 Kb)   Higher-speed Access 
  He_L_T_2014.pdf 5.90 Mb 00:27:20 00:14:03 00:12:18 00:06:09 00:00:31

Browse All Available ETDs by ( Author | Department )

dla home
etds imagebase journals news ereserve special collections
virgnia tech home contact dla university libraries

If you have questions or technical problems, please Contact DLA.