Browse Available ETDs by Department: M

Browse by: Department Author

A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z | All

Author Name Title Department Date/Time

Chen, Yu Synthesis and Characterization of Hydrophobic-Hydrophilic Multiblock Copolymers for Proton Exchange Membrane Applications Macromolecular and Science Engineering 2011-10-06
Dong, Shuping Effects of acid hydrolysis conditions on cellulose nanocrystal yield and properties: A response surface methodology study Macromolecular and Science Engineering 2014-05-09
Fox, Stephen Carter Regioselective Synthesis of Novel Cellulose Derivatives for Drug Delivery Macromolecular and Science Engineering 2011-11-15
Huffstetler, Philip Plaxico Synthesis and Characterization of Well-Defined Heterobifunctional Polyethers for Coating Magnetite and Their Applications in Biomedicine Resonance Imaging Macromolecular and Science Engineering 2009-10-01
Jain, Vaibhav Applications of Layer-by-Layer Films in Electrochromic Devices and Bending Actuators Macromolecular and Science Engineering 2009-09-08
Jiang, Feng Effects of the Non-ionic Surfactant Tween 80 on the Enzymatic Hydrolysis of Model Cellulose and Lignocellulosic Substrates Macromolecular and Science Engineering 2011-09-23
Kalhor, Roozbeh Accelerated Testing Method to Estimate the Lifetime of Polyethylene Pipes Macromolecular and Science Engineering 2017-02-28
Osborn, Angela Michelle Investigation of Phase Morphology and Blend Stability in Ionomeric Perfluorocyclobutane (PFCB)/Poly(vinylidene difluoride) (PVDF) Copolymer Blend Membranes Macromolecular and Science Engineering 2010-11-17
Pothayee, Nikorn Development of Core-Shell Polymeric Nanostructures for Delivery of Diagnostic and Chemotherapeutic Agents Macromolecular and Science Engineering 2010-12-17
Vadala, Timothy Patrick Cooperative Electrostatic Polymer-Antibiotic Nanoplexes Macromolecular and Science Engineering 2010-06-07
Wang, Ji Suspended Micro/ nanofiber Hierarchical Scaffolds for Studying Cell Mechanobiology Macromolecular and Science Engineering 2015-02-20
Arca, Hale Cigdem The Design of Polyelectrolyte Multilayers Using Galactosylated Chitosan Macromolecular Science and Engineering 2012-05-09
Badami, Anand Shreyans Bioresorbable Electrospun Tissue Scaffolds of Poly(ethylene glycol-b-lactide) Copolymers for Bone Tissue Engineering Macromolecular Science and Engineering 2004-10-24
Badami, Anand Shreyans Morphological and Structure-Property Analyses of Poly(arylene ether sulfone)-Based Random and Multiblock Copolymers for Fuel Cells Macromolecular Science and Engineering 2007-11-05
Baranauskas, Victor Vincent Cobalt Nanoparticle-Macromolecular Complexes and Their Conversion to Oxidatively Stable Entities Macromolecular Science and Engineering 2005-04-27
Benson, Sonya Denese The Effect of Nanoscale Particles and Ionomer Architecture on the Crystallization Behavior of Sulfonated Syndiotactic Polystyrene Macromolecular Science and Engineering 2011-02-06
Caba, Beth Lynn Solution and Adsorption Characterization of Novel Water-Soluble Ionic Block Copolymers for Stabilization of Magnetite Nanoparticles Macromolecular Science and Engineering 2007-05-09
Carmichael-Baranauskas, Anita Yvonne Synthesis of Amphiphilic Block Copolymers for Use in Biomedical Applications Macromolecular Science and Engineering 2010-04-16
Chowdhury, Sudip Advancing characterization techniques for structure-property determination of in-situ lignocelluloses Macromolecular Science and Engineering 2011-08-22
Cunningham, Brent David The Development of Compression Moldable Polymer Composite Bipolar Plates for Fuel Cells Macromolecular Science and Engineering 2007-02-14
Das, Sudipto Wood/Polymeric Isocyanate Resin Interactions: Species dependence Macromolecular Science and Engineering 2005-08-21
Divoux, Gilles Michel Marc Properties and Performance of Polymeric Materials Used in Fuel Cell Applications Macromolecular Science and Engineering 2012-03-06
Duncan, Andrew Jay Synthesis and Characterization of Branched Ionomers for Performance in Ionic Liquid – Swollen Ionic Polymer Transducers Macromolecular Science and Engineering 2009-11-13
Einsla, Brian Russel High Temperature Polymers for Proton Exchange Membrane Fuel Cells Macromolecular Science and Engineering 2005-04-26
Fornof, Ann R. Synthesis and Characterization of Multiphase, Highly Branched Polymers Macromolecular Science and Engineering 2006-04-21
Goff, Jonathan Synthesis and Characterization of Novel Polyethers and Polydimethylsiloxanes for Use in Biomaterials Macromolecular Science and Engineering 2009-02-23
Hill, Melinda Lou Polymeric and Polymer/Inorganic Composite Membranes for Proton Exchange Membrane Fuel Cells Macromolecular Science and Engineering 2006-04-11
Hunley, Matthew T Influence of Electrostatic and Intermolecular Interactions on the Solution Behavior and Electrospinning of Functional Nanofibers Macromolecular Science and Engineering 2010-09-09
Johnson, Harry Dale Synthesis, Characterization, Processing and Physical Behavior of Melt-Processible Acrylonitrile Co- and Terpolymers for Carbon Fibers: Effect of Synthetic Variables on Copolymer Synthesis Macromolecular Science and Engineering 2006-05-08
Johnson, Richard Kwesi TEMPO-oxidized Nanocelluloses: Surface Modification and use as Additives in Cellulosic Nanocomposites Macromolecular Science and Engineering 2010-10-22
Lane, Ozma Redd Characterization of Structure-Property Relationships in Hydrophilic-Hydrophobic Multiblock Copolymers for Use in Proton Exchange Membrane Fuel Cells Macromolecular Science and Engineering 2011-12-08
Layman, John Structure-Property-Transfection Relationships in Polycation-mediated Non-viral DNA Delivery Macromolecular Science and Engineering 2008-11-18
Lee, Hae-Seung Synthesis and Characterization of Multiblock Copolymer Proton Exchange Membranes for High Temperature Fuel Cell Applications Macromolecular Science and Engineering 2009-05-07
Li, Yanxiang The Influence of Aromatic Disulfonated Random and Block Copolymers' Molecular Weight, Composition,and Microstructure on the Properties of Proton Exchange Membranes for Fuel Cells Macromolecular Science and Engineering 2007-09-16
Liu, Dan Durability study of proton exchange membrane fuel cells via experimental investigations and mathematical modeling Macromolecular Science and Engineering 2006-07-18
Maheshwari, Vivek Chandra Large area electro-optical tactile sensor:Characterization and design of a polymer, nanoparticle based tunneling device Macromolecular Science and Engineering 2006-12-24
Mefford, Olin Thompson Physical Properties of Macromolecule-metal oxide nanoparticle complexes: Magnetophoretic Mobility, Size, and Interparticle Potentials Macromolecular Science and Engineering 2007-06-26
Mejia-Ariza, Juan Manuel Framework for Concentrated Strain Deployable Trusses Macromolecular Science and Engineering 2008-05-22
Mejia-Ariza, Raquel Design, Synthesis, and Characterization of Magnetite Clusters using a Multi Inlet Vortex Mixer Macromolecular Science and Engineering 2010-11-01
Navarro, Fernando Cellulose Nanocrystals: Size Characterization and Controlled Deposition by Inkjet Printing Macromolecular Science and Engineering 2010-07-19
Nebipasagil, Ali Chemically and Photochemically Crosslinked Networks and Acid-Functionalized Mwcnt Composites Macromolecular Science and Engineering 2011-05-17
Neyman, Patrick J Second-Order Nonlinear Optical Characteristics of Nanoscale Self-Assembled Multilayer Organic Films Macromolecular Science and Engineering 2004-07-07
Osborn, Shawn James Morphological and Mechanical Properties of Dispersion-Cast and Extruded Nafion Membranes Subjected to Thermal and Chemical Treatments Macromolecular Science and Engineering 2009-03-30
Ozturk, Gozde Topology and Telechelic Functionality Control in Polyester Design Macromolecular Science and Engineering 2009-06-12
Park, Jong Keun Anisotropic Morphologies and Properties in Perfluorosulfonate Ionomer-Based Materials Macromolecular Science and Engineering 2009-12-23
Paul, Mou Synthesis, crosslinking and characterization of disulfonated poly(arylene ether sulfone)s for application in reverse osmosis and proton exchange membranes Macromolecular Science and Engineering 2008-07-27
Pestrak, Michael Thomas The Effect of Catalyst Layer Cracks on the Mechanical Fatigue of Membrane Electrode Assemblies Macromolecular Science and Engineering 2010-10-20
Pillai, Karthik Bio-inspired Cellulose Nanocomposites Macromolecular Science and Engineering 2011-08-08
Ragheb, Ragy Tadros Synthesis and Characterization of Surface-Functionalized Magnetic Polylactide Nanospheres Macromolecular Science and Engineering 2008-04-09
Ren, Dakai Moisture-Cure Polyurethane Wood Adhesives: Wood/Adhesive Interactions and Weather Durability Macromolecular Science and Engineering 2010-12-01
Riedlinger, Darren Andrew Characterization of PF Resol/Isocyanate Hybrid Adhesives Macromolecular Science and Engineering 2008-02-27
Roy, Abhishek Structure Property Relationships of Proton Exchange Membranes Macromolecular Science and Engineering 2008-03-05
Supriya, Lakshmi Assembly of Conductive Colloidal Gold Electrodes on Flexible Polymeric Substrates using Solution-Based Methods Macromolecular Science and Engineering 2005-10-24
Trenor, Scott Russell Synthesis and Characterization of Tailored Photoactive Macromolecules Macromolecular Science and Engineering 2004-04-26
Vadala, Michael Lawrence Preparation and Functionalization of Macromolecule-Metal and Metal Oxide Nanocomplexes for Biomedical Applications Macromolecular Science and Engineering 2006-04-21
VanHouten, Desmond J Benign Processing of High Performance Polymeric Foams of Poly(arylene ether sulfone) Macromolecular Science and Engineering 2008-12-09
VanHouten, Rachael A Synthesis and Characterization of Hydrophobic-Hydrophilic Segmented and Multiblock Copolymers for Proton Exchange Membrane and Reverse Osmosis Applications Macromolecular Science and Engineering 2010-04-08
Velez-Garcia, Gregorio Manuel Experimental Evaluation and Simulations of Fiber Orientation in Injection Molding of Polymers Containing Short Glass Fibers Macromolecular Science and Engineering 2012-04-26
Wu, Tianyu Synthesis and Characterization of Zwitterion-Containing Acrylic (Block) Copolymers for Emerging Electroactive and Biomedical Applications Macromolecular Science and Engineering 2012-09-13
Yu, Xiang Synthesis and Characterization of Hydrophilic-Hydrophobic Disulfonated Poly(Arylene Ether Sulfone)-Decafluoro Biphenyl Based Poly(Arylene Ether) Multiblock Copolymers for Proton Exchange Membranes (PEMs) Macromolecular Science and Engineering 2008-04-03
Al-Ghamdi, Salem Mater The strategic implementation of acquisitions : the impact of human resource factors on acquired firm employees' perception about acquisition sucess Management 2005-10-24
Baker, W. Kevin The role of organizational commitment and job satisfaction in progressive withdrawal behaviors :testing a comprehensive model with integrated methodology Management 2007-10-03
Ball, Rebecca W. Adaptation vs selection : an examination of the impact of deregulation on strategic change in U.S. banks Management 2005-10-20
Bezold, Maureen P. Crisis Management in the Delivery of Women's Reproductive Health Care: Responding to Social Activism Management 1997-03-28
Bolon, Douglas Sinclair Beyond job satisfaction : a multidimensional investigation of the relationship between organizational commitment and organizational citizenship behaviors Management 2005-10-07
Braekkan, Kristian Finne Multilevel Determinants of Forecasting Effectiveness: Individual, Dyadic, and System Level Predictors and Outcomes Management 2010-08-08
Calongne, Lisa J. Self-efficacy for employee participation : an exploratory investigation Management 2006-08-14
Childers, Jr., John Stephen An Examination into Technological Timing Efforts: The Performance of Firms in the Personal Computer Industry Management 2005-12-13
D'Intino, Robert Stephen A Social Contract Perspective on Organizational Citizenship Behavior Management 1999-04-20
Echols, Ann Elizabeth Extending the Resource-Based View to Explain Venture Capital Firm Networks' Contributions to IPO Performance: A Study of Human-Based Factors Management 2000-11-18
Frey, Francis M. The Management of Justice through Accounts: Constructing Acceptable Justifications Management 1997-04-23
Gerde, Virginia Woods The Design Dimensions of the Just Organization: an Empirical Test of the Relation Between Organization Design and Corporate Social Performance Management 1998-06-30
Godwin, Jeffrey Linn The Impact of Transformational Leadership Behaviors on Follower Goal Commitment Management 1998-10-20
Goldsby, Michael G. New Organization Forms: An Examination of Alienation and Ideology in the Postindustrial Workplace Management 1999-01-29
Guffey, William Robert The role of organization communication in the implementation of a business unit strategy Management 2005-10-14
Hendry, Jamie R. Environmental NGOs and Business: A Grounded Theory of Assessment, Targeting, and Influencing Management 2002-05-06
Herdman, Andrew Orr Explaining the Relationship Between the Hr System and Firm Performance: a Test of the Strategic Hrm Framework. Management 2008-01-17
Hoell, Robert Craig Determinants of Union Member Attitudes Towards Employee Involvement Programs Management 1998-04-22
Houghton, Jeffery D. The Relationship between Self-Leadership and Personality: A Comparison of Hierarchical Factor Structures Management 2000-06-06
Ji, Fiona Xiaoying An international ambidexterity model to understand new venture internationalization and growth Management 2011-09-06
Krishnakumar, Sukumarakurup The Role of Emotional Intelligence and Job Emotional Requirements in Job Attitudes and Behavior Management 2008-05-22
Lamb, William G. The relationship between geographic proximity and strategic posture :a longitudinal study of the U.S. fiberoptics industry Management 2007-10-05
Lau, Rebecca S. Integration and Extension of Leader-Member Exchange and Organizational Justice and Individual- and Group-Levels of Analysis Management 2008-05-09
Li, Mingfang Environmental attributes, strategy-making comprehensiveness and firm performance Management 2005-10-19
Little, Beverly L. Effectiveness, performance, and motivation in a team-based environment Management 2005-10-21
Luthar, Harsh K. The two-way gender bias in management evaluations and decision making : evaluations of managers vs. evaluations of grievants Management 2007-02-02
McKinney, Arlise P Goal Orientation: A test of competing models Management 2003-12-08
McLaughlin, Josetta S. Operational social contract : application of relational contract theory to exploration of constraints on implementation of an employee assistance program Management 2005-10-10
Mu, Shaohua Carolyn Subsidiary Innovation and Diffusion: An Integrated Approach on Learning of Subsidiaries from Diverse Local Environments Management 2003-08-22
Murry, William D Leader-member exchange and work value congruence :a multiple levels approach Management 2008-06-06
Offstein, Evan Hayden The Upper-Echelon Perspective of Firm Competitive Behavior: Empirical Evidence from the U.S. Pharmaceutical Industry Management 2004-12-01
Oyler, Jennifer D. Core Self-Evaluations and Job Satisfaction: The Role of Organizational and Community Embeddedness. Management 2007-10-24
Park, Bong-Gyu A dynamic perspective of strategic groups and performance :a longitudinal study of the U.S. computer equipment industry, 1975-1989 Management 2008-07-28
Park, Byung-Jin Robert The Effects of Coopetition and Coopetition Capability on Firm Innovation Performance Management 2011-05-24
Schaupp , Gretchen Lina An Experimental Study of Psychological Contract Breach: The Effects of Exchange Congruence in the Employer - Employee Relationship Management 2012-04-05
Simerly, Roy L. Strategy and performance in a volatile environment : a study of the electronic computing industry Management 2006-02-01
Singal, Manisha Corporate Governance and Strategic Behavior: A Study of Acquisitions and CEO Compensation Practices of Publicly-Owned and Family-Controlled Firms in S&P 500 Management 2008-04-14
Srivastava, Manish Kumar Friends or Neighbors? The Effects of Inter-firm Networks and Clusters on Technological Innovations in the U.S. Semiconductor Industry Management 2007-10-10
Strempek, R. Barth The Effect of Strategic Orientation and Adaptability on Organizational Behaviors and Performance:
the Case of Electronic Commerce in the Hosiery Industry
Management 1997-05-01
Tan, J. Justin Perceived environment, strategic orientation, ownership effect and performance implications in a transition economy : an empirical study in the People's Republic of China Management 2005-10-26
VanSandt, Craig V. An Examination of the Relationship Between Ethical Work Climate and Moral Awareness Management 2001-08-29
Watson, George W Beyond the Psychological Contract: Ideology and the Economic Social Contract Management 1998-07-12
Williams, Felice Amanda Behavioral Responses to Interpersonal Conflict in Decision Making Teams: A Clarification of the Conflict Phenomenon Management 2009-11-18
Wimbush, James C Ethical climates and ethical behavior Management 2008-07-28
Wimbush, James C. A longitudinal examination of public recognition and employee absenteeism :an exploratory study Management 2012-09-08
Wu, Jiyun The Impact of Corporate Supplier Diversity Programs on Corporate Purchasers’ Decision-Making Regarding Women-Owned Enterprises: An Empirical Test Using the Theory of Planned Behavior Management 2008-04-10
Wu, Jinpei Entrepreneurial Orientation, Entrepreneurial Intent and New Venture Creation: Test of a Framework in a Chinese Context Management 2009-07-14
Xu, Yang Social Capital, Cognitions, and Firm Innovation: Theoretical Model and Empirical Studies Management 2006-06-14
Cheung, Gordon Wai-hung How goals affect performance :task complexity as a moderator on the cognitive processes of goal setting Management (General Business) 2008-06-06
Bergey, Paul K. A Decision Support System for the Electrical Power Districting Problem Management Science 2000-04-27
Hess, Traci J. A Study of Autonomous Agents in Decision Support Systems Management Science 1999-05-07
Kohers, Gerald The use of neural networks in the combining of time series forecasts with differential penalty costs Management Science 2005-10-21
Markham, Ina Samanta An exploration of the robustness of traditional regression analysis versus analysis using backpropagation networks Management Science 2008-06-06
McCart, Christina D Expert systems for financial analysis of university auxiliary enterprises Management Science 2008-09-09
O'Malley, Jr., John Richard Electronic Data Interchange: An Inventory Perspective of Its Economic Viability and Recommendations for Information Technology Driven Implementation Management Science 2000-02-15
Panis, Renato P Robust parameter optimization strategies in computer simulation experiments Management Science 2008-06-06
Shi, Ji The implementation of total quality management in China Management Science 2009-01-24
Siochi, Fernando C Building a knowledge based simulation optimization system with discovery learning Management Science 2008-06-06
Wiegmann, Lars Cost-based shop control using artificial neural networks Management Science 2008-06-06
Brande, Julia K. Computer Network Routing with a Fuzzy Neural Network Management Science and Information Technology 1997-11-07
Carter, Arthur E. Design and Application of Genetic Algorithms for the Multiple Traveling Salesperson Assignment Problem Management Science and Information Technology 2003-04-25
Falasca, Mauro Quantitative Decision Models for Humanitarian Logistics Management Science and Information Technology 2009-08-23
Hertweck, Bryan M. Examining Electronic Markets in Which Intelligent Agents Are Used for Comparison Shopping and Dynamic Pricing Management Science and Information Technology 2005-09-20
Novak, David Christopher A Methodology for Characterization and Performance Analysis of Connection-Based Network Access Technologies Management Science and Information Technology 2001-04-25
Scheibe, Kevin Paul A Spatial Decision Support System for Planning Broadband, Fixed Wireless Telecommunication Networks Management Science and Information Technology 2003-04-10
White, Sheneeta Williams Planning and Scheduling of Complex, High Value-Added Service Operations Management Science and Information Technology 2009-08-01
Cunningham, Brian The Impact of Reward Structure on Project Team Effectiveness Management Systems 2001-02-03
Burness, Mary Regel An evaluation of the effectiveness of Adlerian parent study groups after four weeks and after six weeks. Management, Housing, and Family Development 2010-05-19
Cable, Carolyn Virginia Participation of the aged in voluntary activity. Management, Housing, and Family Development 2012-06-10
Conley, Martha McClenny Motivation for parenthood, need satisfaction, and romantic love :a comparison between pregnant and nonpregnant teenagers Management, Housing, and Family Development 2012-11-29
Eisler, Terri A. Parental influence on the career choices of women : some cohort differences Management, Housing, and Family Development 2005-09-16
Hylton, Linda Sue Influences on family planning among low income women Management, Housing, and Family Development 2010-07-15
Kidd, Charlotte Ann Consumer preparedness, knowledge, and opinions about practices and regulations of the funeral industry Management, Housing, and Family Development 2008-10-30
Nunley, Phyllis Cassell A study of parental concerns regarding the care of school age children in Prince William County, Virginia. Management, Housing, and Family Development 2010-06-02
Sack, Alan Richard Development of a theory of contraceptive practices among single male and female college students. Management, Housing, and Family Development 2010-03-31
Smith, Susan A Child abuse referral processes and treatment methods. Management, Housing, and Family Development 2010-07-21
Spencer, Marilyn Sanderson Effects of clothing conformity on preschool children's social interactions. Management, Housing, and Family Development 2013-02-07
Whaley, Mary Elizabeth The development of the learning environment checklist for assessing the adequacy of learning environments in day care centers. Management, Housing, and Family Development 2010-07-07
Adkins, Natalie Ross Low Literate Consumers in a Literate Marketplace: Exploring Consumer Literacy and Its Impact Marketing 2001-12-09
Andrews, Rick L Temporal changes in marketing mix effectiveness Marketing 2008-07-28
Bao, Yeqing Effects of Parental Style and Power on Adolescent’s Influence in Family Consumption Decisions Marketing 2001-04-30
Bodur, H. Onur Understanding Preference Revision and Concession in Group Decisions Marketing 2000-10-02
Bristol, Terrence Aland Relying on brand equity : insights from consumer evaluation processes Marketing 2007-05-22
Carter, Jr., Larry Lee Consumer Attitudes Toward Cross-Border Brand Alliances: Adding A Consideration Of Country Of Origin Fit Marketing 2002-04-24
Claiborne, C. B. The development of dispositional measures of self-congruity and functional congruity Marketing 2005-10-19
Cole, Dennis An investigation into the effect of cognitive moral development on ethical judgments, intentions, and behavior Marketing 2008-06-06
Cook, Don Lloyd Governance Mechanisms as a Means of Increasing Consumer Trust in Online Exchanges: A Signaling Perspective Marketing 2003-04-02
Corus, Canan Emotional Certainty and Health Communications Marketing 2008-04-22
DelVecchio, Susan K. The salesperson-manager exchange relationship : the impact of competence, latitude and loyalty Marketing 2005-10-14
DeMoranville, Carol W. An investigation into price-quality tradeoffs :the effects of order of presentation and presentation of outlying alternatives Marketing 2008-06-06
Dobscha, Susan Women and the natural world and their marketplace activities Marketing 2008-06-06
Gao, Tao Effects of Relationship Quality on Customer Perceived Value in Organizational Purchasing Marketing 1998-08-03
Grzeskowiak, Stephan An Empirical Examination of Boundary Conditions of Relational Exchange Marketing 2006-04-17
Hess, Jr., Ronald L The Effects of Employee-Initiated Peripheral Service Failures on Customers' Satisfactions with the Service Organization Marketing 1999-05-27
Hu, Yu An Examination of Consumers’ Selective Word-of-Mouth Communication Process and its Consequences Marketing 2008-05-12
Hunt, Michelle R. The screening of new product concepts : information use and the effects of experience and expertise Marketing 2005-10-24
Ishida, Chiharu Bad Apples, Bad Barrels, and the Structure of Marketing Channel Relationships: Analyses of the Propensity for Opportunism and Opportunistic Behaviors Marketing 2007-05-08
Iyer, Gopalkrishnan R. The role of contracts, informal agreements and coalitions in assuring downstream coordination Marketing 2008-06-06
Kidwell, Blair L Emotional Intelligence in Consumer Behavior: Ability, Confidence and Calibration as Predictors of Performance Marketing 2004-05-08
Krishen, Anjala Selena When Comparison Becomes Contrast: Choice in an Oppositional Framework Marketing 2007-03-28
Larsen, Val Through the looking glass :a semiotic analysis and experimental test of pace and angle effects in television advertising Marketing 2007-08-27
Lee, Renee Gravios Uneasy Tensions in Health Care Delivery in a Rural Appalachian Coal Mining Community: Envisioning Alternative Solutions Marketing 1998-07-18
Littlefield, Jonathan Subculture of Deer Hunters and the Negotiation of Masculinity: An Ethnographic Investigation of Hunting in the Rural South Marketing 2006-11-20
Mallalieu, Lynnea Anne An Examination of the Influence of Consumer Motivation on Salesperson Appraisal and Emotional Response to Salesperson Behavior. Marketing 2000-02-25
Mandrik, Carter A. An Information Processing Perspective on Between-Brand Price Premiums: Antecedents and Consequences of Motivation Marketing 2003-04-27
Peter, Paula Caterina Emotional Reasoning and Decision Making: understanding and regulating emotions that serve people's goals. Marketing 2007-04-20
Pierce, Meghan Elizabeth Individual and Holistic Information Processing Marketing 2007-05-24
Pierce, Meghan Facial Expression Intelligence Scale (FEIS): Recognizing and Interpreting Facial Expressions and Implications for Consumer Behavior Marketing 2012-04-11
Saatcioglu, Bige The Social Construction of Poverty and the Meaning of Deprivation: An Ethnographic Exploration of Mobile Home Park Residents Marketing 2009-08-14
Saboo, Pallabi A decision model to aid entry-mode strategy selection Marketing 2009-09-12
Shapiro, Jon M. The role of cultural sensitivity and trust in relational marketing : an analysis of buyer/seller relationships in the Asian Pacific Rim Marketing 2005-10-26
Sheng, Shibin Bundling and Consumer Evaluations of Individual Bundle Components Marketing 2004-04-29
Su, Chenting Modeling Spousal Family Purchase Decision Behavior: A Dynamic Simultaneous Equations Approach Marketing 1999-10-19
van Gelder, Brenda A. Exploring the Feasibility of a Strategic Alliance Approach to Telecommunications Provision in Rural Municipalities Marketing 2004-04-28
Vashi, Vidyut H The effect of price, advertising, and income on consumer demand :an almost ideal demand system investigation Marketing 2008-06-06
Wagner, Judy A. A contingency approach to the effectiveness of agenda sales strategies Marketing 2006-11-08
Wright, Newell D Consumption and home ownership :the evolving meaning of home Marketing 2008-06-06
Xenakis, Gina Marie Living with Chordoma Online: A Thematic Analysis of User’s Experiences in an Online Cancer Support Group Marketing 2009-05-13
Zhou, Zheng Achieving Late-Mover Advantage: The Effects of Enhancing and Distinctive Strategies Marketing 2002-04-18
Bath, Kara B A qualitative study of couples’ experience of the Preventative and Relationship Enhancement Program Marriage and Family Therapy 2010-09-21
Boykin, Esther Laree Successful Teenage Marriages: A Qualitative Study of How Some Couples Have Made It Work Marriage and Family Therapy 2004-09-21
Bradley, Peter Douglas Towards a theory of family therapy :rediscovering the influence of Don D. Jackson Marriage and Family Therapy 2008-06-06
Bridgforth, Myra Binns Relapse prevention with adolescent substance abusers and their families Marriage and Family Therapy 2010-04-27
Cooley, Susan R In their own words :an analysis of personal narratives from fathers' perspectives on the death of a child Marriage and Family Therapy 2008-06-06
Daly, Kathryn L. A Description of the Change Processes Experienced by Female Victims of Intimate Partner Violence when They and Their Male Partners End the Violence and Maintain Their Relationships Marriage and Family Therapy 2004-09-13
Donovan, Sarah Penelope Stress and Coping Techniques in Successful Intercultural Marriages Marriage and Family Therapy 2004-12-22
Goldberg, Peter David An exploratory study about the impacts that Cybersex (the use of the Internet for sexual purposes)is having on families and the practices of marriage and family therapists Marriage and Family Therapy 2004-04-26
Green, Narkia Monique Exploring the Experience of Race-related Stress and Marital Satisfaction among African American Married Couples Marriage and Family Therapy 2007-07-10
Habben, Christopher M. Differentiation as a Predictor of Extramarital Involvement Marriage and Family Therapy 2000-06-06
Johnson, H. Jermaine Examining Family Structure and Parenting Processes as Predictors of Delinquency in African-American Adolescent Females Marriage and Family Therapy 2005-09-29
Jordal, Christian Edward “Making it Work”: A Grounded Theory of How Mixed Orientation Married Couples Commit, Sexually Identify, and Gender Themselves Marriage and Family Therapy 2011-05-11
Lemon, Stephen C. Developing a school-based referral system :comparison of factors cited by school counselors and therapists Marriage and Family Therapy 2012-11-17
Linville, Deanna Christine The Analysis of Extracurricular Activities and Parental Monitoring and Their Relationship to Youth Violence Marriage and Family Therapy 2000-08-08
McLaurin, Shamla L. Childhood Experiences of Sibling Abuse: An investigation into learned helplessness Marriage and Family Therapy 2005-04-25
McNamee, Carole M Bilateral Art: An Integration of Marriage and Family Therapy, Art Therapy, and Neuroscience Marriage and Family Therapy 2004-02-14
McPherson, Mary Elizabeth Parenting Behavior, Adolescent Depression, Alcohol Use, Tobacco Use, and Academic Performance: A Path Model Marriage and Family Therapy 2004-08-14
Miller, John K. Walk-in single session therapy : a study of client satisfaction Marriage and Family Therapy 2006-05-11
Miller, Deborah L. E. Family functioning and its relationship to recommended status with the juvenile court system Marriage and Family Therapy 2012-11-20
Mojta, Carl Andrew Internal Family Systems' Influence on Beginning Therapists' Awareness of Internal Processes: A Qualitative Study Marriage and Family Therapy 2011-12-03
Moon, Elizabeth Wedemeyer Flow: Family Dynamics and Adolescent Experiences in Soccer Marriage and Family Therapy 2003-04-11
Pankow, Shannon Anderson Career Practices and Training Perspectives of Marriage and Family Therapy Program Graduates Marriage and Family Therapy 2000-09-13
Paris, Eleni Marriage and Family Therapist Interns' Experiences of Growth Marriage and Family Therapy 2000-08-22
Penn, Carrie E. An exploratory study of female partner aggression: The role of relationship dynamics Marriage and Family therapy 2002-08-04
Powell, Courtney Christine Families under stress: Using the Double ABCX model to understand attachment relationships in families during military deployment Marriage and Family Therapy 2008-05-05
Sharp, Erin Colleen Clergywomen and Role Management: A Study of PC(USA) Clergywomen Negotiating Maternity Leave Marriage and Family Therapy 2012-05-07
Stoppelman, Lynn Ballard Intimate Partner Violence in Heterosexual Couples Viewed Through the Lens of Attachment Marriage and Family Therapy 2004-07-31
Viers-Yaun, Dawn Career and Relationship Satisfaction among Female Faculty in MFT Programs Marriage and Family Therapy 2003-04-13
Ward, David Benson Evaluating Therapy Effectiveness in an Mft Training Clinic: Current Practices and Recommendations for the Future Marriage and Family Therapy 2002-05-20
Amanuma, Kazushi Dielectric properties of PFN-PFT solid solution synthesized by the molten salt method Materials Engineering 2010-01-20
Battu, Laurent P Corrosion resistance of modified β-Eucryptite Materials Engineering 2009-08-14
Brady, Michael P Evaluation of laser surface melting to mitigate chloride stress corrosion cracking in an austenitic stainless steel Materials Engineering 2009-03-12
Cardozo, Antonio Fernando Cabral Computer simulation of grain boundary multiplicity in Ni{u2083}Al Materials Engineering 2009-09-05
Carr, Kathryn E Evaluation of modified dry limestone process for flue gas desulfurization Materials Engineering 2010-06-22
Chiu, Chienchia Low temperature synthesis and properties of lead ferroniobate Pb(Fe0-5Nb0-5)O3 Materials Engineering 2009-04-07
Collins, William D Chemical treatment of corroding steel reinforcement after removal of chloride contaminated concrete Materials Engineering 2009-08-18
Dehan, Christophe F. An intelligent workstation for reliable residual stress determination using x-ray diffraction Materials Engineering 2012-06-10
Gentile, Maria Alkali attack of coal gasifier refractrry [sic] lining Materials Engineering 2012-11-14
Giridhar, Jayaramachandran Preparation and characterization of Mo/Al layered thin films Materials Engineering 2013-02-06
Gonzalez, Sandra C. Preparation and characterization of new porous ceramic filters for hot gas clean-up Materials Engineering 2009-12-05
Grzeskiewicz, Ronald Effect of hydrogen on the coefficient of friction of iron Materials Engineering 2010-04-12
Guerin, Pascal Claude Raymond Development of measurement techniques for evaluation of inhibitors for controlling rebar corrosion in concrete Materials Engineering 2009-03-24
Halley, William G. Evaluating abrasive wear resistance of extruder tooling materials using the dry sand rubber wheel abrasion test Materials Engineering 2009-04-14
Hwang, Yawlin Dynamic electromechanical measurements of carbon black loaded SBR Materials Engineering 2010-07-21
Iyer, Venkatramani S. Effect of residual stress gradients in austenitic stainless steels on stress corrosion cracking Materials Engineering 2009-04-18
Kim, Regina H. Siloxane modified polyurea and polyurethane urea segmented copolymers Materials Engineering 2012-08-01
Lawson, Glenn E. The effects of evaporation rate, solvent, and substrate on the surface segregation of block copolymers Materials Engineering 2009-03-04
Liu, Dean-Mo The development and characterization of lightweight (CA,MG) ceramics Materials Engineering 2009-10-10
Miller, Jean P. Long-term thermal/chemical degradation of ceramic candle filter materials Materials Engineering 2010-03-17
Morgan, Nancy Abigail The effects of thermal cycling on residual stresses in thick- walled stainless steel pipe Materials Engineering 2009-04-08
Petton, Guy J Computer simulation study of grain boundary structure in B2 NiAl Materials Engineering 2009-03-12
Ranganathan, Kannan A simulation model for stress measurements in notched test specimens by x-ray diffraction Materials Engineering 2012-11-20
Rivet, Frederic C Hydrogen embrittlement of Aluminum-Lithium alloys Materials Engineering 2009-03-14
Rodrigues, David Ernest Structure property relationships in track pad rubber as a function of blending conditions Materials Engineering 2013-02-06
Russell, Laura M. Thermal conductivity/diffusivity of SiC-Mullite and SiC-SiC composites Materials Engineering 2013-02-07
Sabata, Ashok Characterization of the adhesive interface between rubber and brass plated steel tire cords Materials Engineering 2012-11-20
Sen, Sidhartha Electrical studies on ion-etched n-GaAs(100) surfaces Materials Engineering 2012-11-20
Somers, Bruce R. Effect of dislocation substructure on the primary creep behavior of alpha titanium at elevated temperature. Materials Engineering 2013-02-07
Tricard, Marc J. M. An expert system for the validation and interpretation of x-ray residual stress data Materials Engineering 2009-10-24
Tu, Jie Thermal expansion of chemically modified mullite Materials Engineering 2012-06-10
Van Aken, Stephen Mark Thermal expansion and thermal conductivity of (Ca1-x,Mgx)Zr4(PO4)6 where x = 0.0-0.4 Materials Engineering 2009-04-18
Vandenbossche, Benoit Measurement of ultrasonic wave mode transition in unidirectional graphite/epoxy composites Materials Engineering 2009-10-24
Vass, Raymond J Alkali attack on ceramic filters Materials Engineering 2009-04-14
Zhang, Tong Electrical conduction transport mechanisms of barium titanate- based multilayer ceramic capacitors Materials Engineering 2012-06-10
Feth, Shari A study of the promolecule radius of nitrides, oxides and sulfides and of the bond critical point properties of the electron density distribution in nitrides Materials Engineering and Science 2006-05-04
Rodrigues, David Ernest Microwave curing of hybrid inorganic-organic ceramers and some additional structural features of these material Materials Engineering and Science 2007-07-11
Arnold, Cynthia A. Structure-property behavior of polyimide homopolymers, copolymers, and blends Materials Engineering Science 2005-09-16
Bang, Jaecheol Sintering of glass films on rigid substrates studied by optical techniques Materials Engineering Science 2006-08-14
Betrabet, Chinmay Suresh Inorganic-organic hybrid materials and abrasion resistant coatings based on a sol-gel approach Materials Engineering Science 2005-10-26
Bhatt, Hemanshu D Effect of interfacial thermal conductance and fiber orientation on the thermal diffusivity/conductivity of unidirectional fiber-reinforced ceramic matrix composites Materials Engineering Science 2008-07-28
Brandom, Donald Keith Crystallization and melting behavior of an aromatic semicrystalline polyimide, LaRC CPI-2 Materials Engineering Science 2007-10-03
Brennan, Anthony Bartholomew Structure/property behavior of inorganic/organic sol-gel derived hybrid materials Materials Engineering Science 2005-09-16
Brown, Janis Michelle Production of controlled networks and morphologies in toughened thermosetting resins using real-time, in-situ cure monitoring Materials Engineering Science 2005-11-10
Bucher, Richard A. High performance thermoplastic matrix composite processing : dry powder prepregging, plasma treatment, consolidation/crystallization analysis Materials Engineering Science 2005-10-03
Cham, Pak-Meng Study of the miscibility, crystallization and morphology in poly(propylene) based blends and copolymers Materials Engineering Science 2008-06-06
Chang, Yeou Shin The effect of the interphase/interface region on creep and creep rupture of thermoplastic composites Materials Engineering Science 2008-06-06
Chen, Zhizhang Photovoltaic modeling and grain boundary recombination in poly- silicon Materials Engineering Science 2005-09-16
Chen, Gang The role of interfacial structure in the evolution of precipitate morphology Materials Engineering Science 2005-10-21
Chen, Tze-Chiun Structure and properties interrelationships of SrBiSrBi₂‪(‬Ta₁₋̳xNb̳x‪)‬₂O₉ Materials Engineering Science 2007-08-27
Chen, Jhewn-Kuang The role of defects during precipitate growth in a Ni-45wt% Cr alloy Materials Engineering Science 2008-06-06
Chin, Joannie W Surface characterization and adhesive bonding of carbon fiber-reinforced composites Materials Engineering Science 2007-10-03
Chiu, Chienchia Chemical vapor deposition of gbs-SiC thin films on Si(100) in a hot wall reactor Materials Engineering Science 2006-06-19
Clark, Richard L. Influence of the Interphase on the Mechanical Properties of Nylon 66 Composites Materials Engineering Science 1998-07-12
Commerçon, Pascal Surface characterization of plasma treated carbon fibers and adhesion to polyethersulfone Materials Engineering Science 2007-08-23
Cornélis, Hélène Thérèsa Effect of intermediate solvents on poly(ether ether ketone) Materials Engineering Science 2008-06-06
Dallas, George Fundamental experiments on the response of solutions, polymers, and modified polymeric materials to electromagnetic radiation Materials Engineering Science 2008-07-28
Dav, Vipul Cellulose-based fibers from liquid crystalline solutions Materials Engineering Science 2007-08-23
DiFrancia, Clene The single fiber pull-out test :a study of fiber/matrix interactions Materials Engineering Science 2008-07-28
Ely, Kevin Jon Piezoelectric effects in GaAs MESFET's Materials Engineering Science 2005-10-20
Facinelli, John Victor The preparation of high performance polymers for composites and blends : A) thermally stable ion containing polymers B) epoxy and hydroxy functional polyolefin macromers Materials Engineering Science 2006-10-19
Gaynor, Justin F. Polymeric thin films by chemical vapor deposition for the microelectronics industry Materials Engineering Science 2006-08-14
Ghasemi, Hamid-Reza M. R. Fundamental studies of the tribological behavior of thin polymeric coatings in fretting contact using infrared and photo/video techniques Materials Engineering Science 2006-10-04
Halley, William G. Fracture path transitions in peels tests of medium carbon steel spot welds Materials Engineering Science 2008-07-28
He, Baoping X-ray diffraction from point-like imperfection Materials Engineering Science 2008-09-23
Hedrick, Jeffrey C. High performance polymeric networks and thermoplastic blends : microwave versus thermal processing Materials Engineering Science 2007-07-12
Hirschfeld, Deidre A. Failure analysis of notched graphite-epoxy tubes Materials Engineering Science 2008-08-25
Hofmann, Klaus Synthesis, properties, and morphology of lignin based epoxy resins Materials Engineering Science 2007-02-26
Ifju, Peter G. The shear gage and compact shear specimen for shear property measurements of composite materials Materials Engineering Science 2005-10-19
Jang, Ho Grain boundary studies in ordered intermetallic compound Ni3 Al Materials Engineering Science 2005-10-10
Joardar, Saikat Sutej Siloxane modified hybrid materials by the sol-gel process Materials Engineering Science 2008-07-28
Kang, Chiun-Chia Moisture and stress effects on fretting between steel and polyimide coatings Materials Engineering Science 2008-06-06
Kim, DongSu Studies on the reactivity of thiophosphate/thiophosphinate and ethyl xanthate with precious metals Materials Engineering Science 2005-10-21
Kwok, Chi Kong Processing - structure - property interrelationships of ferroelectric thin films with emphasis on formation kinetics Materials Engineering Science 2006-10-19
Lee, Kyoung-Ho Synthesis and characterization of in situ whisker-reinforced glass-ceramics Materials Engineering Science 2006-06-19
Lee, Yong-Joon Structure-property behavior of novel high performance thermoplastic and thermoset structural adhesives and composite matrix resins Materials Engineering Science 2008-06-06
Li, Min-Chung Thermoplastic composite consolidation Materials Engineering Science 2005-10-20
Li, Chen-Chung Ion assisted deposition of multicomponent thin films Materials Engineering Science 2005-10-20
Liang, Qiang Interfacial structure of delta phase in Inconel 718 and the selection of precipitate habit planes Materials Engineering Science 2006-05-11
Liao, Kin Tensile and uniaxial/multiaxial fatigue behavior of ceramic matrix composites at ambient and elevated temperatures Materials Engineering Science 2005-10-20
Liptak, Stephen C. Modification, curing and flame retardation of epoxy resin networks Materials Engineering Science 2006-11-08
Liu, Qin Poly(2-alkyl-2-oxazoline) containing multiphase systems Materials Engineering Science 2007-05-22
Muellerleile, Joan Théresè Polesnak Crystallization behavior and morphological features of two LARC polyimides and local orientation studies of two semicrystalline model composites Materials Engineering Science 2007-08-08
Nagpal, Vidhu JaiKishen In-situ steric stablization of ultrafine titania particles synthesized by a sol-gel process Materials Engineering Science 2008-07-28
Namboodri, Shannon Leahy Processing and characterization of ceramic superconductor/polymer composites Materials Engineering Science 2008-06-06
Nettles, A. T The effects of tensile preloads on the impact response of carbon/epoxy laminates Materials Engineering Science 2008-06-06
Oliveira, Willer de Multiphase star-like copolymers containing lignin :synthesis, properties and applications Materials Engineering Science 2008-07-28
Osiroff, Ricardo Damorheology : creep-fatigue interaction in composite materials Materials Engineering Science 2007-07-11
Patel, Niranjan M. Multicomponent network and linear polymer systems: thermal and morphological characterization Materials Engineering Science 2007-07-12
Peng, Chien-Hsiung Optical property studies and metalorganic chemical vapor deposition of ferroelectric thin films Materials Engineering Science 2008-06-06
Percha, Pamela Anne I, Crystallization and morphological studies of ICI's intermediate temperature semicrystalline (ITX) polymer ; and, II, The influence of deformation (shear strain) during bond formation on adhesive bond strength Materials Engineering Science 2007-08-03
Pickrell, Gary Robert High temperature alkali corrosion kinetics of low expansion ceramics Materials Engineering Science 2008-06-06
Ravishankar, S. A Creating long-range hydrophobic forces by coadsorption of ionic and neutral surfactants Materials Engineering Science 2008-06-06
Risch, Brian G. Crystallization behavior and structure property behavior of selected thermoplastic polymers Materials Engineering Science 2006-11-08
Sen, Sidhartha Effects of ion processing and substrate variables on electrical characteristics of GaAs Materials Engineering Science 2008-07-28
Senger, James S. Physical and mechanical behavior of amorphous poly(arylene ether)ketone and poly(arylene ether)ketone modified bismaleimides Materials Engineering Science 2007-07-13
Shephard, Nick E Measuring and predicting sealant adhesion Materials Engineering Science 2008-06-06
Smith, Alphonsa Studies of charge transfer in the N+L{u2082}P-N{u2082}P system. Materials Engineering Science 2010-07-08
Spinu, Ionel M. Durability of sheet molding compound/metal adhesive bonds Materials Engineering Science 2005-10-13
Srinivas, Srivatsan Crystallization and structure-property investigations of semicrystalline poly(arylene ether) based polymers Materials Engineering Science 2007-07-10
Vailhe, Christophe N. P. Deformation mechanisms in B2 aluminides :shear faults and dislocation core structures in FeAl, NiAl, CoAl and FeNiAl Materials Engineering Science 2008-06-06
Vaseashta, Ashok K Photonic studies of defects and amorphization in ion beam damaged GaAs surfaces Materials Engineering Science 2007-08-08
Verma, Ravi Kant Melting and crystallization studies in a partially excluding copolymer Materials Engineering Science 2005-10-24
Vick, Linda Wagnecz Solid-state processing of thermoplastic polymers Materials Engineering Science 2006-08-14
Vijay, Dilip P Reliability and processing of ferroelectric thin film capacitors with emphasis on fatigue and etching Materials Engineering Science 2008-06-06
Vrana, Mark A A chemical and mechanical evaluation of interfacial fracture in dicyandiamide cured epoxy/steel adhesive systems Materials Engineering Science 2008-06-06
Ward III, Allan Residual Stress Effects on Power Slump and Wafer Breakage in GaAs MESFETs Materials Engineering Science 1998-07-12
Weick, Brian L. Effects of fiber type on the tribological behavior of polyamide composites Materials Engineering Science 2006-10-19
Wood, Judy D. Determination of thermal strains in the neighborhood of a bimaterial interface Materials Engineering Science 2006-06-07
Wu, Chang-Hong X-ray diffraction study of aged copper beryllium alloys Materials Engineering Science 2008-10-02
Wuchina, Eric Joseph Thermochemical modeling and chemical vapor deposition of two-phase borides in the Hf-Si-B-Cl-H system Materials Engineering Science 2008-06-06
Xie, Zhao-Yang Atomistic simulation of dislocation core structures in B2 NiAl Materials Engineering Science 2005-10-24
Xu, Zhenghe A study of hydrophobic interaction in fine particle coagulation Materials Engineering Science 2005-10-19
Yang, Yaping. Development of SiC whisker/chopped SiC fiber reinforced (Caõ0õ.õ6,Mgõ0õ.õ4)Zrb4s(POb4s)b6s ceramic matrix composites Materials Engineering Science 2006-06-07
Yoo, In Kyeong Electrical crosstalk in multilayer ceramic substrates Materials Engineering Science 2005-10-19
Yoon, Tae-Ho Adhesion study of thermoplastic polymides with Ti-6Al-4V alloy and PEEK-graphite composites Materials Engineering Science 2008-07-28
York, Gregory A. Structure-property relationships of multiphase copolymers Materials Engineering Science 2007-07-10
Yu, Ta-Hua Processing and structure-property behavior of microporous polyethylene :from resin to final film Materials Engineering Science 2007-08-23
Zhang, Weimin In situ laser Raman studies of the mechanism of ethanol oxidation over supported molybdenum oxide Materials Engineering Science 2008-06-06
Zumbrum, Michael Allen Characterization of photocurable networks in real-time and post-exposure Materials Engineering Science 2007-08-03
Alfeeli, Bassam Ionizing Radiation Resistance of Random Hole Optical Fiber for Nuclear Instrumentation and Control Applications Materials Science and Engineering 2009-05-12
Asare, Ted Ankomahene Investigating Ferroelastic and Piezoelectric Vibration Damping Behavior in Nickel-Barium Titanate and Nickel-PZT Composites Materials Science and Engineering 2007-10-06
Asmatulu, Ramazan Advanced Chemical-Mechanical Dewatering of Fine Particles Materials Science and Engineering 2001-04-03
Bai, Feiming Structure-Property Relationships of Multifeorric Materials - A Nano Perspective Materials Science and Engineering 2006-06-16
Bai, Guofeng Low-Temperature Sintering of Nanoscale Silver Paste for Semiconductor Device Interconnection Materials Science and Engineering 2005-10-31
Belcastro, Elizabeth Lynn Life Cycle Analysis of a Ceramic Three-Way Catalytic Converter Materials Science and Engineering 2012-05-07
Berry, David Characterization of Laminated Magnetoelectric Vector Magnetometers to Assess Feasibility for Multi-Axis Gradiometer Configurations. Materials Science and Engineering 2010-11-26
Bonnell, Elizabeth Ann Temperature Dependent Behavior of Optical Loss from Hydrogen Species in Optical Fibers at High Temperature Materials Science and Engineering 2015-05-20
Bullions, Todd Aaron Manufacture of and Environmental Effects on Carbon Fiber-Reinforced PhenylEthynyl-Terminated Poly(EtherImide) Materials Science and Engineering 2000-09-13
Butler, Joseph Edmund In-situ Fiber Strength Distribution In NextelTM 610 Reinforced Aluminum Composites Materials Science and Engineering 2006-05-09
Butsch, Susan Laurel Mechanical and physical properties of particulate reinforced composites Materials Science and Engineering 2009-10-31
Calata, Jesus Noel Densification Behavior of Ceramic and Crystallizable Glass Materials Constrained on a Rigid Substrate Materials Science and Engineering 2005-05-11
Cao, Hu Phase transformations in highly electrostrictive and magnetostrictive crystals: structural heterogeneity and history dependent phase stability Materials Science and Engineering 2008-08-06
Carter, Robert Hansbrough Characterizing the Mechanical Properties of Composite Materials Using Tubular Samples Materials Science and Engineering 2001-07-30
Carter, Robert Hansbrough Transmitted light intensity as a nondestructive evaluation technique for glass/epoxy composite laminates Materials Science and Engineering 2009-11-24
Chang, Tsunou The notched coating adhesion specimen :a fracture test for coatings and accelerated screening test for adhesion Materials Science and Engineering 2008-11-18
Chang, Jhing-Fang Preparation and characterization of doped lead zirconate titanate Pb(Zr{u0078}Ti{u0333}1-x)O{u0333}3 films Materials Science and Engineering 2010-05-04
Chen, Zhuo Electrochemical Studies of Copper-Activation of Sphalerite and Pyrite Materials Science and Engineering 1999-04-22
Chen, Jhewn-Kuang Effects of alloying elements upon austenite decomposition in high strength low alloy steels Materials Science and Engineering 2009-10-10
Cheung, Yeuk Kit Hemocompatible polymer thin films fabricated by Electrostatic Self-Assembly (ESA) Materials Science and Engineering 2005-02-26
Choe, JoonWon Constrained sintering of gold circuit films on rigid substrates Materials Science and Engineering 2009-12-04
Clark, Richard L Altering the fiber-matrix interphase in semicrystalline polymer matrix composites Materials Science and Engineering 2009-12-04
Clarke, James R The sintering effection of time, temperature, and ZnO additions on (Ca{u2080}{u0333}.{u2086},Mg{u2080}{u0333}.{u2084})Zr{u2084}(PO{u2084}){u2086} (CMZP) ceramics Materials Science and Engineering 2008-11-18
Courtney, Scott B. A rapid, non-destructive test to detect camshaft lobe grinding burn Materials Science and Engineering 2008-09-04
Crowson, Douglas A. Stability of Nanoporous Metals Materials Science and Engineering 2006-06-24
Cunningham, David R. Determination of residual stresses in HSLA-100 steel weldments as a function of welding parameters using x-ray diffraction Materials Science and Engineering 2009-11-10
Davis, Kedzie The effect of cooling rate on toughness and crystallinity in poly(ether ketone ketone) (PEKK)/G30-500 composites Materials Science and Engineering 2008-09-18
Demaree, Robert John The effects of process parameters on the properties of resin transfer molded composites Materials Science and Engineering 2008-11-18
Desu, Chandra S. Chemically modified Ta2O5 thin films for dynamic random access memory (DRAM) applications Materials Science and Engineering 1998-07-17
DiBiccari, Anders Owen Sol-gel processing of RxY3-xAlyFe5-yO12 magneto-optical films Materials Science and Engineering 2002-12-27
Dicic, Zorana High Temperature Corrosion of Single Crystal Sapphire and Zirconia in Coal Gasification and Commercial Glass Environments Materials Science and Engineering 2004-05-27
Dickerson, Bryan Douglas Characterization of Ferroelectric Films by Spectroscopic Ellipsometry Materials Science and Engineering 1997-09-10
Dickerson, Bryan Douglas Organometallic Synthesis Kinetics of CdSe Quantum Dots Materials Science and Engineering 2005-04-26
Droesch, Kristen L. The Development of Gelatin Based Tissue Adhesives for Use in Soft Tissue Biomedical Applications Materials Science and Engineering 1999-12-13
Du, Weiwei Electrostatic Self-Assembly of Biocompatible Thin Films Materials Science and Engineering 2000-06-11
Duemling, Martin Modeling and characterization of nanoelectromechanical systems Materials Science and Engineering 2002-08-19
Durandurdu, Murat Molecular Statics Simulation in Aluminum Materials Science and Engineering 1999-06-11
Dursun, Aziz Nanoporosity Formation in Ag-Au Alloys Materials Science and Engineering 2003-10-26
Duthoit, Jeremy A micromechanics-based method for off-axis strength prediction of unidirectional laminae - Approach for a nonlinear rubber based lamina Materials Science and Engineering 1999-08-05
Dykema, Christopher Patrick Reaction Synthesis of HfB2 in a Variety of Metallic Environments Materials Science and Engineering 2012-03-19
Eaton, James Allen Effect of temperature and percent cold work on the mechanical properties of aluminum alloy 3104 Materials Science and Engineering 2010-03-30
Eichstadt, Amy Elizabeth Structure-Property Relationships and Adhesion in Polyimides of Varying Aliphatic Content Materials Science and Engineering 2002-07-24
Ellis, Frederick Paa Kwesi Fabrication of Random Hole Optical Fiber Preforms by Silica Sol-Gel Processing Materials Science and Engineering 2004-03-18
Elmkharram, Hesham Moh. A. Mechanically Processed Alumina Reinforced Ultra-high Molecular Weight Polyethylene (UHMWPE) Matrix Composites Materials Science and Engineering 2013-03-22
Elster, Jennifer L. Long Period Grating-Based pH Sensors for Corrosion Monitoring Materials Science and Engineering 1999-05-25
Escobar, Jose Alejandro Stress and fatigue analysis of svi-tested camshaft lobes Materials Science and Engineering 1998-07-13
Esterly, Daniel Mason Manufacturing of Poly(vinylidene fluoride) and Evaluation of its Mechanical Properties Materials Science and Engineering 2002-08-21
Faierson, Eric J. Influences of Reaction Parameters on the Product of a Geothermite Reaction: A Multi-Component Oxidation-Reduction Reaction Study Materials Science and Engineering 2009-05-07
Faierson, Eric J. Structure-Property Relationships of Tantalum Carbide Foams and Synthesis of an Interpenetrating Phase Composite Materials Science and Engineering 2011-08-16
Farmer, Robin Sandra A Study of Crystallization in Bisphenol-A Polycarbonate Materials Science and Engineering 2001-12-07
Farrar, Gabrielle Creation of Ovalbumin Based Scaffolds for Bone Tissue Regeneration Materials Science and Engineering 2009-05-06
Farrell, Michael P. Polymer blends formed by the solid state mechanical alloying process Materials Science and Engineering 2009-12-04
Fielder, Robert Stanley Computer Aided Design and Fabrication of Magnetic Composite Multilayer Inductors Materials Science and Engineering 2000-12-14
Fleming, Dara Lynn Evaluating bacterial cell immobilization matrices for use in a biosensor Materials Science and Engineering 2005-01-03
Floyd, Niklas Paul Energetics and Deformation Response of Random Grain Boundaries in FCC Nickel Materials Science and Engineering 2010-05-19
Focht, Eric M. Transformation induced plasticity in ceramics Materials Science and Engineering 2009-12-23
Folgar, Carlos Eduardo Structure Evolution of Silica Aerogel under a Microwave Field Materials Science and Engineering 2010-05-19
Folz, Diane C Variable Frequency Microwave Curing of Polyurethane Materials Science and Engineering 2011-08-15
Franklin, Jennifer In-situ Synthesis of Piezoelectric-Reinforced Metal Matrix Composites Materials Science and Engineering 2003-06-17
Gagliano, Jerone Matthew An Improved Method for the Fracture Cleavage Testing of Adhesively-Bonded Wood Materials Science and Engineering 2001-03-20
Gibbons, Luke J. Nanocomposite Dispersion: Quantifying the Structure-Function Relationship Materials Science and Engineering 2011-09-20
Giunta, Rachel K. Durability of Polyimide/Titanium Adhesive Bonds: An Interphase Investigation Materials Science and Engineering 1999-11-03
Glaesemann, Benjamin Paul Ovalbumin-Based Scaffolds Reinforced with Cellulose Nanocrystals for Bone Tissue Engineering Materials Science and Engineering 2011-07-06
Goff, Adam Carter Modeling and Synthesis of a Piezoelectric Ceramic-Reinforced Metal Matrix Composite Materials Science and Engineering 2003-05-21
Gordon, Matthew A Nacreous Self-Assembled Nanolaminate for Corrosion Resistance on 2024-Al Alloy Materials Science and Engineering 2001-06-13
Gouldey, David The Effect of Growth Method on GaN Films and Their Interfaces with CdTe and CdS Materials Science and Engineering 2010-12-15
Graham, David W Corrosion resistant chemical vapor deposited coatings for SiC and Si3N4 Materials Science and Engineering 2009-09-29
Gray, David Todd Optimization of the Process for Semiconductor Device Fabrication in the MicrON 636 Whittemore Cleanroom Facility Materials Science and Engineering 2003-08-15
Gray, David T Modeling and Characterization of Friction Stir Fabricated Coatings on Al6061 and Al5083 Substrates Materials Science and Engineering 2009-12-18
Grimsley, Brian William Characterization of the Vacuum Assisted Resin Transfer Molding Process for Fabrication of Aerospace Composites Materials Science and Engineering 2005-12-11
Gu, Weiqun Interfacial Adhesion Evaulation of Uniaxial fiber-Reinforced-Polymer Composites by Vibration Damping of Cantilever Beam Materials Science and Engineering 1998-07-13
Hailer, Benjamin Thomas Effect of Heat Treatment on Magnetic and Mechanical Properties of an Iron-Cobalt-Vanadium-Niobium Alloy. Materials Science and Engineering 2002-05-03
Hamandi, Rola Riad Effects of tooth quality, tooth structure, and cement mixing ratios on dental adhesion Materials Science and Engineering 2009-06-10
Han, Dae-Seob Theory of Tunneling-Injection Quantum Dot Lasers Materials Science and Engineering 2009-09-16
Haque, Ashim Shatil Processing and Characterization of Device Solder Interconnection and Module Attachment for Power Electronics Modules Materials Science and Engineering 2000-01-07
Harutyunyan, Satenik Magneto-Elastic Interactions in a Cracked Ferromagnetic Body Materials Science and Engineering 2006-12-13
Harutyunyan, Satenik Magnetic and Elastic Interactions at Cracks and Interfaces in Ferromagnetic Materials Materials Science and Engineering 2008-10-06
Hendricks, Warren Charles Metallorganic chemical vapor deposition of lead oxide and lead titanate Materials Science and Engineering 2009-03-12
Herrmann, Rebecca K. Tensile behavior of unidirectional and cross-ply ceramic matrix composites Materials Science and Engineering 2008-10-01
Herz, Erik Colloidal Semiconductor Nanocrystals: A Study of the Syntheses of and Capping Structures for CdSe Materials Science and Engineering 2003-07-30
Hiser, Matthew A Powder Processing and Characterization of W-3Ni-1Fe Tungsten Heavy Alloy Materials Science and Engineering 2011-05-06
Holt, Susan Marie Effect of Processing Parameters on Bond Strength and Effective Plasticity in Al2O3-TiB2 Composites Materials Science and Engineering 2011-09-21
Horne, Michael Robert Rayleigh Wave Acoustic Emission during Crack Propagation in Steel Materials Science and Engineering 2003-08-24
Howell, Robert H. Synthesis of fluorophlogopite using solid-state reaction techniques Materials Science and Engineering 2010-03-30
Hunt, Michael Patrick Pressureless Densification of Alumina - Titanium Diboride Ceramic Matrix Composites Materials Science and Engineering 2009-02-23
Hyde, Brian Effects of Carbon on Fracture Mechanisms in Nanocrystalline BCC Iron - Atomistic Simulations Materials Science and Engineering 2004-04-26
Jackson, Mitchell Lee Investigation of Adhesive and Electrical Performance of Waterborne Epoxies for Interlayer Dielectric Material Materials Science and Engineering 1999-11-24
Jeffers, Elizabeth Ann Reaction Synthesis of Titanium Aluminide / Titanium Diboride in-Situ Composites Materials Science and Engineering 2006-10-12
Jiang, Li Theoretical study of performance characteristics of semiconductor quantum dot lasers Materials Science and Engineering 2008-09-09
Jiang, Li Thermo-Mechanical Reliability of Sintered-Silver Joint versus Lead-Free Solder for Attaching Large-Area Devices Materials Science and Engineering 2010-12-23
Jin, Tongan Interactions of the Air Electrode with Electrolyte and Interconnect in Solid Oxide Cells Materials Science and Engineering 2011-08-24
Jullian, Christelle Francoise Investigation of polarization switching over broad time and field domains in various ferroelectrics Materials Science and Engineering 2003-12-17
Jullian, Christelle Francoise Self-Assembly of Matching Molecular Weight Linear and Star-Shaped Polyethylene glycol Molecules for Protein Adsorption Resistance Materials Science and Engineering 2007-11-14
Kang, Min Alkali/steam corrosion resistance of commercial SiC products coated with sol-gel deposited Mg-doped Al2TiO5 and CMZP Materials Science and Engineering 2009-04-08
Karmarkar, Makarand Anand Smart material composites for magnetic field and force sensors Materials Science and Engineering 2008-08-21
Kelly, Shawn Michael Characterization and Thermal Modeling of Laser Formed Ti-6Al-4V Materials Science and Engineering 2002-05-22
Kelly, Shawn Michael Thermal and Microstructure Modeling of Metal Deposition Processes with Application to Ti-6Al-4V Materials Science and Engineering 2004-11-24
Kessler, Christopher S Freeze Casting of Aqueous PAA-Stabilized Carbon Nanotube-Al2O3 Suspensions Materials Science and Engineering 2006-08-04
Khalfallah, Ibrahim Designing Microstructure through Reverse Peritectoid Phase Transformation in Ni3Mo Alloy Materials Science and Engineering 2016-12-14
Khan, Ashraf Reza Preparation and characterization of lead lanthanum titanate thin films by metalorganic decomposition Materials Science and Engineering 2009-04-18
Knipling, Keith Edward High-cycle fatigue / low-cycle fatigue interactions in Ti-6Al-4V Materials Science and Engineering 2003-02-25
Kominsky, Daniel Development of Random Hole Optical Fiber and Crucible Technique Optical Fibers Materials Science and Engineering 2005-09-12
Krause, Amanda Rochelle Characterization Study of Plasma Spray Attachment of Intrinsic Fabry-Perot Interferometric Sensors in Power Generation Applications Materials Science and Engineering 2012-06-15
Kuhr, Thomas A. Adhesion Strength of Cordierite Bulk Coatings on Molybdenum Substrates Materials Science and Engineering 1997-07-23
Kulp, Andrew Brooks Analysis of Strength Variation in Glass Due to Ion Exchange Materials Science and Engineering 2012-05-24
Kumar, Amit Morphology, Crystallization and Melting Behavior of Statistical Copolymers of Propylene with Ethylene, 1-Butene, 1-Hexene and 1-Octene Materials Science and Engineering 2001-06-14
Kwan, Kermit S. The Role of Penetrant Structure on the Transport and Mechanical Properties of a Thermoset Adhesive Materials Science and Engineering 1998-07-27
Kyriakides, Steven Alan Characterization of Shear Strengths and Microstructures for Solid Rocket Motor Insulation Materials Materials Science and Engineering 2007-12-05
Latapie, Antoine Nicolas Molecular Dynamics Investigation on the Fracture Behavior of Nanocrystalline Fe Materials Science and Engineering 2002-05-24
Lee, June Key Process-Induced Degradation during the Integration of Pb(Zr/x Ti/1-x)O3 Ferroelectric Capacitors Materials Science and Engineering 1999-09-20
Lei, Guangyin Synthesis of Nano-Silver Colloids and Their Anti-Microbial Effects Materials Science and Engineering 2008-04-25
Lei, Guangyin Thermomechanical Reliability of Low-Temperature Sintered Attachments on Direct Bonded Aluminum (DBA) Substrate for High-Temperature Electronics Packaging Materials Science and Engineering 2010-05-13
Li, Wei Kinetics and Mechanism of Ozone Decomposition and Oxidation of Ethanol on Manganese Oxide Catalysts Materials Science and Engineering 1998-05-28
Li, Wenle Study of Freeze-Cast Porous Silica Nanoparticle-Based Composites Materials Science and Engineering 2012-07-11
Lian, Michelle K. Study of Durability of Epoxy Bonded Joints in Aqueous Environments Materials Science and Engineering 1998-08-04
Liang, Yongxuan Fabrication and Characterization of Superconducting Core Fibers with Fused Silica Cladding Materials Science and Engineering 2014-02-11
Liao, Nam Characterization and interphase mechanical properties of epoxy/PVP blends Materials Science and Engineering 2008-11-07
Lindsay, Marianne Rose Development of Lithium Disilicate Microstructure Graded Glass-Ceramic Materials Science and Engineering 2012-05-25
Liu, Xingsheng Processing and Reliability Assessment of Solder Joint Interconnection for Power Chips Materials Science and Engineering 2001-04-08
Lobato, Emilio Marcus de Castro Determination of Surface Free Energies and Aspect Ratio of Talc Materials Science and Engineering 2004-11-18
Lok, Jonathan Y. Acid Leaching of SHS Produced MgO/TiB2 Materials Science and Engineering 2006-10-12
Longhenry, Joy Ciferri Characterization of the crystallinity and mechanical properties of CTFE & CTFE copolymeric films as a function of cooling rate and the implications on adhesion Materials Science and Engineering 2009-03-03
Lu, Yangsheng Corrosion resistance of NZP and aluminum titanate Materials Science and Engineering 2005-10-07
Lynch, Matthew Earl The Effect of Microwaves on Aqueous Corrosion of Glass Materials Science and Engineering 2006-07-26
Mahapatra, Manoj Kumar Study of Seal Glass for Solid Oxide Fuel/Electrolyzer Cells Materials Science and Engineering 2009-12-16
Mahieux, Celine Agnes A Systematic Stiffness-Temperature Model for Polymers and Applications to the Prediction of Composite Behavior Materials Science and Engineering 1999-03-22
Mahieux, Celine Agns Stress rupture of unidirectional polymer matrix composites in bending at elevated temperatures Materials Science and Engineering 2008-11-01
Mahmoud, Morsi Mohamed Crystallization of Lithium Disilicate Glass Using Variable Frequency Microwave Processing Materials Science and Engineering 2007-05-01
Maisano, Adam J. Cryomilling of Aluminum-based and Magnesium-based Metal Powders Materials Science and Engineering 2006-01-26
Majumdar, Nandita N. Development of Low Expansion Glaze Coatings on As Fired Si3N4 to Enhance Room Temperature Flexural Strength Materials Science and Engineering 1998-06-19
Manjooran, Navin Jose Van Der Waals Interactions Based Rheological Analysis for Electrosterically Stabilized Nano-Sized Alpha Silicon carbide-Lactobacillus Gg Dispersions Materials Science and Engineering 2007-01-31
Marte, Judson Sloan High temperature flow behavior of titanium aluminide intermetallic matrix composites Materials Science and Engineering 2008-11-01
Martin, Julie Patricia An Investigation of the Microstructure and Properties of a Cryogenically Mechanically Alloyed Polycarbonate- Poly(ether ether ketone) System Materials Science and Engineering 2001-11-29
Martin, Raphael Synthesis and processing of intermetallic matrix composites as reinforcements in metallic matrices Materials Science and Engineering 2009-06-11
Matson, Edward Mark II Dual-Mode Vehicle Design and Analysis Materials Science and Engineering 1998-07-28
May, Russell G. Miniature Fiber Optic Viscoelasticity Sensor for Composite Cure Monitoring Materials Science and Engineering 1998-06-10
May, Raymond Jeffrey Effect of photoageing and plasticizer content on the mechanical and adhesive properties of polyvinylbutyral Materials Science and Engineering 2008-11-01
May, Nathanael Henderson A Morphological Study of PFCB-Ionomer/ PVdF Copolymer Blend Membranes For Fuel Cell Application Materials Science and Engineering 2011-08-22
McAllister, Walter Elliot A Critical Review of Multi-Phase Materials and Optimization Strategies for Additive Printing Technologies Materials Science and Engineering 2013-05-23
McCann, Martha Mary Nanoindentation of Gold Single Crystals Materials Science and Engineering 2004-04-23
McPeak, Jennifer Lynne Solvent-Induced Crystallization of Poly(ether ether ketone) Materials Science and Engineering 1999-12-03
Medding, Jonathan A. Nondestructive Evaluation of Zirconium Phosphate Bonded Silicon Nitride Radomes Materials Science and Engineering 1998-07-18
Mendiratta, Neeraj K. Kinetic Studies of Sulfide Mineral Oxidation and Xanthate Adsorption Materials Science and Engineering 2000-05-05
Miceli, Marybeth Assessment of Infrared Thermography for NDE of FRP Bridge Decks Materials Science and Engineering 2000-12-20
Miraj, Nikhil Low modulus, oxidation-resistant interface coatings for SiC/SiC composites Materials Science and Engineering 2008-11-18
Mohanty, Somadatta Tensile Stress and Thermal Growth Effects on Grain Boundary Motion in Nanocrystalline Nickel Materials Science and Engineering 2005-12-23
Monk, Joshua D Study of Nanowires Using Molecular Dynamics Simulations Materials Science and Engineering 2007-11-16
Monsegue, Niven SOLID STATE SYNTHESIS OF BULK AMORPHOUS Ni – 50AT% Ti ALLOY Materials Science and Engineering 2008-02-04
Monsegue, Niven Characterizing the Effects of Mechanical Alloying on Solid State Amorphization of Nanoscaled Multilayered Ni-Ti Materials Science and Engineering 2010-07-23
Montazami, Reza Fabrication and Characterization of Layer by Layer Assembled Single and Dual-Electrochrome Electrochromic Devices Materials Science and Engineering 2009-12-18
Montazami, Reza Smart Polymer Electromechanical Actuators for Soft Microrobotic Applications Materials Science and Engineering 2011-06-19
Mueller, Jennifer Elizabeth Determining the Role of Porosity on the Thermal Properties of Graphite Foam Materials Science and Engineering 2008-07-22
Munusamy, Prabhakaran Design, Synthesis and Characterization of Porous Silica Nanoparticles and Application in Intracellular Drug Delivery Materials Science and Engineering 2010-07-13
Mutasa, Batsirai M. Defect Structures in Ordered Intermetallics; Grain Boundaries and Surfaces in FeAl, NiAl, CoAl and TiAl. Materials Science and Engineering 1998-07-19
Myers, Elizabeth C Biomimetic composite structure to simulate tendon performance Materials Science and Engineering 2009-05-09
Myslinski, Paul Joseph Analysis of Cyanate Ester Resins and Graphite Fabric for Use in Resin Film Infusion Processing Materials Science and Engineering 1997-12-16
Neyman, Elizabeth Improvement in Adhesion for the Epoxy-SiC System via Plasma and Silane Surface Modification Techniques Materials Science and Engineering 2003-08-12
Neyman, Patrick J. Nonlinear Optical Properties and Structural Characteristics of Ionically Self-Assembled Nanoscale Polymer Films Influenced by Ionic Concentration and Incorporation of Monomer Chromophores Materials Science and Engineering 2002-05-23
Nguyen, Thierry Huu Chi CMZP and Mg-doped Al2TiO5 Thin film Coatings for High Temperature Corrosion Protection of Si3N4 Heat Exchangers Materials Science and Engineering 1998-04-21
Nitowski, Gary Alan Topographic and Surface Chemical Aspects of the Adhesion of Structural Epoxy Resins to Phosphorus Oxo Acid Treated Aluminum Adherends Materials Science and Engineering 1998-12-05
Nyman, May Synthesis and characterization of precursors for chemical vapor deposition of metal oxide thin films Materials Science and Engineering 2009-07-11
Okerberg, Brian Morphological Studies of Crystallization in Thin Films of PEO/PMMA Blends Materials Science and Engineering 2005-10-07
Osborne, Daniel Josiah A Nanoengineering Approach to Oxide Thermoelectrics For Energy Harvesting Applications Materials Science and Engineering 2010-12-14
Panova, Julia B. Mechanisms of Deformation and Fracture in TiAl: An Atomistic Simulation Study Materials Science and Engineering 1998-07-20
Parvatareddy, Hari Durability of Polyimide Adhesives and Their Bonded Joints for High Temperature Applications Materials Science and Engineering 1997-11-20
Payyapilly, Jairaj Joseph Formation And Growth Mechanisms of a High Temperature Interfacial Layer Between Al and TiO2 Materials Science and Engineering 2008-11-24
Pazhianur, Rajesh R Hydrophobic Forces in Flotation Materials Science and Engineering 1999-06-17
Pete, Thobeka Portia Deformation processed IMC-reinforced metal matrix composites Materials Science and Engineering 2009-07-11
Pfeiffenberger, Neal Thomas Single Crystal Sapphire Photonic Crystal Fibers Materials Science and Engineering 2012-08-30
Poquette, Ben David Damping Behavior in Ferroelectric Reinforced Metal Matrix Composites Materials Science and Engineering 2005-05-11
Poquette, Ben David Understanding Ferroelastic Domain Reorientation as a Damping Mechanism in Ferroelectric Reinforced Metal Matrix Composites Materials Science and Engineering 2007-10-02
Pugh, Dylan Vicente Nanoporous Platinum Materials Science and Engineering 2003-04-25
Rao, Weifeng Computer Modeling and Simulation of Morphotropic Phase Boundary Ferroelectrics Materials Science and Engineering 2009-08-02
Rodriguez Rivera, Katia Argelia Electrospun Nanocellulose: A New Biomaterial Materials Science and Engineering 2011-10-24
Rojas, Andrea Diane Particle Manipulation Using Electric Field Gradients in Microdevices Materials Science and Engineering 2012-02-14
Rosidian, Aprillya Nanocomposite of ZrO2/Polymer Thin-Film Coatings by The Ionically Self-Assembled Monolayer Technique Materials Science and Engineering 1998-03-16
Ross , T. Structure and precipitate morphology relationships in a 68Cr-32Ni binary system Materials Science and Engineering 2010-04-21
Ruette, Benjamin Thibault Induced Phase Transition in Magnetoelectric BiFeO3 Crystals, Thin-layers and Ceramics Materials Science and Engineering 2003-05-12
Russ, William M Structure, property, and processing relationships of CMZP - [(Ca0.6, Mg0.4)Zr4(PO4)6] Materials Science and Engineering 2009-01-17
Ryu, Sang-Ouk Synthesis and Characterization of Ferroelectric (1-x)SrBi2Ta2O9-xBi3TaTiO9 thin films for Non-volatile memory Applications Materials Science and Engineering 1999-05-06
Sankir, Nurdan Demirci FLEXIBLE ELECTRONICS: MATERIALS and DEVICE FABRICATION Materials Science and Engineering 2005-12-21
Sayre, Jay Randall Vacuum-Assisted Resin Transfer Molding (VARTM) Model Development, Verification, and Process Analysis Materials Science and Engineering 2000-04-20
Schultz, Jeffrey Patrick Modeling Heat Transfer and Densification during Laser Sintering of Viscoelastic Polymers Materials Science and Engineering 2004-01-09
Scott, Brian Lee Fabrication and Characterization of a Porous Clad Optical Fiber Gas Sensor Materials Science and Engineering 2009-01-11
Scott, Brian Lee Semi-conductor Core Optical Fibers and Fabrication Dependence of the Grain Structure Materials Science and Engineering 2011-09-14
Shea, Lauren Elizabeth ZnGa2 O4 and ZnGa2 O4: Mn2+ for potential use in vacuum fluorescent displays Materials Science and Engineering 2009-01-10
Sheets, Kevin Mechanical and Cellular Response to Biomineralization of Ovalbumin Scaffolds for Bone Tissue Engineering Materials Science and Engineering 2010-05-13
Si, Jie Metalorganic chemical vapor deposition of metal oxides Materials Science and Engineering 2008-12-30
Simkovic, Viktor Novel Low Dielectric Constant Thin Film Materials by Chemical Vapor Deposition Materials Science and Engineering 1999-11-07
Smith, Samantha Gail Novel Preparation of Porous Alumina using Ice Particles as Pore-Forming Agents Materials Science and Engineering 2011-07-25
Song, Yoon-Jong Ferroelectric Thin Films for High Density Non-volatile Memories Materials Science and Engineering 1998-08-13
Soule de Bas, Benjamin J Simulation of Bulk and Grain Boundary Diffusion in B2 NiAl Materials Science and Engineering 2001-05-31
South, Joseph Thomas Mechanical Properties and Durability of Natural Rubber Compounds and Composites Materials Science and Engineering 2002-02-25
Stawovy, Michael Thomas Processing of Aluminum Alloys Containing Displacement Reaction Products Materials Science and Engineering 2000-04-25
Stawovy, Michael T Processing and properties of FeW amorphous particle strengthened metal matrix composites Materials Science and Engineering 2009-06-10
Steward, Scott D The Effect of Salt Splash on Nylon 6,6 Materials Science and Engineering 1999-11-08
Stinson-Bagby, Kelly Lucile Microstructural Evolution in Thermally Cycled Large-Area Lead and Lead-Free Solder Joints Materials Science and Engineering 2002-08-16
Story, Christopher B. Shape Memory Alloy / Glass Composite Seal for Solid Oxide Fuel Cells Materials Science and Engineering 2007-05-18
Subrahmanyan, Sumitra An Investigation of Pore Collapse in Asymmetric Polysulfone Membranes Materials Science and Engineering 2003-09-08
Subramanian, Vivek Effects of long-chain surfactants, short-chain alcohols and hydrolyzable cations on the Hydrophobic and Hydration Forces Materials Science and Engineering 1998-12-17
Suggs, Allison Elizabeth Kr-F laser surface treatment of poly(methyl methacrylate), glycol-modified poly(ethylene terephthalate), and polytetrafluoroethylene for enhanced adhesion of Escherichia Coli K-12 Materials Science and Engineering 2002-09-25
Taminger, Karen M. B. Analysis of Creep Behavior and Parametric Models for 2124 Al and 2124+SiC Composite Materials Science and Engineering 1999-03-02
Tao, Wei Direct liquid injection metalorganic chemical vapor deposition of ferroelectric PZT films Materials Science and Engineering 2009-02-13
Ternes, J. Kevin Visualization and simulation of defect structures in the B2 phase of NiAl Materials Science and Engineering 2009-07-21
Teter, David Michael Computational Alchemy: The Rational Design of New Superhard Materials Materials Science and Engineering 1998-06-29
Thridandapani, Raghunath Rao The Effect of Microwave Energy on Sintering Materials Science and Engineering 2011-04-14
Tian, Zhipeng Nanopore/Nanotube Pattern Formation through Focused Ion Beam Guided Anodization Materials Science and Engineering 2010-12-14
Tirumala, Sridhar Integration of Ferroelectric Materials into High Density Non-Volatile Random Access Memories Materials Science and Engineering 2000-08-26
Trenor, Scott Russell An Examination of Transdermal Drug Delivery Using a Model Polyisobutylene Pressure Sensitive Adhesive Materials Science and Engineering 2001-09-25
Uan-Zo-li, Julie Tammy The Effects of Structure, Humidity and Aging on the Mechanical Properties of Polymeric Ionomers for Fuel Cell Applications Materials Science and Engineering 2001-12-18
Uan-Zo-li, Julie Tammy Morphology, Crystallization and Melting Behavior of Propylene-Ethylene Statistical Copolymers Materials Science and Engineering 2005-09-30
Vailhe, Christophe N. P. Planar fault energies and dislocation core spreadings in B2 NiAl Materials Science and Engineering 2008-12-17
Valentino, Karen Rose Durability testing of ceramic candle filters in pressurized-fluidized bed combustion environments Materials Science and Engineering 2009-04-25
Vaubert, Virginie M Durability and aging of dental fissure sealants Materials Science and Engineering 2008-08-25
Vedula, Ramakrishna Materials for High Temperature Thin Film thermocouple Applications Materials Science and Engineering 1998-04-07
Venzant, Kenneth L Analysis of residual stresses in laser trimmed alumina microelectronic substrates Materials Science and Engineering 2009-07-10
Verghese, Kandathil Eapen Durability of Polymer Matrix Composites for Infrastructure: The Role of the Interphase Materials Science and Engineering 1999-08-27
Verghese, Kandathil Eapen Effects of fiber architecture and through-the-thickness stitching on permeability and compaction of textile preforms Materials Science and Engineering 2008-08-29
Verma, Ravi Kant A study of the damage accumulation process in poly(aryl ether ketone ketone) and it's [sic] AS4 carbon fiber reinforced composites Materials Science and Engineering 2009-06-11
Vilette, Anne L Ionic mobility and superplasticity in ceramics Materials Science and Engineering 2009-07-21
Waller, Gordon Henry Template Directed Growth of Nb doped SrTiO3 using Pulsed Laser Deposition Materials Science and Engineering 2011-05-13
Walton, Kimberly S. Composition modification of zinc titanate (Znb2sTiOb4s) based sorbents for hot coal gas desulfurization Materials Science and Engineering 2005-10-07
Wang, Naigang Multiferroic Bismuth Ferrite-Lead Titanate and Iron-Gallium Crystalline Solutions: Structure-Property Investigations Materials Science and Engineering 2005-07-01
Wang, Jialin AFM surface force measurements between hydrophobized gold surfaces Materials Science and Engineering 2008-09-19
Wang, Ruijia Effect of Non-Ionic Surfactants and Nano-Particles on the Stability of Foams Materials Science and Engineering 2010-04-16
Ward, Allan RS/hyper :a hypertext solution for reliable residual stress determination using x-ray diffraction Materials Science and Engineering 2009-03-12
Wensley, Charles Alexander Processing and Properties of Amorphous NiW Reinforced Crystalline Ni Matrix Composites Materials Science and Engineering 2006-01-03
West, Douglas Design of a Fiber Optic Sensor Array for in Vitro Monitoring of Cellular Processes Materials Science and Engineering 1998-02-26
Willemann, Michael Howard Polymer-Supported Bridges for Multi-Finger AlGaN/GaN Heterojunction Field Effect Transistors (HFETs) Materials Science and Engineering 2007-08-27
Wooddell, Michael Gary Increased Functionality Porous Optical Fiber Structures Materials Science and Engineering 2007-10-07
Wu, Chun-Hsien Microstructure of Flash processed Steel Characterized by Electron Backscatter Diffraction Materials Science and Engineering 2009-12-21
Xing, Jimmy Electrical properites of doped and undoped PZT thin films prepared by a sol-gel method Materials Science and Engineering 2009-07-29
Xing, Zengping Magnetoelectric Device and the Measurement Unit Materials Science and Engineering 2009-04-27
Yan, Li Two phase magnetoelectric epitaxial composite thin films Materials Science and Engineering 2009-12-17
Yang, Shaokai Corrosion resistant CMZP and Mg-Al2TiO5 coatings for SiC ceramics Materials Science and Engineering 2008-08-22
Yang, Yaodong Barium Titanate-Based Magnetoelectric Nanocomposites Materials Science and Engineering 2011-06-21
Yao, Jianjun Structural Investigations of Highly Strictive Materials Materials Science and Engineering 2012-04-27
Yue , Naili Planar Packaging and Electrical Characterization of High Temperature SiC Power Electronic Devices Materials Science and Engineering 2008-12-18
Zeagler, Andrew Structure and Processing Relations in Ni-W Amorphous Particle Strengthened Ni Matrix Composites Materials Science and Engineering 2008-12-12
Zeagler, Andrew On a Bimodal Distribution of Grain Size in Mechanically Alloyed Bulk Tungsten Heavy Alloys Materials Science and Engineering 2011-06-24
Zhai, Junyi Magnetoelectric laminated composites and devices Materials Science and Engineering 2009-02-25
Zhang, Fajian Electro-optic Properties of Semiconductor Nano-crystals And Electro-optic Polymers And Their Applications Materials Science and Engineering 2002-10-17
Zhao, Xin Electropolishing of Niobium in Sulfuric Acid-Methanol Electrolytes: Development of Hydrofluoric Acid-Free Electrolytes Materials Science and Engineering 2009-08-03
Zheng, Hanguang Processing and Properties of Die-attachment on Copper Surface by Low-temperature Sintering of Nanosilver Paste Materials Science and Engineering 2012-05-14
Zhou, Hongyi Structure-Property Relationships: Model Studies On melt Extruded Uniaxially Oriented High Density polyethylene Films Having Well Defined Morphologies Materials Science and Engineering 1998-07-11
Zhu, Xiaojing Processability of Nickel-Boron Nanolayer Coated Boron Carbide Materials Science and Engineering 2008-08-12
Zou, Shubing Deposition and characterization of HfO{u2082} thin films Materials Science and Engineering 2009-07-11
Forcey, Stefan Andrew Loop Spaces and Iterated Higher Dimensional Enrichment Mathematical Physics 2004-04-23
Grabowski, Marek P. Self-duality for SU([infinity]) gauge theories and extended objects Mathematical Physics 2005-10-13
Kargol, Armin The Born-Oppenheimer approximation in scattering theory Mathematical Physics 2006-03-02
Keister, Adrian Clark On the Eigenvalues of the Manakov System Mathematical Physics 2007-06-30
Rondoni, Lamberto A stochastic treatment of reaction and diffusion Mathematical Physics 2008-07-28
Sandro, Manservisi Optimal Boundary and Distributed Controls for the Velocity Tracking Problem for Navier-Stokes Flows Mathematical Physics 1998-07-17
Stoyanov, Ognyan S Poisson-lie structures on infinite-dimensional jet groups and their quantization Mathematical Physics 2008-06-06
Yao, Aixiang. Kinetic theory and global existence in Lp1s for a dense square-well fluid Mathematical Physics 2006-10-04
Ackermann, Robert James Constructing Bitwisted Face Pairing 3-Manifolds Mathematics 2008-05-12
Ahuja, Kapil Recycling Bi-Lanczos Algorithms: BiCG, CGS, and BiCGSTAB Mathematics 2009-08-25
Ahuja, Kapil Recycling Krylov Subspaces and Preconditioners Mathematics 2011-11-11
Albanus, Julie C. An Analysis of Stability Margins for Continuous Systems Mathematics 1999-06-10
Amaya, Austin J. Beurling-Lax Representations of Shift-Invariant Spaces, Zero-Pole Data Interpolation, and Dichotomous Transfer Function Realizations: Half-Plane/Continuous-Time Versions Mathematics 2012-05-10
Anguil, Gene Henry Stability theory of differential equations Mathematics 2012-11-09
Anic, Branimir An interpolation-based approach to the weighted H2 model reduction problem Mathematics 2008-08-26
Appel, Justin Ronald Sensitivity Calculations For Conservation Laws With Application To Discontinuous Fluid Flows Mathematics 1998-07-11
Arat, Seda A Mathematical Model of a Denitrification Metabolic Network in Pseudomonas aeruginosa Mathematics 2012-12-14
Arnold, Rachel Florence Complex Analysis on Planar Cell Complexes Mathematics 2008-05-05
Arnold, Rachel Florence The Discrete Hodge Star Operator and Poincaré Duality Mathematics 2012-05-01
Atwell, Jeanne A. Proper Orthogonal Decomposition for Reduced Order Control of Partial Differential Equations Mathematics 2000-04-19
Baber, Courtney Leigh An Introduction to List Colorings of Graphs Mathematics 2009-06-08
Baccouch, Mahboub Superconvergence and A posteriori Error Estimation for the Discontinuous Galerkin Method Applied to Hyperbolic Problems on Triangular Meshes Mathematics 2008-02-29
Bail, Thomas R. A Disturbance-Rejection Problem for a 2-D Airfoil Exhibiting Flutter Mathematics 1998-07-11
Bardzell, Michael Resolutions and cohomology of finite dimensional algebras Mathematics 2006-10-04
Battermann, Astrid Preconditioning of Karush--Kuhn--Tucker Systems arising in Optimal Control Problems Mathematics 1998-07-11
Beane, Maria Elizabeth An Introduction to S(5,8,24) Mathematics 2011-05-12
Bellino, Kathleen Ann Computational Algorithms for Face Alignment and Recognition Mathematics 2002-05-16
Ben Romdhane, Mohamed Higher-Degree Immersed Finite Elements for Second-Order Elliptic Interface Problems Mathematics 2011-08-25
Beverly, Lesa Lynn The Creation of Algorithms Designed for Analyzing Periodic Surfaces of Crystals and Mineralogically Important Sites in Molecular Models of Crystals: Understanding the Electron Density Function Through Visual Examinations of the Curvature and Shape of the Equi-Value Laplacian Surfaces Mathematics 2000-07-24
Bobtcheva, Ivelina Numerical generation of semisimple tortile categories coming from quantum groups Mathematics 2008-06-06
Bochev, Pavel B. Least squares finite element methods for the Stokes and Navier-Stokes equations Mathematics 2008-06-06
Bonawitz, Elizabeth Ann A duality approach to spline approximation Mathematics 2006-03-02
Bondarenko, Oleksandr Optimal Control for an Impedance Boundary Value Problem. Mathematics 2010-12-14
Boquet, Grant Michael Multidimensional Behavioral Complexes Mathematics 2008-03-23
Boquet, Grant Michael Geometric Properties of Over-Determined Systems of Linear Partial Difference Equations Mathematics 2010-03-03
Borggaard, Jeffrey The sensitivity equation method for optimal design Mathematics 2006-06-07
Borisuk, Mark T. Bifurcation Analysis of a Model of The frog Egg Cell Cycle Mathematics 1998-07-12
Botelho, Fabio Silva Variational Convex Analysis Mathematics 2009-07-21
Bowman, Adam Shoresworth The Born-Oppenheimer Approximation for Triatomic Molecules with Large Angular Momentum in Two Dimensions Mathematics 2010-12-17
Boyce, Steven James The Distance to Uncontrollability via Linear Matrix Inequalities Mathematics 2010-12-14
Boyd, David Watts Transcendence degree in power series rings Mathematics 2010-05-13
Briggs, Matthew Edward An Introduction to the General Number Field Sieve Mathematics 1998-04-17
Brunnhofer, Harald Michael Forced Capillary-Gravity Waves in a 2D Rectangular Basin Mathematics 2005-04-25
Brunson, Jason Cornelius On Projective Planes & Rational Identities Mathematics 2005-05-10
Burkhardt, John Sensitivity analysis and computational shape optimization for incompressible flows Mathematics 2008-06-06
Burrell, Tinal R An alternating direction search algorithm for low dimensional optimization :an application to power flow Mathematics 2009-12-16
Burrowbridge, Sarah Elizabeth Optimal Allocation of Satellite Network Resources Mathematics 1999-12-21
Buterakos, Lewis Allen The Exit Time Distribution for Small Random Perturbations of Dynamical Systems with a Repulsive Type Stationary Point Mathematics 2003-08-18
Calzone, Laurence Mathematical Modeling of the Budding Yeast Cell Cycle Mathematics 2000-04-28
Camp, Katie A. E. The Search for a Reduced Order Controller: Comparison of Balanced Reduction Techniques Mathematics 2001-05-08
Camp, Brian David A Class of Immersed Finite Element Spaces and Their Application to Forward and Inverse Interface Problems Mathematics 2003-12-04
Camphouse, Russell C. Approximations and Object-Oriented Implementation for a Parabolic Partial Differential Equation Mathematics 1999-02-01
Camphouse, R. Chris Modeling and Numerical Approximations of Optical Activity in the Chemical Oxygen-Iodine Laser Mathematics 2001-08-13
Cao, Yanzhao Analysis and numerical approximations of exact controllability problems for systems governed by parabolic differential equations Mathematics 2006-05-11
Carpenter, Lon E Cascade analysis and synthesis of transfer functions of infinite dimensional linear systems Mathematics 2008-07-28
Carter, William Paul Non-unique Product Groups on Two Generators Mathematics 2007-05-03
Cerezo, Graciela M. Solution Representation and Indentification for Singular neutral Functional Differential Equations Mathematics 1998-07-12
Cerezo, Graciela M Numerical approximation and identification problems for singular neutral equations Mathematics 2009-09-05
Chalmeta, A. Pablo On the Units and the Structure of the 3-Sylow Subgroups of the Ideal Class Groups of Pure Bicubic Fields and their Normal Closures Mathematics 2006-10-04
Chasen, Lee A. The cohomology rings of classical Brauer tree algebras Mathematics 2006-06-07
Chen, Jun Discrete dynamical systems in solving H-equations Mathematics 2006-05-11
Cheng, Jiuyi Two problems in function theory of one complex variable : local properties of solutions of second-order differential equations and number of deficient functions of some entire functions Mathematics 2006-06-07
Chiang, Shihchung Numerical solutions for a class of singular integrodifferential equations Mathematics 2008-06-06
Childers, Adam Fletcher Parameter Identification and the Design of Experiments for Continuous Non-Linear Dynamical Systems Mathematics 2009-07-09
Chinyoka, Tirivanhu Numerical Simulation Of Stratified Flows And Droplet Deformation In 2D Shear Flow Of Newtonian And Viscoelastic Fluids Mathematics 2004-11-29
Chudoung, Jerawan Robust Control for Hybrid, Nonlinear Systems Mathematics 2000-04-19
Chung, Myungsuk Lie derivations on rings of differential operators Mathematics 2006-03-02
Cline, Danny O. On the Computation of Invariants in non-Normal, non-Pure Cubic Fields and in Their Normal Closures Mathematics 2004-11-21
Colon-Reyes, Omar Monomial Dynamical Systems over Finite Fields Mathematics 2005-04-28
Cone, Randall Edward Finite Generation of Ext-Algebras for Monomial Algebras Mathematics 2010-12-01
Conrad, Katarina Terzic Analysis of the Buckling States of an Infinite Plate Conducting Current Mathematics 2011-09-20
Conrad, Emery David Mathematical Models of Biochemical Oscillations Mathematics 1999-05-14
Conrad, Emery David Bifurcation Analysis and Qualitative Optimization of Models in Molecular Cell Biology with Applications to the Circadian Clock Mathematics 2006-04-27
Culbertson, George Edward Halphen's theorem and related results. Mathematics 2012-09-08
Culbertson, George Edward Some mathematical societies and journals Mathematics 2012-09-08
Deang, Jennifer Marie A Study of Inhomogeneities and Anisotrophies In Superconductors via Ginzburg-Landau Type models Mathematics 1998-07-13
Deng, Shengfu A Spatial Dynamic Approach to Three-Dimensional Gravity-Capillary Water Waves Mathematics 2008-07-10
Dickson, James Odziemiec An Introduction to Ramsey Theory on Graphs Mathematics 2011-05-16
Dimitrova, Elena Stanimirova Polynomial Models for Systems Biology: Data Discretization and Term Order Effect on Dynamics Mathematics 2006-08-02
Dravid, Amit A model of the checkpoint response of the cell cycle of frog-egg extracts in the presence of unreplicated DNA. Mathematics 2004-12-16
Drumright-Clarke, Mary Ann Numerical simulations that characterize the effects of surfactant on droplets in shear flow Mathematics 2002-04-16
Dumitra?cu, Constantin Dorin The odd chern character and obstruction theory Mathematics 2009-05-09
Eklund, Anthony D. The fine topology and other topologies on C(X,Y). Mathematics 2012-06-09
Ellingsen, Harold W. Growth of algebras, words, and graphs Mathematics 2005-10-24
Ellis, Robert B. A Kruskal-Katona theorem for cubical complexes Mathematics 2005-10-07
Evans, Katie Allison Reduced Order Controllers for Distributed Parameter Systems Mathematics 2003-12-01
Fang, Quanlei Multivariable Interpolation Problems Mathematics 2008-07-16
Farlow, Kasie Geralyn Max-Plus Algebra Mathematics 2009-05-04
Fast, Stephen Hardin Examples and theorems for generalized paracompact topological spaces Mathematics 2006-02-01
Ferry, John Rational and harmonic approximation on F.P.A. sets Mathematics 2005-10-13
Flagg, Garret Michael An Interpolation-Based Approach to Optimal H∞ Model Reduction Mathematics 2009-05-22
Flagg, Garret Michael Interpolation Methods for the Model Reduction of Bilinear Systems Mathematics 2012-05-03
Fulton, Melanie B. The Quantum Automorphism Group and Undirected Trees Mathematics 2006-07-26
Fulton, Brian I. Analysis and Approximation of Viscoelastic and Thermoelastic Joint-Beam Systems Mathematics 2006-07-26
Gaertner, Nathaniel Allen Special Cases of Density Theorems in Algebraic Number Theory Mathematics 2006-05-23
Gajdzinski, Cezary L2-Indices for Perturbed Dirac Operators on Odd Dimensional Open Complete Manifolds Mathematics 2005-10-24
Galinaitis, William S. Two Methods for Modeling Scalar Hysteresis and their use in Controlling Actuators with Hysteresis Mathematics 1999-12-03
Garcia-Puente, Luis David Algebraic Geometry of Bayesian Networks Mathematics 2004-04-16
Garren, Kenneth Ross Unitary equivalence of spectral measures on a Baer -semigroup. Mathematics 2010-06-02
Ge, Yuzhen Studies of one-dimensional unimodal maps in the chaotic regime Mathematics 2005-10-14
Gillespie, Jason Michael A Combinatorial Proof of the Positivity of the Lusztig q-Analogue of Weight Multiplicity for Rank 2 Lie Algebras Mathematics 2003-12-04
Gokhale, Dhananjay R. Resolutions mod I, Golod pairs Mathematics 2005-09-20
Grinshpon, Mark S. Universal Localization and Group Cohomology Mathematics 2006-08-14
Guerra Huaman, Moises Daniel Hardy-space Function Theory on Finitely Connected Planar Domains Mathematics 2008-04-22
Guerra Huaman, Moises Daniel Schur-class of finitely connected planar domains: the test-function approach Mathematics 2011-04-26
GUO, RUCHI A Linear Immersed Finite Element Space Defined by Actual Interface Curve on Triangular Meshes Mathematics 2017-04-03
Hagen, Thomas Ch. Elongational Flows in Polymer Processing Mathematics 1998-11-03
Hair, Steven New Methods for Finding Non-Left-Orderable and Unique Product Groups Mathematics 2003-12-08
Hammer, Patricia W. Parameter identification in parabolic partial differential equations using quasilinearization Mathematics 2006-02-01
Hartman, Gregory Neil Graphs and Noncommutative Koszul Algebras Mathematics 2002-04-23
He, Xiaoming Bilinear Immersed Finite Elements For Interface Problems Mathematics 2009-05-20
Herdman, Darwin T. Approximations for Singular Integral Equations Mathematics 1999-06-11
Herman, Mark Steven Born-Oppenheimer Corrections Near a Renner-Teller Crossing Mathematics 2008-07-03
Hinkelmann, Franziska Babette Algebraic theory for discrete models in systems biology Mathematics 2011-08-03
Hofmann, Ariane Leoni A Stochastic Framework to Model Extrinsic Noise in Gene Regulatory Networks Mathematics 2012-08-13
Hoggard, John W. Accuracy of Computer Generated Approximations to Julia Sets Mathematics 2000-08-14
Hou, Peter S. Nodal Reordering Strategies to Improve Preconditioning for Finite Element Systems Mathematics 2005-04-29
Hu, Weiwei Approximation and Control of the Boussinesq Equations with Application to Control of Energy Efficient Building Systems Mathematics 2012-06-19
Huang, Jiann-Shiuh One-to-one correspondance between maximal sets of antisymmetry and maximal projections of antisymmetry Mathematics 2005-10-13
Huang, Wei Compensator design for a system of two connected beams Mathematics 2005-10-24
Huang, Guowei Asymptotic properties of solutions of a KdV-Burgers equation with localized dissipation Mathematics 2005-10-24
Hughes, Sharon Marie Born-Oppenheimer Expansion for Diatomic Molecules with Large Angular Momentum Mathematics 2007-11-01
Hulsing, Kevin P Methods of Computing Functional Gains for LQR Control of Partial Differential Equations Mathematics 1999-12-17
Hutton, Richard Shane Modeling the United States Unemployment Rate with the Preisach Model of Hysteresis Mathematics 2009-05-11
Hymo, John A. Problems involving relative integral bases for quartic number fields Mathematics 2005-09-20
Inch, Scott E. Precise energy decay rates for some viscoelastic and thermo-viscoelastic rods Mathematics 2005-10-19
Ison, Molly E. Two Aspects of Topology in Graph Configuration Spaces Mathematics 2005-10-07
Jarvis, Christopher Hunter Reduced Order Model Study of Burgers' Equation using Proper Orthogonal Decomposition Mathematics 2012-03-30
Jia, Bei D-branes and K-homology Mathematics 2013-04-29
Joseph, Daniel Scott Parameter Identification for the Preisach Model of Hysteresis Mathematics 2001-04-26
Jump, Addison B. Mathematical analysis of a large-gap electromagnetic suspension system Mathematics 2008-06-06
Junnila, Heikki J. K. Covering properties and quasi-uniformities of topological spaces. Mathematics 2010-03-13
Kachroo, Pushkin Optimal and Feedback Control for Hyperbolic Conservation Laws Mathematics 2007-06-10
Kaffel, Ahmed On the stability of plane viscoelastic shear flows in the limit of in finite Weissenberg and Reynolds numbers Mathematics 2011-03-22
Kang, Jinghong The Computational Kleinman-Newton Method in Solving Nonlinear Nonquadratic Control Problems Mathematics 1998-04-23
Kang, Sungkwon A control problem for Burgers' equation Mathematics 2006-02-01
Kang, Jeongook Kim Interpolation by rational matrix functions with minimal McMillan degree Mathematics 2006-05-11
Kang, Kyehong A structured reduced sequential quadratic programming and its application to a shape design problem Mathematics 2006-06-07
Karamikhova, Rossitza A finite element analysis of high kappa, high field Ginzburg-Landau type model of superconductivity Mathematics 2006-08-14
Karcher, Kelli Marie The Space of Left Orders on a Group Mathematics 2011-05-17
Keane, Michael K. Hysteresis phenomena of ferromagnetic bodies using the nonlocal exchange energy model Mathematics 2008-06-06
Kelly, Erin Webster The Expanding Constant, Ramanujan Graphs, and Winnie Li Graphs Mathematics 2006-05-19
Kim, Jeong Hoon Stochastic turning point problem Mathematics 2005-10-20
Kim, Hongchul Analysis and finite element approximation of an optimal shape control problem for the steady-state Navier-Stokes equations Mathematics 2008-06-06
Knudson, Kevin Patrick Separation and covering properties of frames Mathematics 2009-04-08
Kovacs, Denis Christoph Inertial Manifolds and Nonlinear Galerkin Methods Mathematics 2006-01-03
Krahnke, Andreas The Clarke Derivative and Set-Valued Mappings in the Numerical Optimization of Non-Smooth, Noisy Functions Mathematics 2001-05-03
Kramer, Boris Model Reduction of the Coupled Burgers Equation in Conservation Form Mathematics 2011-08-26
Krishnamurthy, Ravi S. Enhanced intersection cutting plane and reformulation-linearization enumeration based approaches for linear complementarity problems Mathematics 2006-06-07
Krometis, Justin Lane Preference in a Simple Traffic Model Mathematics 2004-04-30
Krueger, Denise A. Stabilized Finite Element Methods for Feedback Control of Convection Diffusion Equations Mathematics 2004-08-02
Kuhlman, Christopher James Generalizations of Threshold Graph Dynamical Systems Mathematics 2013-05-15
Laadj, Toufik Initial Value Problems for Creeping Flow of Maxwell Fluids Mathematics 2011-02-24
Landquist, Eric Jon On Nonassociative Division Rings and Projective Planes Mathematics 2000-05-18
Lanz, Colleen B The Use of Schwarz-Christoffel Transformations in Determining Acoustic Resonances Mathematics 2010-07-08
Leamer, Micah J. Groebner Finite Path Algebras Mathematics 2004-07-06
Lee, Hyesuk Kwon Optimization Based Domain Decomposition Methods for Linear and Nonlinear Problems Mathematics 1997-06-27
Lee, Gyou-Bong A study of the computation and convergence behavior of eigenvalue bounds for self-adjoint operators Mathematics 2005-10-14
Lee, Hyung-Chun Analysis, finite element approximation, and computation of optimal and feedback flow control problems Mathematics 2006-03-02
Lei, Peng The Cauchy problem for the Diffusive-Vlasov-Enskog equations Mathematics 2006-05-04
Lengyel, Eric Hyperreal structures arising from an infinite base logarithm Mathematics 2008-10-01
Li, Xiaoguang Moment sequences and their applications Mathematics 2005-10-20
Liang, Xiaoming A class of weighted Bergman spaces, reducing subspaces for multiple weighted shifts, and dilatable operators Mathematics 2006-08-14
Liu, Rongsheng Global existence in L1 for the square-well kinetic equation Mathematics 2005-10-24
Liu, Fang-Lan Some asymptotic stability results for the Boussinesq equation Mathematics 2005-10-21
Lu, Jing A Mathematical Model of Horizontal Wells Productivity and Well Testing Analysis Mathematics 1998-09-03
Lynch, Keith On triangles and quadrilaterals of groups Mathematics 2006-06-07
Mackin, Gail S. On an Order-Parameter Model of Solid-Solid Phase Transitions Mathematics 1997-07-28
Marrekchi, Hamadi Dynamic compensators for a nonlinear conservation law Mathematics 2006-05-04
Maruhn, Jan Hendrik An augmented Lagrangian algorithm for optimization with equality constraints in Hilbert spaces Mathematics 2001-05-02
Massa, Kenneth L. Control of Burgers' Equation With Mixed Boundary Conditions Mathematics 1998-03-23
Massey, Thomas Christopher A Flexible Galerkin Finite Element Method with an A Posteriori Discontinuous Finite Element Error Estimation for Hyperbolic Problems Mathematics 2002-07-10
Mattox, Wade Homology of Group Von Neumann Algebras Mathematics 2012-07-25
McBee, Brian K Computational Approaches to Improving Room Heating and Cooling for Energy Efficiency in Buildings Mathematics 2011-09-08
McCall, Thomas Mark Units and class groups of imaginary octic fields Mathematics 2006-05-11
McCoy, Daisy Cox Irreducible elements in algebraic number fields Mathematics 2005-10-19
McGee, John J. René Schoof's Algorithm for Determining the Order of the Group of Points on an Elliptic Curve over a Finite Field Mathematics 2006-04-25
McGilvray, H. C. A Classification of some Quadratic Algebras Mathematics 1998-07-02
McLewin, Kelly English Octonions and the Exceptional Lie Algebra g_2. Mathematics 2004-04-23
Mechaii, Idir A Posteriori Error Analysis for a Discontinuous Galerkin Method Applied to Hyperbolic Problems on Tetrahedral Meshes Mathematics 2012-04-03
Menndez Gmez, Jos Mara Computational Methods for Control of Queueing Models in Bounded Domains Mathematics 2007-06-13
Michalski, Milosz R. Perturbation theory for the topological pressure in analytic dynamical systems Mathematics 2005-10-12
Miller, Nicole Renee The Structure of the Class Group of Imaginary Quadratic Fields Mathematics 2005-05-11
Miller, Janice E. Representation theory, Borel cross-sections, and minimal measures Mathematics 2006-06-19
Mohammed Al-Yakoob, Salem Mixed-Integer Mathematical Programming Optimization Models and Algorithms For An Oil Tanker Routing and Scheduling Problem Mathematics 1998-07-11
Moore, Julie Carolyn Comparisons of correlation methods in risk analysis Mathematics 2009-06-10
Moss, George W. Mathematical Models of the Alpha-Beta Phase Transition of Quartz Mathematics 1999-08-10
Mulzet, Alfred Kenric Exponential Stability for a Diffusion equation in Polymer Kinetic Theory Mathematics 1998-07-25
Murrugarra Tomairo, David Manuel Bott Periodicity Mathematics 2007-05-11
Murrugarra Tomairo, David M. Algebraic Methods for Modeling Gene Regulatory Networks Mathematics 2012-07-24
Newbury, Golnar A Numerical Study of a Delay Differential Equation Model for Breast Cancer Mathematics 2007-08-08
Newman, Christopher K. Exponential Integrators for the Incompressible Navier-Stokes Equations Mathematics 2003-10-22
Nguyen, Vinh Q. A Numerical Study of Burgers' Equation With Robin Boundary Conditions Mathematics 2001-02-20
Nguyen, Hoan Kim Huynh Volterra Systems with Realizable Kernels Mathematics 2004-04-29
Niese, Elizabeth M Combinatorial Properties of the Hilbert Series of Macdonald Polynomials Mathematics 2010-04-08
Oates, Kimberly L A study of control system radii for approximations of infinite dimensional systems Mathematics 2009-10-10
Olds, Shana D. Modeling and LQR Control of a Two-Dimensional Airfoil Mathematics 1998-07-20
Ordonez-Delgado, Bartleby Algebras of Toeplitz Operators Mathematics 2006-05-08
Ordonez-Delgado, Bartleby An Embedded Toeplitz Problem Mathematics 2010-09-17
Oremland, Matthew Scott Optimization and Optimal Control of Agent-Based Models Mathematics 2011-05-16
Park, Young Wook Large deviation theory for queueing systems Mathematics 2005-10-14
Patra, Ramakanta A model for Hybrid Dynamic Beam Movement with Specific Application to Wind Energy Units Mathematics 2011-08-19
Pierson, Mark A Theory and Application of a Class of Abstract Differential-Algebraic Equations Mathematics 2005-04-28
Pitts, George Gustav Domain decomposition and high order discretization of elliptic partial differential equations Mathematics 2006-08-14
Plaxco, David Bryant Relationship Between Students' Proof Schemes and Definitions Mathematics 2011-05-17
Pond, Kevin R Multidimensional Adaptive Quadrature Over Simplices Mathematics 2010-08-17
Potanka, Karen Sue Groups, Graphs, and Symmetry-Breaking Mathematics 1998-04-16
Potter, Dustin Paul A combinatorial approach to scientific exploration of gene expression data: An integrative method using Formal Concept Analysis for the comparative analysis of microarray data Mathematics 2005-08-25
Pugh, Steven M. Finite element approximations of Burgers' equation Mathematics 2009-12-05
Puls, Michael Analytic versions of the zero divisor conjecture Mathematics 2006-06-07
Qiu, James Zhijan Polynomial approximation and Carleson measures on a general domain and equivalence classes of subnormal operators Mathematics 2008-06-06
Rai, Tapan S Infinite Groebner Bases And Noncommutative Polly Cracker Cryptosystems Mathematics 2004-03-26
Rakowska, Joanna Tracing parametrized optima for inequality constrained nonlinear minimization problems Mathematics 2005-10-10
Ramirez, Edgardo Finite element methods for parameter identification problem of linear and nonlinear steady-state diffusion equations Mathematics 1997-12-17
Ranalli, Ramona Renee The Structure of the 2-Sylow Subgroups of the Ideal Class Groups of Imaginary Bicyclic Biquadratic Fields Mathematics 1997-11-18
Rautenberg, Carlos Nicolas A Distributed Parameter Approach to Optimal Filtering and Estimation with Mobile Sensor Networks Mathematics 2010-04-21
Repp, Andrew S. Discrete Riemann Maps and the Parabolicity of Tilings Mathematics 1998-05-04
Rivera-Marrero, Olgamary The place of discrete mathematics in the school curriculum: An analysis of preservice teachers’ perceptions of the integration of discrete mathematics into secondary level courses Mathematics 2007-04-25
Roinestad, Kristine A. Geometry of Self-Similar Sets Mathematics 2007-05-11
Roinestad, Kristine A Geometry of Fractal Squares Mathematics 2010-04-15
Rothstein, Ivan Semiclassical Scattering for Two and Three Body Systems Mathematics 2004-08-17
Rubio, Diana Distributed Parameter Control of Thermal Fluids Mathematics 1998-07-21
Saenz Maldonado, Edgar Arturo Brjuno Numbers and Complex Dynamics Mathematics 2008-04-30
Saenz Maldonado, Edgar Arturo On Nearly Euclidean Thurston Maps Mathematics 2012-05-10
Savel'ev, Evgeny Controllability of the Stresses in Multimode Viscoelastic Fluid of Upper Convected Maxwell Type Mathematics 2009-07-01
Schenck, David Robert Some Formation Problems for Linear Elastic Materials Mathematics 1999-08-10
Seyedin, Massood Local properties of transitive quasi-uniform spaces. Mathematics 2010-06-12
Shapiro, Bradley Thomas Ability Tracking and Class Mobility in High School Mathematics: The Case of Low Achievers Mathematics 2009-05-08
Shaw, Leah Belinda Monte Carlo and Series Expansion Studies of the Anisotropic Driven Ising Lattice Gas Phase Diagram Mathematics 1999-04-23
Siehler, Jacob A. Near-Group Categories Mathematics 2003-04-18
Singler, John Sensitivity Analysis of Partial Differential Equations With Applications to Fluid Flow Mathematics 2005-06-16
Smith, Nathan A. Syzygy Decompositions and Projective Resolutions Mathematics 1999-04-21
Smith, Lyle C. Finite Element Approximations of Burgers' Equation with Robin's Boundary Conditions Mathematics 1997-07-31
Smith, Manfred Charles A nonlinear Volterra equation of nonconvolution type Mathematics 2012-08-01
Song, Degong On the Spectrum of Neutron Transport Equations with Reflecting Boundary Conditions Mathematics 2000-03-07
Spies, Ruben Daniel Mathematical modelling, finite dimensional approximations and sensitivity analysis for phase transitions in shape memory alloys Mathematics 2008-06-06
Stanley, Lisa Gayle Computational Methods for Sensitivity Analysis with Applications to Elliptic Boundary Value Problems Mathematics 1999-08-03
StClair, Jessica Lindsey Geometry of Spaces of Planar Quadrilaterals Mathematics 2011-04-15
Stewart, Dawn L. Numerical Methods for Accurate Computation of Design Sensitivities Mathematics 1998-06-10
Stigler, Brandilyn Suzanne An Algebraic Approach to Reverse Engineering with an Application to Biochemical Networks Mathematics 2005-08-25
Stoyanov, Miroslav Karolinov Optimal Linear Feedback Control for Incompressible Fluid Flow Mathematics 2006-06-06
Stoyanov, Miroslav Reduced Order Methods for Large Scale Riccati Equations Mathematics 2009-05-21
Strauss, Arne Karsten Numerical Analysis of Jump-Diffusion Models for Option Pricing Mathematics 2006-07-07
Sudler, Glenn F. Asian Options: Inverse Laplace Transforms and Martingale Methods Revisited Mathematics 1999-08-01
Sutton, Daniel Joseph Structure of Invariant Subspaces for Left-Invertible Operators on Hilbert Space Mathematics 2010-08-26
Taylor, Frank Seaton Quintic Abelian Fields Mathematics 1997-12-17
Taylor, Jesse H An application of signature of smooth manifolds Mathematics 2009-07-29
Temimi, Helmi A Discontinuous Galerkin Method for Higher-Order Differential Equations Applied to the Wave Equation. Mathematics 2008-03-18
Timsina, Tirtha Prasad Sensitivities in Option Pricing Models Mathematics 2007-09-08
Tressler, Eric Paul A Survey of the Hadamard Conjecture Mathematics 2004-05-04
van Wyk, Hans-Werner A Variational Approach to Estimating Uncertain Parameters in Elliptic Systems Mathematics 2012-05-10
Vance, James Aaron Permanent Coexistence for Omnivory Models Mathematics 2006-08-14
Veliz-Cuba, Alan A. The Algebra of Systems Biology Mathematics 2010-07-09
Vera-Licona, Martha Paola Algorithms for modeling and simulation of biological systems; applications to gene regulatory networks Mathematics 2007-06-18
Vugrin, Kay E. On the Effect of Numerical Noise in Simulation-Based Optimization Mathematics 2003-03-25
Vugrin, Eric D. On Approximation and Optimal Control of Nonnormal Distributed Parameter Systems Mathematics 2004-04-28
Vugrin, Kay Ellen White On the Effects of Noise on Parameter Identification Optimization Problems Mathematics 2005-05-03
Wang, Yuan Convergence and Boundedness of Probability-One Homotopies for Model Order Reduction Mathematics 1997-08-13
Wang, Tzin Shaun A Hermite Cubic Immersed Finite Element Space for Beam Design Problems Mathematics 2005-05-17
Wang, Zhu Reduced-Order Modeling of Complex Engineering and Geophysical Flows: Analysis and Computations Mathematics 2012-05-02
Wang, Xiaojun Well-posedness results for a class of complex flow problems in the high Weissenberg number limit Mathematics 2012-05-11
Weinhart, Thomas A Posteriori Error Analysis of the Discontinuous Galerkin Method for Linear Hyperbolic Systems of Conservation Laws Mathematics 2009-03-31
Wilkerson, Mary Elizabeth Circle Packing in Euclidean and Hyperbolic Geometries Mathematics 2008-05-08
Wilkerson, Mary Finite Subdivision Rules from Matings of Quadratic Functions: Existence and Constructions Mathematics 2012-05-07
Wills, Andrew Johan Topics in Inverse Galois Theory Mathematics 2011-05-03
Wise, Steven Matthew POLSYS_PLP: A Partitioned Linear Product Homotopy Code for Solving Polynomial Systems of Equations Mathematics 1998-08-20
Wyatt, Sarah Alice Inexact Solves in Interpolatory Model Reduction Mathematics 2009-05-20
Wyatt, Sarah Alice Issues in Interpolatory Model Reduction: Inexact Solves, Second-order Systems and DAEs Mathematics 2012-05-11
Xie, Xuping Approximate Deconvolution Reduced Order Modeling Mathematics 2015-11-23
Yang, Liming Subnormal operators, hyponormal operators, and mean polynomial approximation Mathematics 2005-10-24
Yordanov, Russi Georgiev On the Cauchy problem for the linearized GPKdV and gauge transformations for a quadratic pencil and AKNS system Mathematics 2008-06-06
Yu, Tungsheng On-line Traffic Signalization using Robust Feedback Control Mathematics 1997-12-18
Yu, Haofeng A Numerical Investigation Of The Canonical Duality Method For Non-Convex Variational Problems Mathematics 2011-09-25
Zhang, Xiaohong Optimal feedback control for nonlinear discrete systems and applications to optimal control of nonlinear periodic ordinary differential equations Mathematics 2005-10-26
Zhang, Lan Parameter identification in linear and nonlinear parabolic partial differential equations Mathematics 2006-05-11
Zhang, Jingwei Numerical Methods for the Chemical Master Equation Mathematics 2009-12-09
Zhu, Jinghao Some results on nonlinear optimal control Mathematics 2006-10-04
Abbott, Michael Shawn Kinematics, Dynamics and Control of Single-Axle, Two-Wheel Vehicles (Biplanar Bicycles) Mechanical Engineering 2000-04-13
Abbott, Mark William Open Loop Compliance Model of a 6 DOF Revolute Manipulator to Improve Accuracy Under Load Mechanical Engineering 2002-04-25
Abbott, Ashley Burnett Analysis of Thermal Energy Collection from Precast Concrete Roof Assemblies Mechanical Engineering 2004-08-19
Abdel-Wahab, Samer Large Eddy Simulation of Flow and Heat Transfer in a Staggered 45° Ribbed Duct and a Rotating 90° Ribbed Duct Mechanical Engineering 2003-12-03
Abel, Jeffry J. Three-dimensional velocity extraction using laser Doppler vibrometry Mechanical Engineering 2009-12-04
Abraham, Santosh Heat Transfer and Flow Measurements on a One-Scale Gas Turbine Can Combustor Model Mechanical Engineering 2008-09-24
Abraham, Santosh Aerodynamic Performance of High Turning Airfoils and the Effect of Endwall Contouring on Turbine Performance Mechanical Engineering 2011-09-09
Ackerman, Anthony E. Dynamic transduction characterization of magnetostrictive actuators Mechanical Engineering 2009-12-04
Adams, Michael B. Finite element analysis of composite tubes with integral ends subjected to bending loads Mechanical Engineering 2009-07-29
Adams, Joseph T. Neural network calibration of moderator temperature coefficient measurements in pressurized water nuclear reactors Mechanical Engineering 2009-12-04
Adams, Michael Stability Analysis of a Turbocharger for Marine Diesel Engine Service Mechanical Engineering 2012-04-30
Adjerid, Khaled A Study on the Dynamic Characterization of a Tunable Magneto-Rheological Fluid-Elastic Mount in Squeeze Mode Vibration Mechanical Engineering 2011-06-17
Adler, W. Alexander Testing and Understanding Screwdriver Bit Wear Mechanical Engineering 1998-05-18
Afshari, Mana Vibration- and Impedance-based Structural Health Monitoring Applications and Thermal Effects Mechanical Engineering 2012-06-05
Aftel, Robert Effect of atomization gas properties on droplet atomization in an "air-assist" atomizer Mechanical Engineering 2010-05-11
Agee, Barry L Development of a laser-based automated mechanical mobility measurement system for one-dimensional experimental modal analysis Mechanical Engineering 2009-12-04
Aguilar, Felix A numerical analysis of turbulent flow along an abruptly rotated cylinder. Mechanical Engineering 2010-05-13
Ainslie, Walter E. The effect of solidity on the pre- and post-stall flow in a linear compressor cascade Mechanical Engineering 2010-07-07
Ajmani, Kumud Preconditioned conjugate gradient methods for the Navier-Stokes equations Mechanical Engineering 2005-10-13
Akle, Barbar Jawad Multilayer Ionic Transducers Mechanical Engineering 2003-04-16
Akle, Barbar Jawad Characterization and Modeling of the Ionomer-Conductor Interface in Ionic Polymer Transducers Mechanical Engineering 2005-08-16
Akseraylian, Dikran A computational study of the 3D flow and performance of a vaned radial diffuser Mechanical Engineering 2008-11-18
Alberi, Thomas James A Proposed Standardized Testing Procedure for Autonomous Ground Vehicles Mechanical Engineering 2008-05-07
Albright, Eric V. B. Activation energy of Douglas fir char gasification by carbon dioxide Mechanical Engineering 2009-10-31
Alday, John Hane The correlation of randomness with high tip losses in an axial flow fan stage Mechanical Engineering 2009-11-24
Alhazza, Khaled Nonlinear Vibrations of Doubly Curved Cross-PLy Shallow Shells Mechanical Engineering 2002-12-11
Ali Akbar Soltan, Reza Enhancements in Markovian Dynamics Mechanical Engineering 2012-04-04
Allen, David W Software for Manipulating and Embedding Data Interrogation Algorithms Into Integrated Systems Mechanical Engineering 2004-09-20
Allen, James Brandon Estimating Uncertainties in the Joint Reaction Forces of Construction Machinery Mechanical Engineering 2009-05-20
Allen, Matthew Paul Analysis and Synthesis of Aicraft Engine Fan Noise for Use in Psychoacoustic Studies Mechanical Engineering 2012-05-02
Alley, Robert Jesse VTool: A Method for Predicting and Understanding the Energy Flow and Losses in Advanced Vehicle Powertrains Mechanical Engineering 2012-06-22
Allison, Timothy Charles System Identification via the Proper Orthogonal Decomposition Mechanical Engineering 2007-11-01
Alonso-Miralles, Jose Santiago Theoretical Modeling with Validation of a Combined HQ-Liner System for Turbofan Engine Noise Control Mechanical Engineering 2004-09-29
Alsaeed, Ali A. Dynamic Stability Evaluation of an Automotive Turbocharger Rotor-Bearing System Mechanical Engineering 2005-05-10
Alsaeed, Ali A. A Study of Methods for Improving the Dynamic Stability of High-Speed Turbochargers Mechanical Engineering 2010-04-06
Alvarado, Carlos Mariano The role of the thermal contact conductance in the interpretation of laser flash data in fiber-reinforced composites Mechanical Engineering 2009-10-06
Alvarez, Juan C. Evaluation of Moisture Diffusion Theories in Porous Materials Mechanical Engineering 1998-08-07
Anders, William S. Structural acoustic analysis of shape memory alloy hybrid composite panels Mechanical Engineering 2008-11-01
Andersen, Erik Multibody Dynamics Modeling and System Identification for a Quarter-Car Test Rig with McPherson Strut Suspension Mechanical Engineering 2007-05-24
Andersen, Ted Thanning A study of thermographic phosphor thermometry in an operating turbofan engine Mechanical Engineering 2009-02-13
Anderson, Jason Mitchell Non-Intrusive Sensing and Feedback Control of Serpentine Inlet Flow Distortion Mechanical Engineering 2003-04-22
Anderson, Roger J. Characterization of Performance, Robustness, and Behavior Relationships in a Directly Connected Material Handling System Mechanical Engineering 2006-04-18
Anderson, David Splined Speed Control using SpAM (Speed-based Acceleration Maps) for an Autonomous Ground Vehicle Mechanical Engineering 2008-01-29
Andrew, Philip L. Experimental and numerical investigations of the off-design flow physics in a supersonic through-flow fan cascade Mechanical Engineering 2008-07-28
Angster, Scott Reed An object-oriented, knowledge-based, non-procedural approach to multi-disciplinary, parametric, conceptual design Mechanical Engineering 2009-12-05
Annis, Nathanael D. Development of a Visual Demonstration Platform for Parallel Evaluation of Active Suspension Systems Mechanical Engineering 2006-12-03
Anto, Karu Effects of Tip Clearance Gap and Exit Mach Number on Turbine Blade Tip and Near-Tip Heat Transfer Mechanical Engineering 2012-05-15
Anton, Steven Robert Baseline-Free and Self-Powered Structural Health Monitoring Mechanical Engineering 2008-06-24
Anton, Steven Robert Multifunctional Piezoelectric Energy Harvesting Concepts Mechanical Engineering 2011-04-27
Anwar, Aamir Low Frequency Finite Element Modeling of Passive Noise Attenuation in Ear Defenders Mechanical Engineering 2005-02-09
Archibald, Charles Mark Parametric spatial modal analysis of beams Mechanical Engineering 2007-02-02
Archibald, Charles Mark Experimental determination of the impulse response function for elastic vibrating systems Mechanical Engineering 2009-02-13
Arcot, Ramakant P. Computer simulation of the Bristol compressor suspension system dynamics Mechanical Engineering 2009-09-05
Armstrong, Kenneth Weber A Microscopic Continuum Model of a Proton Exchange Membrane Fuel Cell Electrode Catalyst Layer Mechanical Engineering 2004-09-16
Arsalis, Alexandros Thermoeconomic Modeling and Parametric Study of Hybrid Solid Oxide Fuel Cell – Gas Turbine – Steam Turbine Power Plants Ranging from 1.5 MWe to 10 MWe Mechanical Engineering 2007-01-20
Arun, V. The solution of variable-geometry truss problems using new homotopy continuation methods Mechanical Engineering 2005-09-16
Awa, Teck Wah Design of a pultrusion die using a design optimization technique Mechanical Engineering 2009-08-18
Ayres, John W. Qualitative health monitoring and incipient damage inspection/evaluation Mechanical Engineering 2009-06-11
Bacha, Andrew Reed Line Detection and Lane Following for an Autonomous Mobile Robot Mechanical Engineering 2005-05-26
Baheti, Sanjay K. Non-linear finite element thermo-hydrodynamic analysis of oil ring seals used in high pressure centrifugal compressors Mechanical Engineering 2008-06-06
Baik, Jungshik Experimental Investigation of the Effect of Composition on the Performance and Characteristics of PEM Fuel Cell Catalyst Layers Mechanical Engineering 2006-08-09
Bailie, Samuel Todd Effects of Inlet Guide Vane Flow Control on Forced Response of a Transonic Fan Mechanical Engineering 2003-11-07
Baity, Sean Marshall Development of a Next-generation Experimental Robotic Vehicle (NERV) that Supports Intelligent and Autonomous Systems Research Mechanical Engineering 2005-12-13
Baker, Donald Alexander A Finite Element Study of Stresses in Stepped Splined Shafts, and Partially Splined Shafts Under Bending, Torsion, and Combined Loadings Mechanical Engineering 2000-11-09
Baker, Karen Irene Unsteady surface heat flux and temperature measurements Mechanical Engineering 2009-12-04
Balakrishnan, Mahalingam The Role of Turbulence on the Entrainment of a Single Sphere and the Effects of Roughness on Fluid-Solid Interaction Mechanical Engineering 1997-08-28
Balakrishnan, Sreenath A Numerical Elastic Model for Deforming Bat Pinnae Mechanical Engineering 2010-12-22
Balbahadur, Avinash Chetnand A Thermoelastohydrodynamic Model of The Morton Effect Operating in Overhung Rotors Supported by Plain or Tilting Pad Journal Bearings Mechanical Engineering 2001-03-06
Ballew, Brent Steven Advanced Multibody Dynamics Modeling of the Freight Train Truck System Mechanical Engineering 2008-05-13
Barber, Matthew James Experimental investigation of normal, sonic injection through a wedge-shaped nozzle into supersonic flow Mechanical Engineering 2009-08-22
Barbi, Eric Uncooled choked plasma torch for ignition and flameholding in supersonic combustion Mechanical Engineering 2013-11-15
Barker, Daniel Keith Active dynamic response tuning of adaptive composites utilizing embedded nitinol actuators Mechanical Engineering 2009-03-04
Barnett, Shane Development of a Tow Capacity Test Device for Small Unmanned Vehicles. Mechanical Engineering 2006-01-16
Barnobi, Christopher Louis Improvement In Acoustic Liner Attenuation In Turbofan Engines By Means Of Plasma Synthetic Jet Actuator Mechanical Engineering 2010-07-15
Barreto, Joel Experimental Design for Estimating Electro-Thermophysical Properties of a Thermopile Thermal Radiation Detector Mechanical Engineering 1998-07-16
Barringer, Michael David Design and Benchmarking of a Combustor Simulator Relevant to Gas Turbine Engines Mechanical Engineering 2001-10-29
Barringer, Michael David Developing and Testing a Combustor Simulator For Investigating High Pressure Turbine Aerodynamics and Heat Transfer Mechanical Engineering 2006-07-24
Barry, Mamadou Yaya Heat Transfer Issues in Thin-Film Thermal Radiation Detectors Mechanical Engineering 1999-12-20
Bash, Travis Joel Active Magnetic Bearings used as an Actuator for Rotor Health Monitoring in Conjunction with Conventional Support Bearings Mechanical Engineering 2005-07-09
Bass, Henry Morgan Automatic modification of part geometries subject to manufacturing constraints using fuzzy logic Mechanical Engineering 2005-10-07
Bauman, Cheryl Lynn Autonomous Navigation of a Ground Vehicle to Optimize Communication Link Quality Mechanical Engineering 2006-12-19
Bays, Matthew Jason Stochastic Motion Planning for Applications in Subsea Survey and Area Protection Mechanical Engineering 2012-04-10
Beall, Jeffery C. Stored waveform adaptive motor control Mechanical Engineering 2013-11-15
Beaulieu, Jason A Dynamic, Interactive Approach to Learning Engineering and Mathematics Mechanical Engineering 2012-05-03
Becker, William J Dynamic surface temperature measurement on the first stage turbine blades in a turbofan jet engine test rig Mechanical Engineering 2010-07-15
Bell, Robert M Mass flow and temperature measurements in the flue of a woodburning appliance Mechanical Engineering 2009-07-21
Bennett, Matthew Damon Manufacture and Characterization of Ionic Polymer Transducers Employing Non-Precious Metal Electrodes Mechanical Engineering 2002-05-23
Bennett, Matthew Damon Electromechanical Transduction in Ionic Liquid-Swollen Nafion Membranes Mechanical Engineering 2005-11-01
Bernardo, Jesse Raymond Indirect Tissue Scaffold Fabrication via Additive Manufacturing and Biomimetic Mineralization Mechanical Engineering 2010-12-19
Berrien, La Shaun Josette Biotribology: Studies of the Effects of Biochemical Environments on the Wear and Damage of Articular Cartilage Mechanical Engineering 1999-07-13
Berry, Maurice Robert An integral analysis of two-phase annularmist condensing flows. Mechanical Engineering 2010-06-12
Bertsch, Remi An experimental examination of the influence of trailing-edge coolant ejection on blade losses in transonic turbine cascades Mechanical Engineering 2009-03-03
Betts, Juan Fernando Finite Element Study of Plane Wave Acoustic Phenomena in Ducts Mechanical Engineering 1998-04-29
Betts, Juan Fernando Experiments and Impedance Modeling of Liners Including The Effect of Bias Flow Mechanical Engineering 2000-08-11
Beyene, Samson Feasibility study of a hydrid passive/active noise absorption system Mechanical Engineering 2009-12-05
Bhaduri, Sreyoshi Algorithm to enable intelligent rail break detection Mechanical Engineering 2013-12-24
Bhargava, Adesh Experimental/analytical determination of optimal piezoelectric actuator locations on complex structures based on the actuator power factor Mechanical Engineering 2009-08-22
Bhargave, Ashutosh Sadashiva Forced convection heat transfer from extended surfaces with finned pins Mechanical Engineering 2010-07-28
Biddle, Richard Scull Performance tests and cooling effect distribution of the V.P.I. forced draft cooling tower Mechanical Engineering 2013-02-06
Bieryla, Kathleen Ann A Preliminary Study of Trip Recovery Training in Older Adults for Use as a Fall Prevention Intervention Mechanical Engineering 2006-05-03
Bieryla, Kathleen Ann An investigation of perturbation-based balance training as a fall prevention intervention for older adults Mechanical Engineering 2009-07-30
Bilgen, Onur Macro Fiber Composite Actuated Unmanned Air Vehicles: Design, Development, and Testing Mechanical Engineering 2007-05-22
Bilgen, Onur Aerodynamic and Electromechanical Design, Modeling and Implementation Of piezocomposite Airfoils Mechanical Engineering 2010-08-14
Billingsley, Matthew Crockett Plasma Torch Atomizer-Igniter for Supersonic Combustion of Liquid Hydrocarbon Fuels Mechanical Engineering 2005-12-20
Bindiganavle, Karthik An optimal approach to geometric trimming of B-spline surfaces Mechanical Engineering 2001-04-19
Binns, Robert Michael Improved Terrain Measurement System for Estimation of Global Terrain Features, Surface Roughness, and Texture Mechanical Engineering 2010-11-03
Bird, John Paul Model of the Air System Transients in a Fuel Cell Vehicle Mechanical Engineering 2002-03-27
Bird, John Paul Mixed Modes of Autonomy for Scalable Communication and Control of Multi-Robot Systems Mechanical Engineering 2011-10-07
Black, Thomas Andrew Spectral Element Analysis of Bars, Beams, and Levy Plates Mechanical Engineering 2005-05-26
Black, Paul Randall Acoustic Transfer Functions Derived from Finite Element Modeling for Thermoacoustic Stability Predictions of Gas Turbine Engines Mechanical Engineering 2007-07-12
Blackett, Ricardo Corey Optimal Synthesis of Planar Five-link Mechanisms for the Production of Nonlinear Mechanical Advantage Mechanical Engineering 2001-03-29
Blair, Jeffrey Russell Near field behavior of reacting free jets Mechanical Engineering 2009-08-22
Blanc, Arthur Control of Sound Radiation From Structures with Periodic Smart Skins Mechanical Engineering 2001-09-17
Blanchard, Emmanuel Dominique On the Control Aspects of Semiactive Suspensions for Automobile Applications Mechanical Engineering 2003-07-03
Blanchard, Emmanuel Dominique Polynomial Chaos Approaches to Parameter Estimation and Control Design for Mechanical Systems with Uncertain Parameters Mechanical Engineering 2010-04-09
Blanks, Joseph E. Optimal Design of an Enclosure for a Portable Generator Mechanical Engineering 1998-07-11
Blevins, Linda G Effects of high levels of steam addition on NO{u0078} reduction in laminar opposed flow diffusion flames Mechanical Engineering 2010-05-04
Bloch, Gregory S Flow losses in supersonic compressor cascades Mechanical Engineering 2008-06-06
Bloch, Gregory S A wide-range axial-flow compressor stage performance model Mechanical Engineering 2009-08-18
Blotter, Jonathan D Structural energy and power flow using a scanning laser Doppler vibrometer Mechanical Engineering 2008-06-06
Blumber, Eric Joseph Testing of a Magnetically Levitated Rocket Thrust Measurement System Demonstrator for NASA Mechanical Engineering 2002-06-26
Boe, Maria Utilizing Visual Illusions To Identify and Understand Perceptual Discrepancies in Product Design Mechanical Engineering 2006-11-28
Boggs, Christopher Matthew Field Study to Evaluate Driver Fatigue Performance in Air-Inflated Truck Seats Mechanical Engineering 2004-07-25
Boggs, Christopher Matthew The Use of Simulation to Expedite Experimental Investigations of the Effect of High-Performance Shock Absorbers Mechanical Engineering 2009-02-03
Bolchoz, Ruford Joseph "An Experimental Investigation of Showerhead Film Cooling Performance in a Transonic Vane Cascade at Low Freestream Turbulence" Mechanical Engineering 2008-05-21
Boller, Shaun M. One-Dimensional Dynamic Wake Response in an Isolated Rotor due to Inlet Total Pressure Distortion Mechanical Engineering 1998-10-20
Bongiovi, Robert P A parametric study of the radiative and optical characteristics of a scanning radiometer for Earth Radiation Budget applications using the Monte-Carlo method Mechanical Engineering 2009-12-05
Borg, Lane An Approach to Using Finite Element Models to Predict Suspension Member Loads in a Formula SAE Vehicle Mechanical Engineering 2009-07-15
Boulanger, Andrew James Feasibility Study of a Natural Uranium Neutron Spallation Target using FLiBe as a Coolant Mechanical Engineering 2011-05-18
Boyd, Steven J Hybrid Electric Vehicle Control Strategy Based on Power Loss Calculations Mechanical Engineering 2006-09-08
Boyer, Keith Michael An Improved Streamline Curvature Approach for Off-Design Analysis of Transonic Compression Systems Mechanical Engineering 2001-05-03
Bradley, Randall S The effect of molecular weight on the behavior of polystyrene coated steel disks under fretting conditions Mechanical Engineering 2010-07-21
Brady, Lori Ann Application of the Herschel-Quincke Tube Concept to Higher-Order Acoustic Modes in Two-Dimensional Ducts Mechanical Engineering 2002-03-15
Brandon, Sidney Jordan Effects of Heat Addition After the Exhaust Valve on a Small Turbocharged Diesel Engine Mechanical Engineering 2006-04-24
Bras, Jean-Marc Francois Development of a Standardized Method for Actuator Characterization using Active Control of Impedance Mechanical Engineering 1999-11-01
Braunwart, Paul R. Experimental and Analytical Examination of Golf Club Dynamics Mechanical Engineering 1999-03-19
Brecht, Thoralf A relaxation method for the solution of rotational transonic nozzle flow. Mechanical Engineering 2010-06-08
Brevart, Bertrand J Active control of coupled wave propagation in fluid-filled elastic cylindrical shells Mechanical Engineering 2007-10-03
Brewer, Keith Merritt Exergy Methods for the Mission-Level Analysis and Optimization of Generic Hypersonic Vehicles Mechanical Engineering 2006-04-28
Brewer, Eric Thomas Autonomous Localization of 1/R^2 Sources Using an Aerial Platform Mechanical Engineering 2009-12-21
Brock, Jerry S. A consistent direct-iterative inverse design method for the Euler equations Mechanical Engineering 2005-10-20
Brock, Jerry S A modified Baldwin-Lomax turbulence model for turbomachinery wakes Mechanical Engineering 2009-09-05
Brockmeier, Oivind Automated Loading and Unloading of the Stratasys FDM 1600 Rapid Prototyping System Mechanical Engineering 2000-03-24
Bromley II, Michael William Pneumatic Particulate Collection System Analysis and Design Mechanical Engineering 2012-06-13
Brown, William Shaler Technology for Designing the Steering Subsystem Component of an Autonomous Vehicle Mechanical Engineering 2007-09-07
Brown, Steven Lewis Hydrodynamics and Transient Heat Transfer Characteristics in Fluidized and Spouted Beds Mechanical Engineering 2012-06-28
Brown III, William E. Development Of Design Equations For A Square-tube Subbase Supporting A Shaft-mounted Speed Reducer Mechanical Engineering 2002-01-18
Brumbaugh, Scott J Development of a Methodology to Measure Aerodynamic Forces on Pin Fins in Channel Flow Mechanical Engineering 2006-01-09
Bruns, Russell Luis Finite element analysis of stresses in an uniaxially loaded elastic sheet containing an interference-fit fastener Mechanical Engineering 2009-10-24
Bryner, Hans Eugen Potential flow solution and incompressible boundary layer for a two-dimensional cascade. Mechanical Engineering 2010-07-15
Bubb, James Vernon The Influence of Pressure Ratio on Film Cooling Performance of a Turbine Blade Mechanical Engineering 1999-07-15
Bucher, Paulus A study of interactions between laminar flames and walls Mechanical Engineering 2010-05-11
Buechler, Miles A Variational Modeling of Ionic Polymer-Based Structures Mechanical Engineering 2005-08-02
Bunch, Thomas K Performance measurements of a flashing flow nozzle Mechanical Engineering 2009-03-04
Burand, Patrick Hiroshi Evaluation of the Effects of Microporous Layer Characteristics and Assembly Parameters on the Performance and Durability of a Planar PEM Fuel Cell Mechanical Engineering 2009-11-10
Burke, William Churchill Taliaferro Large Force Range Mechanically Adjustable Dampers for Heavy Vehicle Applications Mechanical Engineering 2010-06-02
Burkhardt, Bettina M Development and design of a test device for cartilage wear studies Mechanical Engineering 2008-11-07
Burnett, Bryant Whitney Rousseau Considerations for the Use of an Exoskeleton for Extremity Control and Assistance when Learning to Walk with Cerebral Palsy Mechanical Engineering 2008-05-08
Burr, Janice E Jet mixing :the role of numerical flow visualization Mechanical Engineering 2009-12-16
Busic, John F The design of skin friction gages for measurements in high-speed, short-duration flows Mechanical Engineering 2009-10-06
Bussone, William Linear and Angular Head Accelerations in Daily Life Mechanical Engineering 2005-08-18
Butrym, Brad A. Crack Detection in Aluminum Structures Mechanical Engineering 2010-05-06
Butt, Jeffrey Robert A Study of Morphing Wing Effectiveness in Fighter Aircraft using Exergy Analysis and Global Optimization Techniques Mechanical Engineering 2005-12-21
Cabble, George M. The effect of chromium plating on the endurance limit of 4340 steel Mechanical Engineering 2012-11-07
Cabell, Randolph H. A Principal Component Algorithm for Feedforward Active Noise and Vibration Control Mechanical Engineering 1998-04-17
Cabell, Randolph H. The automatic identification of aerospace acoustic sources Mechanical Engineering 2012-11-21
Cacciola, Stephen J Fusion of Laser Range-Finding and Computer Vision Data for Traffic Detection by Autonomous Vehicles Mechanical Engineering 2007-12-14
Caffee, Joshua Aaron Improvement of Anti-Lock Braking Algorithms Through Parameter Sensitivity Analysis and Implementation of an Intelligent Tire Mechanical Engineering 2010-12-01
Cahill, Joseph E. Identification and Evaluation of Loss and Deviation Models for use in Transonic Compressor Stage Performance Prediction Mechanical Engineering 1997-09-22
Cain, Jason James Collision Analysis of the Reversible Crankshaft Mechanism in a Convertible Refrigeration Compressor Mechanical Engineering 2000-06-08
Caldwell, Sherwood McCraw Analysis of spur gear teeth for static deflections Mechanical Engineering 2010-03-30
Calkins, Joseph Matthew Quantifying Coordinate Uncertainty Fields in Coupled Spatial Measurement systems Mechanical Engineering 2002-08-01
Calkins, Joseph M. Real-time compensation of static deflections in robotic manipulators Mechanical Engineering 2009-12-05
Camargo, Hugo Elias A Frequency Domain Beamforming Method to Locate Moving Sound Sources Mechanical Engineering 2010-05-17
Cambou, Pierre E. A Distributed Active Vibration Absorber (DAVA) for Active-Passive Vibration and Sound Radiation Control Mechanical Engineering 1998-10-07
Cambridge, Shevonn Nathaniel The effect of compression ratio on emissions from an alcohol-fueled engine Mechanical Engineering 2009-09-12
Canfield, Stephen Lee Development of the Carpal Wrist; a Symmetric, Parallel-Architecture Robotic Wrist Mechanical Engineering 1998-07-26
Cantelmi, Frank Joseph Measurement and modeling of in-cylinder heat transfer with inflow-produced turbulence Mechanical Engineering 2009-07-10
Cao, Renfang Power efficiency analysis for an Active structure Mechanical Engineering 2001-04-24
Capelle, Jean-Yves Simulation of an algorithm for the active control of combustion noise Mechanical Engineering 2009-04-25
Cardinali, Alex Victor Validation of a Noninvasive Blood Perfusion Measurement Sensor Mechanical Engineering 2002-07-19
Cardwell, Nicholas Don Effects of Realistic First-Stage Turbine Endwall Features Mechanical Engineering 2005-12-14
Cardwell, Nicholas Don Investigation of Particle Trajectories for Wall Bounded Turbulent Two-Phase Flows Mechanical Engineering 2010-11-17
Carlson, Stephen O. Adaptive control of a four-bar linkage Mechanical Engineering 2012-11-09
Carmack, Andrew Cardin Heat Transfer and Flow Measurements in Gas Turbine Engine Can and Annular Combustors Mechanical Engineering 2012-05-09
Carneal, James P Active structural acoustic control of double panel systems including hierarchical control approaches Mechanical Engineering 2008-06-06
Carneal, James P Experimental investigation of reversed flow in a compressor cascade Mechanical Engineering 2009-04-14
Carnicero Dominguez, Bernardo Antonio Characterization of Pyranometer Thermal Offset and Correction of Historiacal Data Mechanical Engineering 2001-06-28
Carpenter, William K Design of medical waste treatment systems employing bioremediation Mechanical Engineering 2010-05-11
Carr, Angela Sara Position Control Comparison of Equilibrated and Mass Counterweight Systems Mechanical Engineering 2001-04-02
Carroll, Michael David Contact area between cylinders in rolling contact. Mechanical Engineering 2010-06-02
Carroll, Brian R Synchronous Thermal Instability Evaluation of Medium Speed Turbocharger Rotor-Bearing Systems Mechanical Engineering 2012-05-16
Carson, J. Matthew Subharmonic and Non-Subharmonic Pulsed Control of Thermoacoustic Instabilities: Analysis and Experiment Mechanical Engineering 2001-12-18
Carter, Casey Joseph Aerodynamic Performance of a Flow Controlled Compressor Stator Using an Imbedded Ejector Pump. Mechanical Engineering 2001-02-21
Carullo, Jeffrey Stephen Effects of Freestream Turbulence, Turbulence Length Scale, and Reynolds Number on Turbine Blade Heat Transfer in a Transonic Cascade Mechanical Engineering 2006-12-14
Carvajal, Carlos The fluid-coupled motion of micro and nanoscale cantilevers Mechanical Engineering 2007-12-05
Carwile, Zachary Thomas Validation of a 3-D Virtual Acoustic Prototyping Method For Use In Structural Design Mechanical Engineering 2006-01-18
Cassino, Christopher Characterization and Development of General Material Models for use in Modeling Structures Bonded with Ductile Adhesives Mechanical Engineering 2005-05-05
Castellucci, Matt Resistive heating for self-healing materials based on ionomeric polymers. Mechanical Engineering 2009-07-07
Castiglone, Linda Ann Experimental investigation into the reduction of supersonic skin-friction drag on a flat plate using transpiration and a cavity with mass addition Mechanical Engineering 2009-08-22
Cavey, Ryan Hale Design and Development of a Squeeze-Mode Rheometer for Evaluating Magneto-Rheological Fluids Mechanical Engineering 2008-09-21
Chan, Brendan Juin-Yih Development of an Off-Road Capable Tire Model for Vehicle Dynamics Simulations Mechanical Engineering 2008-01-28
Chan, Chun Ngok Validation of CFD codes for propulsion system components Mechanical Engineering 2010-01-26
Chapman, David D. A Monte-Carlo-based simulation of jet exhaust nozzle thermal radiative signatures Mechanical Engineering 2009-10-06
Chardon, Sylvaine An experimental study of lifting and moving forces in air conveying systems Mechanical Engineering 2009-10-06
Charlton, Zachary Innovative Design Concepts for Insulated Joints Mechanical Engineering 2007-10-27
Charpentier, Arnaud Active Control Of Noise Radiated From Personal Computers Mechanical Engineering 2002-11-15
Chatterjee, Prateep A Computational Fluid Dynamics Investigation of Thermoacoustic Instabilities in Premixed Laminar and Turbulent Combustion Systems Mechanical Engineering 2004-07-14
Chaudry, Zaffir Ahmed Enhanced induced strain actuator performance through discrete attachment to structural elements Mechanical Engineering 2008-06-06
Chemistruck, Heather Michelle A Galerkin Approach to Define Measured Terrain Surfaces with Analytic Basis Vectors to Produce a Compact Representation Mechanical Engineering 2010-11-14
Chesnakas, Christopher J. Experimental studies in a supersonic through-flow fan blade cascade Mechanical Engineering 2005-10-12
Chesnakas, Christopher J Total velocity vector measurements in an axial-flow compressor using a 3-component Laser Doppler Anenometer Mechanical Engineering 2010-07-28
Chevrier, Vincent François Moisture transfer in porous materials exposed to combined humidity and temperature gradients Mechanical Engineering 2009-03-04
Chin, Philip Allen Sensor Networks: Studies on the Variance of Estimation, Improving Event/Anomaly Detection, and Sensor Reduction Techniques Using Probabilistic Models Mechanical Engineering 2012-06-18
Chishty, Wajid Ali Effects of Thermoacoustic Oscillations on Spray Combustion Dynamics with Implications for Lean Direct Injection Systems Mechanical Engineering 2005-06-20
Chiu, Ya-Tien Computational Fluid Dynamics Simulations of Hydraulic Energy Absorber Mechanical Engineering 1999-08-25
Chiu, Ya-tien A Performance Study of a Super-cruise Engine with Isothermal Combustion inside the Turbine Mechanical Engineering 2004-12-21
Chodak, Jillian Pyrolysis and Hydrodynamics of Fluidized Bed Media Mechanical Engineering 2010-05-17
Choi, JungHun Design and Development of a Minimally Invasive Endoscope: Highly Flexible Stem with Large Deflection and Stiffenable Exoskeleton Structure Mechanical Engineering 2006-02-16
Christiaen, Anne-Claire Evaluation of the durability of elastomeric easy-release coatings Mechanical Engineering 1998-07-16
Christophel, Jesse Reuben Comparison of the Thermal Performance of Several Tip Cooling Designs for a Turbine Blade Mechanical Engineering 2003-09-23
Christopher, Michael Donald Application of the Transient Hot-Wire Technique for Measurement of Effective Thermal Conductivity of Catalyzed Sodium Alanate for Hydrogen Storage Mechanical Engineering 2006-05-18
Chu, Teik Lin Effects of Mach Number and Flow Incidence on Aerodynamic Losses of Steam Turbine Blades Mechanical Engineering 1999-04-23
Clancy, Devin Static Tire Characterization for Race Vehicle Setup Mechanical Engineering 2011-11-21
Clark, Matthew Taylor The Stochastic Dynamics of an Array of Micron Scale Cantilevers in Viscous Fluid. Mechanical Engineering 2006-07-31
Clark, Robert L. Advanced sensing techniques for active structural acoustic control Mechanical Engineering 2007-05-22
Clark, William Walker Application of adaptive trusses to vibration isolation in flexible structures Mechanical Engineering 2008-07-28
Clark, Matthew Taylor The driven and stochastic dynamics of micro and nanoscale cantilevers in viscous fluid and near a solid boundary Mechanical Engineering 2008-10-31
Clark, Robert L A study of the large-scale structure in a supersonic slot injected flow field Mechanical Engineering 2010-06-22
Clark, William Walker A planar comparison of actuators for vibration control of flexible structures Mechanical Engineering 2010-06-22
Clark, Randy Raymond Modeling Two-Phase Flow in the Downcomer of a Once-Through Steam Generator using RELAP5/MOD2 Mechanical Engineering 2012-01-09
Clarke, George Edward Prediction of the running torque of instrument ball bearings at high speed under combined radial and axial loads. Mechanical Engineering 2010-06-02
Clatterbuck, Daniel C. An Investigation of Performance Limitations in Active Noise Reduction Headsets Mechanical Engineering 1998-04-27
Clem, Allen W An improved method for estimating the moderator temperature coefficient of pressurized water reactors using multivariate autoregression Mechanical Engineering 2009-04-07
Cobert, Matthew John Assessing Global Competence and Teamology for Collaborative Engineering Mechanical Engineering 2011-11-15
Coe, David Hazen Improving the Three Dimensional, Structural Velocity Field Reconstruction Process with Computer Vision Mechanical Engineering 1998-09-02
Coe, David H Skinning engineering models with non-uniform, hierarchical B-spline surfaces Mechanical Engineering 2009-09-05
Coffey, Katherine Leigh Next-Generation Earth Radiation Budget Instrument Concepts Mechanical Engineering 1998-11-04
Coffey, Bradley M. Identifiability and parameter estimation in rail vehicle dynamics Mechanical Engineering 2010-06-22
Colban IV, William Frederick Effects of Realistic Combustor Exit Profiles on a Turbine Vane Endwall Mechanical Engineering 2002-01-21
Colban IV, William F A Detailed Study of Fan-Shaped Film-Cooling for a Nozzle Guide Vane for an Industrial Gas Turbine Mechanical Engineering 2005-12-01
Colby, Ryan Stephen Considerations for the Development of Non-Visual Interfaces for Driving Applications Mechanical Engineering 2012-01-25
Cole, Daniel G. Harmonic and Narrowband Disturbance Rejection for Linear Time-Periodic Plants Mechanical Engineering 1998-10-05
Cole, Daniel G Design of, and initial experiments with, a MIMO plate control testbed Mechanical Engineering 2009-10-06
Collie, Jeffery C Unsteady shock wave effects on transonic turbine cascade performance Mechanical Engineering 2009-08-18
Collins, Christopher Michael Development of a Virtual Acoustic Showroom for Simulating Listening Environments and Audio Speakers Mechanical Engineering 2004-06-03
Collins, Robert James Design of a Helicopter Slung Vehicle for Actuated Payload Placement Mechanical Engineering 2012-04-24
Comas, Caroline Marie Assessment of the Measurement Repeatability and Sensitivity of a Noninvasive Blood Perfusion Measuring Probe Mechanical Engineering 2005-07-13
Comeau, Christian R Critical Erosion/Corrosion Piping Wall Thicknesses Under Static and Fatigue Stress Conditions According to ASME Guidelines Mechanical Engineering 2001-07-19
Conner, David C. Sensor Fusion, Navigation, and Control of Autonomous Vehicles Mechanical Engineering 2000-08-11
Conover, Mark Stuart Using Accelerometers to Quantify Infant General Movements as a Tool for Assessing Motility to Assist in Making a Diagnosis of Cerebral Palsy Mechanical Engineering 2003-09-23
Convery, Janet Leigh An Experimental Investigation of JP-7 and n-Heptane Extinction Limits in an Opposed Jet Burner Mechanical Engineering 2005-11-21
Cook, Allan B Application of neural networks to indirect monitoring of helicopter loads from flight variables Mechanical Engineering 2009-12-05
Coombe, H. Scott Development of a dynamic model of a mechanically driven polyphase AC generator Mechanical Engineering 2010-03-17
Coombs, Dana Joseph Design of User-Weight-based Exercise Machines Mechanical Engineering 1998-07-12
Cooper, Jared K Modeliing of a Small-Scale Remote Controllable Helicopter for Simulation and Control Development Mechanical Engineering 2006-04-06
Copenhaver, David C. Thermal characterization of honeycomb core sandwich structures Mechanical Engineering 2008-11-18
Corcoran, Joseph Michael Output-Only Experimental Modal Testing of Large Residential Structures and Acoustic Cavities Using Sonic Booms Mechanical Engineering 2010-02-23
Cordle, William H. Numerical inverse kinematics for a six-degree-of-freedom manipulator Mechanical Engineering 2009-12-05
Corey, Christopher A. Epicyclic Gear Train Solution Techniques with Application to Tandem Bicycling Mechanical Engineering 2003-12-16
Cormier, Joseph Michael Microstructural and Mechanical Properties of Human Ribs Mechanical Engineering 2003-04-25
Corner, Sebastien Marc William Screw-Fastened Cold-Formed Steel-to-Steel Shear Connection Behavior and Models Mechanical Engineering 2014-12-21
Couch, Michael Robert Pneumatic Particulate Collection System for an Unmanned Ground Sampling Robot Mechanical Engineering 2010-12-02
Couch, Eric L. Measurements of Cooling Effectiveness Along the Tip of a Turbine Blade Mechanical Engineering 2003-07-08
Couche, Jerome Christophe Active control of automobile cabin noise with conventional and advanced speakers Mechanical Engineering 1999-04-07
Cousins, William T. The Dynamics of Stall and Surge Behavior in Axial-Centrifugal Compressors Mechanical Engineering 1997-12-02
Couture, Scott A. CSADP, a classical control system analysis and design package Mechanical Engineering 2012-11-09
Cowan, Jonathan B Investigation of Erosion and Deposition of Sand Particles within a Pin Fin Array Mechanical Engineering 2009-12-04
Cramer, Kevin Brendan Design of a Total Pressure Distortion Generator for Aircraft Engine Testing Mechanical Engineering 2002-05-29
Craun, Matthew Ashby Identification of sound transmission paths within a hermetic reciprocating refrigeration compressor via multiple-input/single-output modeling Mechanical Engineering 2009-09-19
Creasy, Miles Austin Adaptive Collocated Feedback for Noise Absorption in Acoustic Enclosures Mechanical Engineering 2006-10-19
Creasy, Miles Austin Bilayer Network Modeling Mechanical Engineering 2011-08-22
Creel, Kenneth E A thermal analysis tool for three-dimensional models of multilayer microelectronics Mechanical Engineering 2010-05-04
Creel, Robert B A steam-load study of the Virginia Polytechnic Institute power plant Mechanical Engineering 2010-07-07
Cress, Ronald Turbine Blade Heat Transfer Measurements in a Transonic Flow Using Thin Film Gages Mechanical Engineering 2006-07-27
Crimm, Robert Prentiss Experimental apparatus for measuring moisture transfer in porous materials subject to relative humidity and temperature differences Mechanical Engineering 2010-01-12
Cross, Melissa A. Operation Characteristics of a Plasma Torch for Supersonic Combustion Applications with Simulated Cracked JP-7 Feedstock Mechanical Engineering 2004-06-08
Culhane, Andrew Alan Development of an Obstacle Detection System for Human Supervisory Control of a UAV in Urban Environments Mechanical Engineering 2007-12-12
Currier, Patrick N. Development of an Automotive Ground Vehicle Platform for Autonomous Urban Operations Mechanical Engineering 2008-05-08
Currier, Patrick Norman A Method for Modeling and Prediction of Ground Vehicle Dynamics and Stability in Autonomous Systems Mechanical Engineering 2011-05-10
Curtis, John Experimental Verification for Microwave Processing of Materials in a Single Mode Rectangular Resonant Cavity Mechanical Engineering 1999-08-18
D'Angelo, John Patrick Attenuation of Turbulent Boundary Layer Induced Interior Noise Using Integrated Smart Foam Elements Mechanical Engineering 2004-09-08
D'Angio, Paul Christopher Adaptive and Passive Non-Visual Driver Assistance Technologies for the Blind Driver Challenge® Mechanical Engineering 2012-05-07
Davidson, Jacob Daniel Actuation and Charge Transport Modeling of Ionic Liquid-Ionic Polymer Transducers Mechanical Engineering 2010-02-10
Davis, Mark William Development and Evaluation of a Test Apparatus for Fuel Cells Mechanical Engineering 2000-07-17
Davis, Ivan Christopher Damage Detection in Aluminum Cylinders Using Modal Analysis Mechanical Engineering 2002-08-03
Davis, Denny E Optimization of transducers for active structural acoustic control of complex structures using numerical techniques Mechanical Engineering 2009-01-17
Davis, John G An approximate method of calculating the weight of the two- insulation-two-coolant thermal protection system Mechanical Engineering 2010-07-28
de la Riva, Diego Horacio Modeling of Herschel/Quincke-Liner Systems for the Control of Aft Fan Radiation in Turbofan Engines Mechanical Engineering 2006-06-19
De Losier, Clayton Ray Effects of Manufacturing Deviations on Core Compressor Blade Performance Mechanical Engineering 2009-02-24
De Togni, Robert S The role of system dynamics on the behavior of elastomeric friction Mechanical Engineering 2009-10-10
DeBusk, Steven L. A microcomputer based Energy Monitoring and Reporting System for Virginia state facilities Mechanical Engineering 2010-06-22
DeCastro, Jonathan Anthony Design and Validation of a High-Bandwidth Fuel Injection System for Control of Combustion Instabilities Mechanical Engineering 2003-04-23
DeGuilio, Andrew Phillip A Comprehensive Experimental Evaluation of Actively Controlled Piezoceramics with Positive Posistion Feedback for Structural Damping Mechanical Engineering 2000-04-11
Del Barga, Christopher Design and Optimization of a Mobile Hybrid Electric System to Reduce Fuel Consumption Mechanical Engineering 2015-06-11
Delaney, Keegan Patrick Development of a One and Two-Dimensional Model for Calculating Pore Pressure in an Ablating Thermal Sacrificial Liner Mechanical Engineering 2007-05-03
DeLorenzo, Michael NUCARS Modeling of a Freight Locomotive with Steerable Trucks Mechanical Engineering 1998-07-13
Dempsey, Craig Thomas Design, fabrication, and calibration of an instrumented drop weight impact tester Mechanical Engineering 2009-10-06
Deneufve, Florence L Simultaneous active passive/control of extensional and flexural power flows in infinite thin beams Mechanical Engineering 2009-02-13
Denkins, Todd C. Design methodology to reduce the number of actuators in complex mechanisms Mechanical Engineering 2009-10-06
Derryberry, Rebekah Ann Artificial Anisotropy for Transverse Thermoelectric Heat Flux Sensing Mechanical Engineering 2007-04-18
Desrosiers, Kevin Campbell Evaluation of Novel and Low-Cost Materials for Bipolar Plates in PEM Fuel Cells Mechanical Engineering 2002-09-26
Detrich, Kahlil Electroding Methods for in situ Reverse Osmosis Sensors Mechanical Engineering 2010-02-11
Detweiler, Zachary Ray Techniques for using 3D Terrain Surface Measurements for Vehicular Simulations Mechanical Engineering 2009-05-01
Detwiler, Kevin P. Reduced fan noise radiation from a supersonic inlet Mechanical Engineering 2009-09-19
DeVlaminck, James Raymond Extracting the Rotational Degrees of Freedom From a Reconstructed Three-Dimensional Velocity Field Along With an Analytical Demonstraton and a Proposed Method for Experimental Verification Mechanical Engineering 2001-07-26
Deza Grados, Mirka Modeling the Hydrodynamics of a Fluidized Bed Mechanical Engineering 2012-04-06
Dhairyawan, Amit Internet Tools for Machine Design Mechanical Engineering 2002-12-30
Dhruna, Chetan J. Experimentally-Based Analytical Prediction of Structural Vibration Mechanical Engineering 1997-12-01
Dhulipala, Srinivas Thermohydrodynamic analysis of a two axial groove journal bearing including thermoelastic effects Mechanical Engineering 2010-06-08
Diehl, Gregory W. The effects of shaped piezoceramic actuators on the excitation of beams Mechanical Engineering 2009-09-29
Dillon, Travis Eric Feasibility of Assessing an Infant’s General Movements Using Wireless Accelerometers for Early Diagnosis of Neurological Dysfunction Mechanical Engineering 2005-06-30
Dilworth, John L. A critical study of various types of exhaust gas analyzers for gasoline engines Mechanical Engineering 2013-02-07
Ding, Chen Methodologies for active control of free shear flows Mechanical Engineering 2007-08-27
Dingus, Benjamin Ross Development of an Autonomous Unmanned Aerial Vehicle for Aerobiological Sampling Mechanical Engineering 2007-05-22
DiPietro, Anthony Louis Effects of temperature transients on the stall and stall recovery aerodynamics of a multi-stage axial flow compressor Mechanical Engineering 2007-10-05
Dixit, Shrikant Expert system for machinability data integrated with a CAD system Mechanical Engineering 2012-11-21
Doan, Andrew W. 3-D flow and performance of a rocket pump inducer at design and off-design flow rates Mechanical Engineering 2009-11-24
Dobarco-Otero, Jose Second-Surface Mirror Effects in Thin-Film Absorber Layers Mechanical Engineering 2000-09-11
Dodson, Jacob Christopher Guided Wave Structural Health Monitoring with Environmental Considerations Mechanical Engineering 2012-04-20
Dody, Joseph W. Study of biomass combustion characteristics for the development of a catalytic combustor/gasifier Mechanical Engineering 2012-06-10
Doebber, Ian Ross Investigation of Concrete Wall Systems for Reducing Heating and Cooling Requirements in Single Family Residences Mechanical Engineering 2004-10-26
Doktor, Christopher A Development of a statistical method for validating ESDM strain-field output Mechanical Engineering 2009-01-24
Dolan, James Patrick Use of Volumetric Heating to Improve Heat Transfer During Vial Freeze-Drying Mechanical Engineering 1998-06-30
Dolan, James P Microwave freeze-drying of aqueous solutions Mechanical Engineering 2009-12-05
Dolasa, Anaita Rustom Computer-Aided Design Software for the Undamped Two-Dimensional Static and Dynamic Analysis of Beams and Rotors Mechanical Engineering 1999-05-06
Dominic, Justin Experimental Study of Wall Shear Stress Modification by Surface Coating: Pressure Drop Measurements in a Rectangular Channel Mechanical Engineering 2011-06-10
Domme, Daniel Joseph Experimental and Analytical Characterization of a Transducer for Energy Harvesting Through Electromagnetic Induction Mechanical Engineering 2008-05-02
Donovan, Joseph Brian Three-dimensional vibrometry via three positions of a one-dimensional laser doppler velocimeter Mechanical Engineering 2009-08-14
Donovan, Francis Morgan Design and simulation of a torque sensing governor for an internal combustion engine Mechanical Engineering 2010-04-07
Doolittle, Stephen D. A radio-tracer study of the effect of surface finish on the transfer of polychlorotrifluoroethylene sliding on mild steel. Mechanical Engineering 2010-06-02
Dorton, David W. Experimental evaluation of effective friction coefficient for liquid ring seals Mechanical Engineering 2009-08-04
Doty, Mark C Laser doppler anemometer measurements of Reynolds stresses in a fully developed pipe flow Mechanical Engineering 2010-03-30
Doughty, Roger L. Effects of multiple incident shock waves on the flow in a transonic turbine cascade Mechanical Engineering 2008-06-06
Doughty, Roger L. The effect of blade solidity on the aerodynamic loss of a transonic turbine cascade Mechanical Engineering 2009-08-14
Douglas, Justin W Effects of Free Stream Turbulence on Compressor Cascade Performance Mechanical Engineering 2001-03-12
Dowden, Matthew Richard Barcroft Using Pressure Transducers for Noninvasive Heart and Respiratory Monitoring Mechanical Engineering 2012-07-27
Doyle, Matthew Edward The Foundation for CADSPAM: Computer Aided Design of SPAtial Mechanisms Mechanical Engineering 1997-12-02
Dress, Jason Michael Experimental Evaluation of JP-8-Based Fire Resistant Fuels Mechanical Engineering 2010-12-15
Drew, Christopher W. Mechanical Loading for Modifying Tissue Water Content and Optical Properties Mechanical Engineering 2009-05-13
Drew, Brady Patterson Entrainment Characteristics of Turbulent Round Gas Jets Submerged in Water Mechanical Engineering 2011-08-22
Du, Yu Internal Resonances in Vibration Isolators and Their Control Using Passive and Hybrid Dynamic Vibration Absorbers Mechanical Engineering 2003-05-02
Dubberley, Dennis John An analytical parameter study on the erosion of turbine blades subjected to flow containing particulates. Mechanical Engineering 2010-06-12
Duchez, Wilfried Role of electric field profiles in continuous microwave processing of thermal runaway materials Mechanical Engineering 2009-02-13
Dungan, Mary Elizabeth Development of a compact sound source for the active control of turbofan inlet noise Mechanical Engineering 2010-03-30
Duprey, Benjamin Lawrence Blake A New Fuzzy Based Stability Index Using Predictive Vehicle Modeling and GPS Data Mechanical Engineering 2009-05-14
Dye, Tracy Earl An experimental investigation of the behavior of Nitinol Mechanical Engineering 2005-10-07
Eades, Herbert H Thermal modeling of hybrid microelectronics Mechanical Engineering 2009-04-18
Eaton, Brandon Michael One Dimensional, Transient Model of Heat, Mass, and Charge Transfer in a Proton Exchange Membrane Mechanical Engineering 2001-05-15
Ebeling, Christopher P. Measurements and Predictions of the Heat Transfer at the Tube-Fin Junction for Louvered Fin Heat Exchangers Mechanical Engineering 2003-06-23
Eberhard, Robert William The design and construction of a free surface water table for the investigation of compressible-flow phenomena. Mechanical Engineering 2013-11-15
Eckstein, Adric Development of Robust Correlation Algorithms for Image Velocimetry using Advanced Filtering Mechanical Engineering 2007-12-20
Economy, A. Tommy A proposed methodology for the control of a semi-robotic convoy Mechanical Engineering 2009-12-05
Eddy, Grant Lee Study of Steady-State Wake Characteristics of Variable Angle Wedges Mechanical Engineering 2001-09-27
Edwards, Joseph Richard Equilibrium moisture content measurement for porous building materials at various temperatures Mechanical Engineering 2009-03-04
Eggborn, Timothy Analytical Models to Predict Power Harvesting with Piezoelectric Materials Mechanical Engineering 2003-05-19
Egger, Sean Robert A Turbo Approach to Distributed Acoustic Detection and Estimation Mechanical Engineering 2009-11-30
Einarsson, Magnus Ingi Quantifying Spatio-Temporal Chaos in Rayleigh Benard Convection Mechanical Engineering 2006-08-06
Eisemann, Kevin Michael A Computational Study of Compressor Inlet Boundary Conditions with Total Temperature Distortions Mechanical Engineering 2006-12-05
Eisenhower, Bryan A. Identification of Thermoacoustic Dynamics Exhibiting Limit Cycle Behavior Mechanical Engineering 2000-05-22
El-Aouar, Walid Hassib Finite Element Analysis Based Modeling of Magneto Rheological Dampers Mechanical Engineering 2002-09-24
El-Badawy, Ayman Aly Structural Identification and Buffet Alleviation of Twin-Tailed Fighter Aircraft Mechanical Engineering 2000-04-11
Elahinia, Mohammad Effect of System Dynamics on Shape Memory Alloy Behavior and Control Mechanical Engineering 2004-08-09
Elder, Erin N. Internal Heat Transfer and External Effectiveness Measurements for a Novel Turbine Blade Cooling Design Mechanical Engineering 2005-05-10
Ellis, Roger L. Ballistic Impact Resistance of Graphite Epoxy Composites With Shape Memory Alloy and Extended Chain Polyethylene Spectra Hybrid Components Mechanical Engineering 1998-07-13
Ellis, Graham K. H[infinity] and LQG optimal control for the rejection of persistent disturbances : analysis, design and experiment Mechanical Engineering 2006-02-01
Ellis, John Wesley Microcomputer control of a three-dimensional stereoflouroscope. Mechanical Engineering 2010-06-12
Ellis, Brent Earl Assessment of the Repeatability and Sensitivity of the Thermoelectric Perfusion Probe Mechanical Engineering 2006-12-20
Elward, Kevin M. Shock formation in overexpanded flow :a study using the hydraulic analogy Mechanical Engineering 2012-11-21
Elyyan, Mohammad Ahmad Heat Transfer Augmentation Surfaces Using Modified Dimples/Protrusions Mechanical Engineering 2008-12-18
Emmons, Shawn Glendon Characterizing a Racing Damper’s Frequency Dependent Behavior with an Emphasis on High Frequency Inputs Mechanical Engineering 2007-04-16
England, Jonas Andrew Numerical Modeling and Prediction of Bubbling Fluidized Beds Mechanical Engineering 2011-05-02
English, Craig Alan Development and Characterization of a Synchronously Actuated Response Atomizer for Studying Thermoacoustic Instabilities Mechanical Engineering 2012-05-01
Errasquin, Leonardo Airfoil Self-Noise Prediction Using Neural Networks for Wind Turbines Mechanical Engineering 2009-09-25
Esteban, Jaime Analysis of the sensing region of a PZT actuator-sensor Mechanical Engineering 2008-06-06
Estep, Robert Noah Examination of the application and limitations of structural mode extraction via force apportionment Mechanical Engineering 2009-02-13
Estve, Simon J. Control of sound transmission into payload fairings using distributed vibration absorbers and Helmholtz resonators Mechanical Engineering 2004-05-17
Evans, John P Experimental Evaluation of the Effect of Inlet Gas Humidification on Fuel Cell Performance Mechanical Engineering 2003-09-30
Evans, Richard Blaine Modeling and Testing of a Micro-Tubular Low-Temperature Fuel Cell for use in a Micro Air Vehicle Mechanical Engineering 2007-12-31
Ewens, David S. The transport and remote oxidation of compartment fire exhaust gases Mechanical Engineering 2009-12-04
Ewing, Jerrod Albert Development of a Direct-Measurement Thin-Film Heat Flux Array Mechanical Engineering 2007-01-12
Excoffon, Tony 3-D flow and performance of a tandem-bladed rocket pump inducer Mechanical Engineering 2010-05-04
Ezanno, Philippe Vibration localization and statistical energy analysis in coupled systems Mechanical Engineering 2009-06-11
Fagan, Gary T. An experimental investigation into active damage control systems using positive position feedback for AVC Mechanical Engineering 2010-05-11
Fair, Chad Synchronous Sampling Sideband Orders from Helical Planetary Gear Sets Mechanical Engineering 1998-08-03
Faison, Inga L. The Effect of Ozone on Diesel Soot Precursors Mechanical Engineering 1998-07-13
Fallon, J. Barry Improving the kinematic control of robots with computer vision Mechanical Engineering 2008-06-06
Fannin, Christopher A. Design of an Analog Adaptive Piezoelectric Sensoriactuator Mechanical Engineering 1997-02-26
Fannin, Christopher A. Linear Modeling and Analysis of Thermoacoustic Instabilities in a Gas Turbine Combustor. Mechanical Engineering 2000-07-26
Fanto, Peter Louis Automatic Positioning and Design of a Variable Baseline Stereo Boom Mechanical Engineering 2012-07-25
Farina, Jordan Thomas Conversion of a Gas Turbine Engine to Operate on Lean-Premixed Hydrogen-Air: Design and Characterization Mechanical Engineering 2010-01-29
Farinholt, Kevin Modal and Impedance Modeling of a Conical Bore for Control Applications Mechanical Engineering 2001-11-01
Farinholt, Kevin M. Modeling and characterization of ionic polymer transducers for sensing and actuation Mechanical Engineering 2005-11-23
Farjoud, Alireza Physics-based Modeling Techniques for Analysis and Design of Advanced Suspension Systems with Experimental Validation Mechanical Engineering 2011-01-26
Farmer, Justin Ryan A comparison of power harvesting techniques and related energy storage issues Mechanical Engineering 2007-05-21
Farmer, Jesse Lee Kinematic Analysis Of A Two Body Articulated Robotic Vehicle Mechanical Engineering 2008-05-12
Faruque, Ruel Rassan A JAUS Toolkit for LabVIEW, and a Series of Implementation Case Studies with Recommendations to the SAE AS-4 Standards Committee Mechanical Engineering 2007-01-14
Faucher, Florent Patrice A Numerical Model of a Microwave Heated Fluidized Bed Mechanical Engineering 1998-12-16
Feng, Jinwei Active Flow Control For Reduction of Unsteady Stator-Rotor Interaction In a Turbofan Simulator Mechanical Engineering 2000-10-18
Feng, Ming-Fa Fault diagnosis and prediction in reciprocating air compressors by quantifying operating parameters Mechanical Engineering 2005-10-12
Ferrar, Anthony Maurice Measurements of Flow in Boundary Layer Ingesting Serpentine Inlets Mechanical Engineering 2011-12-22
Filip, Ethan Lee Evaluation and Application of Thermal Modeling for High Power Motor Improvements Mechanical Engineering 2010-12-14
Finefield, John K. Investigation of combined feedback and adaptive control of cylinder vibrations Mechanical Engineering 2009-10-06
Finkbeiner, David L. Calculation of gas-wall heat transfer from pressure and volume data for spaces with inflow and outflow Mechanical Engineering 2009-12-04
Fischer, Patrick Numerical Simulation of Microwave Sintering of Zinc Oxide Mechanical Engineering 1998-07-13
Fitzgerald, Shawn A pneumatic conveying powder delivery system for continuously heterogeneous material deposition in solid freeform fabrication Mechanical Engineering 2008-12-02
Fleming, Michael Ryals Teleoperated Control of Hydraulic Equipment for Hazardous Material Handling Mechanical Engineering 2004-01-04
Fleming, Mark Richard An experimental investigation of the harmonic excitation of simply supported plates with multiple surface-bonded piezoceramic actuators Mechanical Engineering 2009-06-08
Fleming, Steven The enhancement of PHIGS plus B-spline functionality for geometric modeling in CAD Mechanical Engineering 2010-01-12
Fletcher, J. Robert The development of an instrument to control the oxygen concentration and flow rate of an air-oxygen mixture. Mechanical Engineering 2010-07-21
Flint, Eric Michael Electro-dynamic analysis of stack actuators and active members integrated within truss structures Mechanical Engineering 2009-12-04
Fogle, Emily Johanna Compression Failure of Aluminum Plates Exposed to Constant Heat Flux Mechanical Engineering 2010-05-19
Fong, Nga Hin Benjamin A comparison study of genetic algorithms in feedback controller design Mechanical Engineering 2009-12-04
Foo, Ser Jee Theoretical study of heat distribution and surface temperatures generated in oscillating contact Mechanical Engineering 2009-06-11
Forrester, Merville Kenneth Stiffness Model of a Die Spring Mechanical Engineering 2002-05-06
Foss, David T. Development and modeling of a dual-frequency microwave burn rate measurement system for solid rocket propellant Mechanical Engineering 2012-11-21
Fowler, Leslie Paige Application of the Filtered-X LMS Algorithm for Disturbance Rejection in Time-Periodic Systems Mechanical Engineering 1998-07-13
Fox, Jason William Electromechanical Characterization of the Static and Dynamic Response of Dielectric Elastomer Membranes Mechanical Engineering 2007-09-03
Fox, Christopher James Investigation of Shorting by Penetration in Pem Fuel Cell Membranes Mechanical Engineering 2009-02-23
Fox, Derek Martin Design of a Portable Tire Test Rig and Vehicle Roll-Over Stability Control Mechanical Engineering 2009-12-21
Frampton, Kenneth D. Active control of acoustic radiation due to discontinuities on thin beams Mechanical Engineering 2009-09-05
Franklin, John Wesley Electromechanical Modeling of Encapsulated Ionic Polymer Transducers Mechanical Engineering 2003-05-28
Fratello, John David Multi-body Dynamics Simulation and Analysis of Wave-adaptive Modular Vessels Mechanical Engineering 2011-05-22
Freeman, Mark E. Friction, wear and lubrication of a poly(2-hydroxyethyl methacrylate) hydrogel Mechanical Engineering 2008-09-18
Frentzel, Jonathan Michael Relative Accuracy and Precision of Differentially Corrected GPS on a Moving Vehicle Mechanical Engineering 2005-08-27
Friant, Charles William Determination of the burning rate of small diameter aluminum wire. Mechanical Engineering 2010-02-16
Fronk, Thomas Harris Fully-coupled fluid-structure analysis of a baffled rectangular orthotropic plate using the boundary element and finite element methods Mechanical Engineering 2008-07-28
Fronk, Thomas Harris Nonlinear finite element analysis of a laminated composite plate with nonuniform transient thermal loading Mechanical Engineering 2010-07-08
Fulakis, Chris A theoretical analysis of combined melting and vaporization using the boundary element method Mechanical Engineering 2009-09-05
Fuller, Russell M. Neural network estimation of disturbance growth and flow field structure of spatially excited jets Mechanical Engineering 2008-09-18
Gabruk, Robert S. The characterization of the flowfield of a dump combustor Mechanical Engineering 2009-05-09
Gailliot, John A. Computational study of hub corner stall in an axial compressor rotor Mechanical Engineering 2009-03-03
Gaines, Jonathan Elliot Remote Operator Blended Intelligence System for Environmental Navigation and Discernment (RobiSEND) Mechanical Engineering 2011-09-19
Galaitsis, George Stergios Extraction of drilling-angular velocities using a nodal-spatial array of in-plane translational velocities Mechanical Engineering 2010-05-04
Gallimore, Scott Douglas A Study of Plasma Ignition Enhancement for Aeroramp Injectors in Supersonic Combustion Applications Mechanical Engineering 2001-04-19
Gallimore, Scott D. Operation of a High-Pressure Uncooled Plasma Torch with Hydrocarbon Feedstocks Mechanical Engineering 1998-07-30
Gallimore, Craig Allen Passive Viscoelastic Constrained Layer Damping Application for a Small Aircraft Landing Gear System Mechanical Engineering 2008-10-10
Gandhi, Ashit R. A CAD/CAM interface for computer-aided design of cams Mechanical Engineering 2013-03-12
Ganino, Anthony Joseph Mechanical design of the Carpal wrist :a parallel-actuated, singularity-free robotic wrist Mechanical Engineering 2008-08-29
Gantt, Lynn Rupert Energy Losses for Propelling and Braking Conditions of an Electric Vehicle Mechanical Engineering 2011-05-16
Gantz, Kevin Francis Fabrication of Three-Dimensionally Independent Microchannels Using a Single Mask Aimed at On-Chip Microprocessor Cooling Mechanical Engineering 2007-11-30
Gao, Rui Computational Fluid Dynamic and Rotordynamic Study on the Labyrinth Seal Mechanical Engineering 2012-06-26
Garcia, Sandrine Experimental Design Optimization And thermophysical Parameter Estimation of Composite Materials using Genetic Algorithms Mechanical Engineering 1999-06-18
Garcia, Sandrine L. Analysis of a space experimental design for high-Tc superconductive thermal bridges Mechanical Engineering 2010-05-19
Garcia, Robert Gordon CFD simulation of flow fields associated with high speed jet impingement on deflectors Mechanical Engineering 2007-04-10
Gardner, Donald Anderson Experimental Testing of a Decentralized Model Reference Adaptive Controller for a Mobile Robot Mechanical Engineering 2001-07-24
Garg, Anil Kumar Design, installation and testing of a bioremediation-based system for treating regulated medical waste Mechanical Engineering 2009-11-24
Garguilo, Keith Francis Design and testing of a nonlinear mechanical advantage demonstration mechanism Mechanical Engineering 2009-03-24
Garrison, Kevin Lee Design, Fabrication, and Validation of Membrane-Based Sensors Mechanical Engineering 2012-06-12
Gassaway, Jason Cannon Local Bundling of Disparity Maps for Improved Dense 3D Visual Reconstruction Mechanical Engineering 2011-07-20
Gauden, William H. Performance and stalling behavior of an axial-flow compressor subjected to three circumferential inlet distortion levels. Mechanical Engineering 2010-07-28
Gautam, Ashwini Design and development of advanced vibration and noise control devices using finite element analysis Mechanical Engineering 2006-01-05
Gayzik, Francis Scott Optimal Control of Thermal Damage to Biological Materials Mechanical Engineering 2004-09-17
Genevey, Daniel Bruno Transient Model of Heat,Mass,and Charge transfer as well as Electrochemistry in the Cathode Catalyst Layer of a PEMFC Mechanical Engineering 2001-12-19
Gentry-Grace, Cassandra Ann A Study of Smart Foam for Noise Control Applications Mechanical Engineering 1998-10-22
Georgopoulos, Nikolaos Application of a Decomposition Strategy to the Optimal Synthesis/Design and Operation of a Fuel Cell Based Total Energy System Mechanical Engineering 2002-05-03
Gibbs, Gary P. Simultaneous active control of flexural and extension power flow in thin beams Mechanical Engineering 2005-10-26
Gifford, Andrew R The Physical Mechanism of Heat Transfer Augmentation in Stagnating Flows Subject to Freestream Turbulence and Related Studies Mechanical Engineering 2009-02-02
Gilbert, Gregory S. Scaling a Prismatic Revolute Joint (Pr) Manipulator Using Similitude and Buckingham Pi Techniques Mechanical Engineering 1998-03-17
Gillett, Philip Winslow Head Mounted Microphone Arrays Mechanical Engineering 2009-09-04
Gilliam, David R. A study of contact between a profile meter stylus and polymer films on roughened substrates Mechanical Engineering 2013-11-15
Gjerazi, Agron Design of a Wolfhard-Parker burner and setup of the experimental conditions for the study of soot formation in dual-mode diffusion flames Mechanical Engineering 2010-02-02
Glass, Jeffrey Lewis Experimental Evaluation of a Trailing-Arm Suspension for Heavy Trucks Mechanical Engineering 2001-05-15
Gloudemans, James R. Filleting of aircraft components using non-uniform B-spline surfaces Mechanical Engineering 2012-09-08
Gokhale, Ashutosh V. A numerical study of cylindrical electric furnace performance using the finite element method Mechanical Engineering 2008-08-29
Gokhale, Dipen P. Kinematic analysis and animation of a variable geometry truss robot Mechanical Engineering 2012-11-14
Golan, Lawrence P. Thermal analysis of sliding contact systems using the boundary element method Mechanical Engineering 2009-11-24
Gold, Brent Andrew Performance Analysis Of Active and Passive Multi-Array Sonar Networks Mechanical Engineering 2007-12-19
Goldman, Gabriel Jacob Design Space and Motion Development for a Pole Climbing Serpentine Robot Featuring Actuated Universal Joints Mechanical Engineering 2009-03-27
Goldstein, Andre L. Control of Sound Transmission with Active-Passive Tiles Mechanical Engineering 2006-05-29
Gombar, Brett Anthony Design and Evaluation of a Mobile Instrumentation Platform for Unmanned Vehicle Testing Mechanical Engineering 2006-05-22
Goncalves, Fernando D. Dynamic Analysis of Semi-Active Control Techniques for Vehicle Applications Mechanical Engineering 2001-08-14
Goncalves, Fernando D. Characterizing the Behavior of Magnetorheological Fluids at High Velocities and High Shear Rates Mechanical Engineering 2005-02-07
Gonidou, Luc-Olivier Active control of flexural power flow in elastic thin beams Mechanical Engineering 2009-09-05
Good, Matthew G Development of a Variable Camber Compliant Aircraft Tail using Structural Optimization Mechanical Engineering 2004-07-12
Goode, Brian Joseph A State Space Partitioning Scheme for Vehicle Control in Pursuit-Evasion Scenarios Mechanical Engineering 2011-10-28
Goodrich, Thomas William Thermophysical Properties and Microstructural Changes of Composite Materials at Elevated Temperature Mechanical Engineering 2009-12-01
Goodson, Craig Carl Simulation of Microwave Heating of Mullite Rods Mechanical Engineering 1997-12-11
Gopalalkrishnan, Pradeep Unsteady Aerodynamic and Aeroelastic Analysis of Flapping Flight Mechanical Engineering 2008-12-18
Gopinath, Sudhir Using Color and Shape Analysis for Boundary Line Extraction in Autonomous Vehicle Applications Mechanical Engineering 2003-09-11
Gordon, Ashley Rebecca Evaluation of TiO2 as a Pt-Catalyst Support in a Direct Ethanol Fuel Cell Mechanical Engineering 2012-03-19
Gorrell, Steven Ernest An experimental study of exit flow patterns in a multistage compressor in rotating stall Mechanical Engineering 2009-06-10
Gothing, Grant Edward Development of the "Discretized Dynamic Expanding Zones with Memory" Autonomous Mobility Algorithm for the Nemesis Tracked Vehicle Platform Mechanical Engineering 2007-08-07
Gottuk, Daniel The generation of carbon monoxide in compartment fires Mechanical Engineering 2008-06-06
Gratton, Andrew Robert Measurements and Predictions of Heat Transfer for a First Vane Design Mechanical Engineering 2004-01-08
Gravatt, John Wilie Magneto-Rheological Dampers for Super-sport Motorcycle Applications Mechanical Engineering 2003-05-20
Gray, Sandria Lutrica Turbulence Modulation of Polydisperse Particles in a Square Particle-Laden Jet: Numerical Investigation Mechanical Engineering 2012-06-05
Green, Kimball W. Piezoceramic Actuated Transducers for Interior Acoustic Noise Control Mechanical Engineering 2000-08-15
Greenwood, Aaron Blake Implementation of Adaptive Filter Algorithms for the Suppression of Thermoacoustic Instabilities Mechanical Engineering 2003-02-21
Grieshaber, Michele Marie A computer-aided software engineering toolkit for the integration of CAD/CAM application software in a network environment Mechanical Engineering 2007-05-22
Grieshaber, Michele Marie Interactive calculation of cross-sectional areas for aircraft design and analysis Mechanical Engineering 2010-04-27
Griffin, Timothy R. Computer-Aided Design Software for Torsional Analysis Mechanical Engineering 1998-03-05
Griffin, Jason Robert The Control of Interior Cabin Noise Due to a Turbulent Boundary Layer Noise Excitation Using Smart Foam Elements Mechanical Engineering 2006-05-15
Griffith, Dwaine O. Turbulence measurements and noise generation in a transonic cryogenic wind tunnel Mechanical Engineering 2012-11-21
Griffiths, David John Development of Ionic Polymer Metallic Composites as sensors Mechanical Engineering 2008-11-12
Grinus, William The suitability of Virginia coals for underfeed stoker equipped plants Mechanical Engineering 2010-07-07
Grisso, Benjamin Luke Considerations of the Impedance Method, Wave Propagation, and Wireless Systems for Structural Health Monitoring Mechanical Engineering 2004-09-14
Grisso, Benjamin Luke Advancing Autonomous Structural Health Monitoring Mechanical Engineering 2007-12-06
Grohs, Joshua Walter Comparing In Situ and Bulk Constitutive Properties of a Structural Adhesive Mechanical Engineering 2007-08-07
Grose, Michael David A system identification technique for predicting transient operation of gas turbine engines Mechanical Engineering 2008-08-29
Groth, Kevin M Nonlinear Lumped-Parameter Model of the Lumbar Intervertebral Disc: A Study on Viscoelastic Deformation and Three-Dimensional Modeling of the Spine Mechanical Engineering 2007-08-02
Grove, Donald E The Vertical Integration of Mechatronics at Virginia Tech Mechanical Engineering 2001-03-27
Gu, Yi Active control of sound radiation from fluid loaded plates Mechanical Engineering 2005-10-14
Guevara, Carlos Ernesto An Environmental Monitoring Device to Identify Potential Risks for Intraventricular Hemorrhage During Neonatal Transport of Preterm Infants Mechanical Engineering 2011-11-18
Guigou, Catherine R. J. Active control of sound radiation due to subsonic wave scattering from discontinuities on thin elastic beams Mechanical Engineering 2008-06-06
Gunes, Mehmet Burak Investigation of a Fuel Cell Based Total Energy System for Residential Applications Mechanical Engineering 2001-05-03
Guo, Zenglin Morton Effect Induced Instability in Mid-Span Rotor–Hydrodynamic Bearing Systems Mechanical Engineering 2011-05-31
Gupta, Ajay K. Development of a new shock capturing formula for pressure correction methods Mechanical Engineering 2008-12-17
Gupta, Sanjeev Higher order approximation for combined mode heat transfer in building insulations Mechanical Engineering 2010-07-15
Gurski, Stephen Daniel Cold-start effects on performance and efficiency for vehicle fuel cell systems Mechanical Engineering 2002-12-19
Gustafson, Eric Andrew Design, Simulation, and Wind Tunnel Veri cation of a Morphing Airfoil Mechanical Engineering 2011-06-20
Gutierrez, Mauricio F. Masonry heater performance evaluation :efficiency, emissions, and thermal modeling Mechanical Engineering 2009-10-06
Guy, Ashley Ray Effect of Blowing Ratio on the Nusselt Number and Film Cooling Effectiveness Distributions of a Showerhead Film Cooled Blade in a Transonic Cascade Mechanical Engineering 2007-07-20
Guynn, Jerome Hamilton Estimation of thermal properties in a medium with conduction and radiation heat transfer Mechanical Engineering 2008-08-29
Gvozdich, Grant Gregory Modeling the Transient Effects of High Energy Subsystems on High-Performance Aerospace Systems Mechanical Engineering 2011-11-14
Haber, Ludwig Christian An investigation into the origin, measurement and application of chemiluminescent light emissions from premixed flames Mechanical Engineering 2001-03-14
Haber, Ludwig Christian Investigation of Dynamics in Turbulent Swirling Flows Aided by Linear Stability Analysis Mechanical Engineering 2003-10-28
Haeffelin, Martial P. A. A Study of Earth Radiation Budget Radiometric Channel Performance and Data Interpretation Protocols Mechanical Engineering 1998-07-13
Haeffelin, Martial A numerical study of equivalence in scanning thermistor bolometer radiometers for earth radiation budget applications Mechanical Engineering 2008-12-30
Hager, Jonathan M. Development and calibration of a heat flux microsensor Mechanical Engineering 2012-09-08
Haines, Raymond G The possibility of increasing compression ratios by using water as an anti-detonant Mechanical Engineering 2010-07-07
Halasz, Christopher Advanced Trailing Edge Blowing Concepts for Fan Noise Control: Experimental Validation Mechanical Engineering 2005-07-17
Hale, Brian D. Stress Estimation Using Clock Spring Modeling Techniques in Twist Capsule Design Mechanical Engineering 1998-08-07
Hale, Alan A. A three-dimensional turbine engine analysis compressor code (TEACC) for steady-state inlet distortion Mechanical Engineering 2008-06-06
Hale, Jamie Harold Effects of stationary wake on turbine blade heat transfer in a transonic cascade Mechanical Engineering 2008-08-22
Hallez, Raphael F Investigation of the Herschel-Quincke Tube Concept as a Noise Control Device for Turbofan Engines Mechanical Engineering 2001-01-31
Halsey, Andrew C. The effect of a DC voltage on the catalytic combustion of natural gas in air over platinum Mechanical Engineering 2008-10-02
Hambric, Stephen A. Structural shape optimization of three dimensional finite element models Mechanical Engineering 2012-11-17
Hamby, David William Breakdown characteristics of nonuniform electric fields in crossflows Mechanical Engineering 2008-12-17
Hamilton, Joseph Marshall Design and implementation of vibration data acquisition in Goodwin Hall for structural health monitoring, human motion, and energy harvesting research Mechanical Engineering 2015-05-12
Hammock, Thomas V. Development of a [i.e. an] engineering design procedure for a complex revolute joint Mechanical Engineering 2012-11-29
Han, Man-Cheol Improved approaches to the indirect force determination problems via experimental modal analysis Mechanical Engineering 2005-09-20
Han, Jea-Kweon Bipedal Walking for a Full Size Humanoid Robot Utilizing Sinusoidal Feet Trajectories and Its Energy Consumption Mechanical Engineering 2012-05-04
Hanak, Joseph P. Experimental verification of optimal experimental designs for the estimation of thermal properties of composite materials Mechanical Engineering 2009-01-31
Hanchi, Jorge Fundamental aspects of the tribological behavior of poly(ether-ether-ketone)-based in-situ composites at elevated temperatures Mechanical Engineering 2009-03-04
Hansen, Gail Ann Upper Extremity Interaction with a Helicopter Side Airbag: Injury Criteria for Dynamic Hyperextension of the Female Elbow Joint Mechanical Engineering 2004-05-05
Hanuska, Alexander Robert Thermal Characterization of Complex Aerospace Structures Mechanical Engineering 1998-04-16
Hardman, Robert R. Infrared imaging :a proposed validation technique for computational fluid dynamics codes used in STOVL applications Mechanical Engineering 2009-05-02
Harne, Ryan Novel Lightweight Noise and Vibration Control Treatments for Marine Structures Mechanical Engineering 2009-08-18
Harne, Ryan Lee The study and development of distributed devices for concurrent vibration attenuation and energy harvesting Mechanical Engineering 2012-01-27
Harper, David Keneda Boundary Layer Control and Wall-Pressure Fluctuations in a Serpentine Inlet Mechanical Engineering 2000-05-16
Harrell, Greg S. Testing and modeling of a two-phase ejector Mechanical Engineering 2007-08-08
Harris, Anthony Frederick Multi-Degree of Freedom Passive and Active Vibration Absorbers for the Control of Structural Vibration Mechanical Engineering 2004-01-15
Harris, Jr., Charles Richard Investigation of Control Effectors for Ducted Fan VTOL UAVs Mechanical Engineering 2007-08-02
Hasan, Shahab An object-oriented, PHIGS-based Internal Layout Module for aircraft design Mechanical Engineering 2009-03-03
Hashemi, Nastaran Exploring the Nonlinear Dynamics of Tapping Mode Atomic Force Microscopy with Capillary Layer Interactions Mechanical Engineering 2008-06-24
Hatchett, John Henry An Investigation of Effectiveness of Normal and Angled Slot Film Cooling in a Transonic Wind Tunnel Mechanical Engineering 2008-02-23
Hawkins, L. E. Analysis of vertical channel flow and heat transfer using the finite-element method Mechanical Engineering 2008-08-25
Hayes, Thomas J. The Creative Entrepreneurs Organization: Developing Innovative Products and Businesses Mechanical Engineering 1997-12-04
Haynie, Charles Dean Development of a Novel Zero-Turn-Radius Autonomous Vehicle Mechanical Engineering 1998-08-05
Hays, Joseph T Parametric Optimal Design Of Uncertain Dynamical Systems Mechanical Engineering 2011-09-01
He, Xingxi Monte Carlo simulation of ion transport of high strain ionomeric polymer transducers Mechanical Engineering 2008-01-29
Heaston, Jeremy Rex Design of a Novel Tripedal Locomotion Robot and Simulation of a Dynamic Gait for a Single Step Mechanical Engineering 2006-08-02
Heckel, Scott P. Reynolds stress measurements in a turbine tip leakage vortex Mechanical Engineering 2009-10-10
Heffernan, Michael J. Evaluation of aged woodstove catalysts Mechanical Engineering 2009-03-04
Hegewald, Thomas Vibration Suppression Using Smart Materials in the Presence of Temperature Changes Mechanical Engineering 2000-05-01
Heilmann, John A dual reaction-mass dynamic vibration absorber for active vibration control Mechanical Engineering 2008-09-18
Henderson, Kenneth Reed Evaluation of the Effect of Microporous Sublayer Design and Fabrication on Performance and Adhesion in PEM Fuel Cell Assemblies Mechanical Engineering 2005-10-10
Hendricks, Adam Gerald Determination of Flame Dynamics for Unsteady Combustion Systems using Tunable Diode Laser Absorption Spectroscopy Mechanical Engineering 2003-12-19
Hendricks, David Gerard The experimental determination of rotor blade dynamic bending moments of a 10-kw wind turbine Mechanical Engineering 2009-04-18
Hennage, John B. Characterization of a Pressure Sensitive Adhesive (PSA) for Mechanical Design Mechanical Engineering 2004-11-02
Henry, Gregory S. A study of tip-leakage flow through orifice investigations Mechanical Engineering 2012-11-17
Henshaw, Graham Robert Single-Session Design: Design Methodology in Compressed Timeframes Derived from the Robot Rivals Television Series Mechanical Engineering 2003-05-05
Hereford, Don Keith Selection of a noncondensing, single automatic extraction turbo-generator for the Virginia Polytechnic Institute heating and power plant Mechanical Engineering 2012-06-10
Herold, John Henry Roll vibration of a reciprocating air compressor Mechanical Engineering 2010-07-28
Herr, John D. Determining the moderator temperature coefficient in a PWR Mechanical Engineering 2006-05-11
Herrmann, Christine Estimating Joint Torques on a Biodex System 3 Dynamometer Mechanical Engineering 2005-07-05
Hibshman, Randolph Joell An Experimental Study of Soot Formation in Dual Mode Laminar Wolfhard-Parker Flames Mechanical Engineering 1998-04-09
Hill, Jonathan A design procedure for model reference adaptive control Mechanical Engineering 2009-02-13
Hill, Hugh Edward 2D CFD Simulation of a Circulation Control Inlet Guide Vane Mechanical Engineering 2007-01-19
Hills, Zachary Patrick Using Macro-Fiber Composite Actuators for Aquatic Locomotion Mechanical Engineering 2010-06-01
Hines, Anne Michelle Characteristics of Active Combustion Control for Liquid-Fuel Systems with Proportional Primary Fuel Modulation Mechanical Engineering 2005-05-11
Hite, Gregory Charles The vibration of instrument ball bearings in a controlled environment and the effect of the resulting fretting corrosion on bearing torque. Mechanical Engineering 2010-07-08
Ho, Hung-Ta Some problems in the axially symmetrical bending of a thick circular plate resting on an elastic foundation Mechanical Engineering 2010-04-26
Hoffie, Andreas Frank Convection Calibration of Schmidt-Boelter Heat Flux Gages in Shear and Stagnation Air Flow Mechanical Engineering 2007-03-06
Hoglund, James R. An expert system for off-line analysis of rotating equipment Mechanical Engineering 2012-11-29
Hohlfeld, Erik Max Film Cooling Predictions Along the Tip and Platform of a Turbine Blade Mechanical Engineering 2003-05-19
Holden, Daniel Patrick Flying snakes: Aerodynamics of body cross-sectional shape Mechanical Engineering 2011-05-17
Holland, Michael L. Assembly Optimization for Double Row Ball Bearings Mechanical Engineering 1998-08-24
Holland, Chase Carlton Computational Methods for Estimating Rail Life Mechanical Engineering 2012-03-05
Holley, Troy Nigel Empirical Analysis of Pneumatic Tire Friction on Ice Mechanical Engineering 2010-09-28
Holmberg, David G. A frequency domain analysis of surface heat transfer/free-stream turbulence interactions in a transonic turbine cascade Mechanical Engineering 2008-06-06
Holzinger, Felix Development of a Concept for Forced Response Investigations Mechanical Engineering 2009-12-03
Homitz, Joseph A Lean-Premixed Hydrogen Injector with Vane Driven Swirl for Application in Gas Turbines Mechanical Engineering 2006-12-20
Homma, Kenji Compact Integrated Active-Passive Approach for Axial Fan Noise Control Mechanical Engineering 2004-09-23
Hongprapas, Sorarat Preliminary experiment and analysis of supersonic inlet buzz Mechanical Engineering 2009-01-31
Hopkins, Brad Michael Adaptive Rollover Control Algorithm Based on an Off-Road Tire Model Mechanical Engineering 2009-12-14
Hopkins, Brad Michael A Wavelet-Based Rail Surface Defect Prediction and Detection Algorithm Mechanical Engineering 2012-04-07
Hopkinson, David P. Measurements and Modeling of the Failure Pressure of Bilayer Lipid Membranes Mechanical Engineering 2007-12-12
Hoppe, Elizabeth Anne Improving Signal Clarity through Interference Suppression and Emergent Signal Detection Mechanical Engineering 2009-09-10
Horn, Thomas J. Comparison of heat flux standards for calibrating heat flux gages at elevated temperatures and high heat flux levels Mechanical Engineering 2009-06-16
Horner, Anne Design of a decentralized model reference adaptive controller for a mobile robot Mechanical Engineering 2008-11-07
Horvath, Istvan Development of a cantilever beam, capacitive sensing, skin friction gage and suppporting instrumentation for measurements Mechanical Engineering 2009-06-16
Houser, Scott A. Medial surface transformations for rapid approximation of casting solidification Mechanical Engineering 2005-10-07
Howard, Panit High Temperature Seismic Monitoring for Enhanced Geothermal Systems - Implementing a Control Feedback Loop to a Prototype Tool by Sandia National Laboratories Mechanical Engineering 2012-05-16
Howard III, Joseph S. Improved Methods for Modeling Dynamic Stage Characteristics Mechanical Engineering 1999-06-02
Huang, Shiling Linear stability analysis of non-reacting and reacting elliptical jets Mechanical Engineering 2008-06-06
Hubble, David Owen An experimental investigation of the mechanism of heat transfer augmentation by coherent structures Mechanical Engineering 2011-04-11
Hudgins, Douglas B. Enzyme diffusion and cellulose breakdown in the bioremediation of medical waste Mechanical Engineering 2009-04-07
Hughet, James Binaural Hearing Effects of Mapping Microphone Array’s Responses to a Listener’s Head-Related Transfer Functions Mechanical Engineering 2011-10-11
Humphreys, John Christopher Development of an Inertially-Actuated Passive Dynamic Technique to Enable Single-Step Climbing by Wheeled Robots Mechanical Engineering 2008-05-05
Hunderup, James W An experimental investigation of the conversion of NO to NO2 in a simulated gas turbine environment Mechanical Engineering 2009-06-16
Hundley, Robert Wynne Improvements to the kidney dialysis machine Mechanical Engineering 2010-03-30
Hunt, William E. Breakup and coalescence in turbulent two-phase flows Mechanical Engineering 2009-01-17
Hurdus, Jesse Gutierrez A Portable Approach to High-Level Behavioral Programming for Complex Autonomous Robot Applications Mechanical Engineering 2008-05-08
Hurst, William Edwin Piezohydraulic Actuator Design and Modeling Using a Lumped-Parameter Approach Mechanical Engineering 2003-01-16
Hurst, William James Spring Mediated Cranioplasty for the Treatment of Craniosynostosis Mechanical Engineering 2003-04-25
Hussain, Mian M. Time-Resolved Analysis of Circulation Control over Supercritical Airfoil using Digital Particle Image Velocimetry (DPIV) Mechanical Engineering 2005-01-06
Hutcheson, Florence Vanel Advanced modeling of active control of fan noise for ultra high bypass turbofan engines Mechanical Engineering 1999-11-04
Hutchison, Caroline Anne An Image Compression Approach to Cooperative Processing for Swarming Autonomous Underwater Vehicles Mechanical Engineering 2008-08-27
Hylton, Michael Ronnie Assessment of an Innovative Experimental Facility for Testing Diffusing Serpentine Inlets with Large Amounts of Boundary Layer Ingestion Mechanical Engineering 2008-07-11
Idrisi, Kamal Heterogeneous (HG) Blankets for Improved Aircraft Interior Noise Reduction Mechanical Engineering 2008-11-19
Iglesias, Angel Moises Investigating Various Modal Analysis Extraction Techniques to Estimate Damping Ratio Mechanical Engineering 2000-12-01
Ingram, Mark Edward Whole Skin Locomotion Inspired by Amoeboid Motility Mechanisms: Mechanics of the Concentric Solid Tube Model Mechanical Engineering 2006-09-18
Ishii, Toshiyasu Transient response technique applied to active magnetic bearing machinery during rotor drop Mechanical Engineering 2009-04-07
Iskandar, Kurnia Dias Computer-assisted synthesis of wrapping cam mechanisms Mechanical Engineering 2008-09-18
Jacobson, Alan L. An object oriented curve and surface framework Mechanical Engineering 2009-06-11
Jain, Aashish Error Visualization in Comparison of B-Spline Surfaces Mechanical Engineering 1999-10-06
James, Michael Mark Fundamental Studies of the Herschel-Quinke Tube Concept with Mode Measurements Mechanical Engineering 2005-11-30
James, Christian Monje Finite Element Modeling and Exploration of Double Hearing Protection Systems Mechanical Engineering 2006-02-22
James, Ralph William The effect of boundary layer blowing in the corner region of a linear compressor cascade wind tunnel Mechanical Engineering 2009-05-09
Janajreh, Isam Mustafa A device-independent graphical user interface for theoretical studies of surface temperatures generated by friction Mechanical Engineering 2009-12-23
Janakiraman, S. V. Fluid flow and heat transfer in transonic turbine cascades Mechanical Engineering 2009-06-11
Janczak, John Implementation of a Hardware-in-the-Loop System Using Scale Model Hardware for Hybrid Electric Vehicle Development Mechanical Engineering 2007-07-03
Jayaram, Uma Extracting dimensional geometric parameters from B-spline surface models Mechanical Engineering 2007-05-22
Jeric, Kristina Marie An Experimental Evaluation of the Application of Smart Damping Materials for Reducing Structural Noise and Vibrations Mechanical Engineering 1999-04-22
Jernigan, Mary Virginia Statistical Analysis and Computational Modeling of Injuries in Automobile Crashes Mechanical Engineering 2002-05-08
Jessee, J. Patrick A coupled thermal-magnetic finite element model for high frequency transformers Mechanical Engineering 2008-12-17
Jha, Akhilesh Kumar Vibration Analysis and Control of an Inflatable Toroidal Satellite Component Using Piezoelectric Actuators and Sensors Mechanical Engineering 2002-07-10
Jia, Hongyu Impact Damage Resistance of Shape Memory Alloy Hybrid Composite Structures Mechanical Engineering 1998-05-26
Jia, Jianhu Optimization of piezoelectric actuator systems for vibration control of flexible structures Mechanical Engineering 2005-10-12
Johansson, Henrik G. Numerical simulation of two-dimensional Wolfhard-Parker burner Mechanical Engineering 2008-09-18
Johnson, Brody Dylan Control of broadband acoustic radiation from structures using a piezoelectric double-amplifier active-skin Mechanical Engineering 1997-07-23
Johnson, Kurt M A Plug-in Hybrid Electric Vehicle Loss Model to Compare Well-to-Wheel Energy Use from Multiple Sources Mechanical Engineering 2008-07-11
Johnson, Loren Patton Effects of freestream turbulence on turbine blade heat transfer in transonic flow Mechanical Engineering 2009-01-31
Johnson, Christopher Patrick Comparative Analysis of Lightweight Robotic Wheeled and Tracked Vehicle Mechanical Engineering 2012-05-08
Johnson, Nicholas Assessment of Crash Energy - Based Side Impact Reconstruction Accuracy Mechanical Engineering 2011-05-09
Johnsson, Erik L. The use of chemiluminescence for detection of ignition, temperature, and fuel-to-air ratio of flames Mechanical Engineering 2009-05-02
Johnston, R. M. The assemblage and calibration of apparatus for the determination of thermal conductivities of insulating materials Mechanical Engineering 2013-11-15
Jones, Wendy Michele An investigation of the interfacial characteristics of nitinol fibers in a thermoset composite Mechanical Engineering 2008-12-30
Jones, Robert W. Intersection and filleting of non-uniform B-spline surfaces Mechanical Engineering 2009-04-24
Jones, Philip Andrew Techniques in Kalman Filtering for Autonomous Vehicle Navigation Mechanical Engineering 2015-05-19
Jordan, Charles Watson Gas chromatographic determination of carbon dioxide, carbon monoxide, and nitric oxide in diesel exhaust. Mechanical Engineering 2012-11-09
Joshi, Nandan Mobility analysis of variable geometry trusses Mechanical Engineering 2012-09-08
Joyce, Bryan Steven Development of an Electromagnetic Energy Harvester for Monitoring Wind Turbine Blades Mechanical Engineering 2011-12-20
Jumani, Sajit Satish An Invertible Open-Loop Nonlinear Dynamic Temperature Dependent MR Damper Model Mechanical Engineering 2010-05-12
Kabeya, Kazuhisa Structural Health Monitoring Using Multiple Piezoelectric Sensors and Actuators Mechanical Engineering 1998-04-30
Kadam, Rahul Sadashiv Vibration Characterization and Numerical Modeling of a Pneumatic Impact Hammer Mechanical Engineering 2006-08-05
Kafka, Byran C. Measurements of in-cylinder heat transfer with inflow-produced turbulence Mechanical Engineering 2009-04-07
Kaiser, Michael Adam Advancements in the Split Hopkinson Bar Test Mechanical Engineering 1998-05-01
Kanarat, Amnart Modeling and Simulation of a Multi-Unit Tracked Vehicle Mechanical Engineering 1999-11-10
Kanarat, Amnart Motion Planning and Robust Control for Nonholonomic Mobile Robots under Uncertainties Mechanical Engineering 2004-07-17
Kandel, Matthew Kreisman Design of a System to Monitor Youth Workers’ Heat Stress and Positioning using Non-invasive Techniques Mechanical Engineering 2011-12-19
Kanth, Ratnakar M. A personal computer based instrumentation system for determining real-time dynamic torque in rotating machinery Mechanical Engineering 2012-11-17
Kargar, Mehdi Controlling Microbial Adhesion to the Surfaces Using Topographical Cues Mechanical Engineering 2013-05-21
Kartha, Satish Chandrashekhar Active, Passive and Active/Passive Control Techniques For Reduction of Vibrational Power Flow in Fluid Filled Pipes Mechanical Engineering 2000-02-07
Kavarana, Farokh H. Cracked shaft detection rig Mechanical Engineering 2009-03-14
Kawale, Sujay J. Implication of Terrain Topology Modelling on Ground Vehicle Reliability Mechanical Engineering 2011-02-15
König, Daniel Hermann Optimization of the Control Strategy for a Range Extender Vehicle Mechanical Engineering 2010-12-14
Kedrowski, Philip Redleaf Development and Implementation of a Self-Building Global Map for Autonomous Navigation Mechanical Engineering 2001-04-25
Keesee, John Micheal Influence of active magnetic bearing sensor location on the calculated critical speeds of turbomachinery Mechanical Engineering 2013-02-06
Keil, Mitchel J Automatic generation of interference-free geometric models of spatial mechanisms Mechanical Engineering 2008-08-25
Kelly, Allan D. Dynamic finite element modeling and analysis of a hermetic reciprocating compressor Mechanical Engineering 2009-01-24
Kelly, John H. Rule-based fuselage and spine and cross-section methods for computer aided design of aircraft components Mechanical Engineering 2009-06-23
Kemper, Andrew Robb Material Properties of Human Rib Cortical Bone From Dynamic Tension Coupon Testing Mechanical Engineering 2005-07-13
Kempf, Severin Gabriel Numerical Study of the Stability of Embedded Supersonic Compressor Stages Mechanical Engineering 2003-08-13
Kennedy, Eric Allen Lateral and Posterior Dynamic Bending of the Mid-Shaft Femur: Fracture Risk Curves for the Adult Population Mechanical Engineering 2004-05-05
Kern, Joshua Victor The Development of Measurement and Characterization Techniques of Road Profiles Mechanical Engineering 2007-07-20
Kestell, Gayle M Model of chromium poisoning in the cathode of a solid oxide fuel cell using the lattice Boltzmann method Mechanical Engineering 2010-02-24
Ketene, Alperen Nurullah The AFM Study of Ovarian Cell Structural Mechanics in the Progression of Cancer Mechanical Engineering 2011-05-18
Khanna, Vivek K A Study of the Dynamics of Laminar and Turbulent Fully and Partially Premixed Flames Mechanical Engineering 2001-08-05
Kiel, David H. Active damage control using artificial intelligence :initial studies into identification and mitigation Mechanical Engineering 2009-07-29
Kiesling, Thomas C. Impact failure modes of graphite epoxy composites with embedded superelastic nitinol Mechanical Engineering 2005-09-16
Kikuta, Michael Thomas Mechanical Properties of Candidate Materials for Morphing Wings Mechanical Engineering 2003-12-15
Kim, Jeonghoon Investigation of the Herschel-Quincke tube concept in a rectangular lined duct Mechanical Engineering 2001-12-09
Kim, Kihyung Dynamic Proton Exchange Membrane Fuel Cell System Synthesis/Design and Operation/Control Optimization under Uncertainty Mechanical Engineering 2008-02-01
Kim, Woon Kyung Design and Analysis of Switching Circuits for Energy Harvesting in Piezostrutures Mechanical Engineering 2012-08-13
Kimmel, Shawn Christopher Considerations for and Implementations of Deliberative and Reactive Motion Planning Strategies for the Novel Actuated Rimless Spoke Wheel Robot IMPASS for the Two-Dimensional Sagittal Plane Mechanical Engineering 2008-05-07
King, Peter Haywood A Low Cost Localization Solution Using a Kalman Filter for Data Fusion Mechanical Engineering 2008-05-08
King, Jonathan Charles Model-Based Design of a Plug-In Hybrid Electric Vehicle Control Strategy Mechanical Engineering 2012-09-07
Kirchner, William Thomas Ultrasonic acoustic health monitoring of ball bearings using neural network pattern classification of power spectral density Mechanical Engineering 2009-12-14
Kirchner, William Anthropomimetic Control Synthesis: Adaptive Vehicle Traction Control Mechanical Engineering 2012-04-03
Kitts, Zachary Todd An Analytical Study of the Weak Radiating Cell as a Passive Low Frequency Noise Control Device Mechanical Engineering 2000-10-27
Kiyar, Mustafa Baris Active/Passive control of fluid-borne and structure-borne disturbances in fluid-filled piping systems Mechanical Engineering 2004-05-24
Klinksiek, William Frederick An incompressible three-dimensional turbulent boundary layer on the floor of a recurving rectangular channel. Mechanical Engineering 2010-02-17
Klinksiek, William Frederick An implicit numerical solution of the turbulent three-dimensional incompressible boundary-layer equations. Mechanical Engineering 2010-05-19
Klinksiek, David Tillman An implicit numerical solution for the laminar and turbulent flow of an incompressible fluid along the axis of a 90-degree corner. Mechanical Engineering 2013-12-17
Knost, Daniel G. Predictions and Measurements of Film-Cooling on the Endwall of a First Stage Vane Mechanical Engineering 2003-09-25
Knost, Daniel G Parametric Investigation of the Combustor-Turbine Interface Leakage Geometry Mechanical Engineering 2008-09-30
Kochersberger, Kevin A method of determining modal residues using an improved residual model and least squares Mechanical Engineering 2005-10-24
Kolady, Krishnan V. Phigs based phong rendering emulation Software Mechanical Engineering 2009-04-08
Konchuba, Nicholas Temperature Compensation Improvements for Impedance Based Structural Health Monitoring Mechanical Engineering 2011-08-25
Koo, Jeong-Hoi Using Magneto-Rheological Dampers in Semiactive Tuned Vibration Absorbers to Control Structural Vibrations Mechanical Engineering 2003-09-19
Kosoglu, Mehmet Alpaslan Fiberoptic Microneedles for Transdermal Light Delivery Mechanical Engineering 2011-11-01
Kothera, Curt S. Micro-Manipulation and Bandwidth Characterization of Ionic Polymer Actuators Mechanical Engineering 2002-12-06
Kothera, Curt S. Characterization, Modeling, and Control of the Nonlinear Actuation Response of Ionic Polymer Transducers Mechanical Engineering 2005-10-01
Kouroussis, Dimitrios An experimental investigation of the turbulent flow in a closed compound channel Mechanical Engineering 2008-11-07
Kozak, Jeffrey D Investigation of Inlet Guide Vane Wakes in a F109 Turbofan Engine with and without Flow Control Mechanical Engineering 2000-08-31
Kozak, Jeffrey D. 3-D flow calculations of a bifurcated 2D supersonic engine inlet at takeoff Mechanical Engineering 2009-03-03
Kramp, Kenneth P. The Analysis and Creation of Track Irregularities Using TRAKVU Mechanical Engineering 1998-06-30
Krawiec, Bryan Michael A*-Based Path Planning for an Unmanned Aerial and Ground Vehicle Team in a Radio Repeating Operation Mechanical Engineering 2012-05-10
Krishnamurthy, Karthik Chandran Effects of temperature on the electrical impedance of piezoelectric elements Mechanical Engineering 2009-02-13
Krishnamurthy, Nagendra Investigation of Fouling in Wavy-Fin Exhaust Gas Recirculators Mechanical Engineering 2010-04-28
Kruszewski, Eric Investigation of Graphite Bipolar Plates for PEM Fuel Cell Performance Mechanical Engineering 2001-11-28
Kulp, Galen W. A Comparison of Two Air Compressors for PEM Fuel Cell Systems Mechanical Engineering 2002-01-07
Kwong, Gordon Houng Approximations for Nonlinear Differential Algebraic Equations to Increase Real-time Simulation Efficiency Mechanical Engineering 2010-05-19
Lacy, David Terrell An automated methodology for dynamic force analysis of adaptive spatial trusses Mechanical Engineering 2008-11-07
Lagimoniere, Jr., Ernest Eugene The Design and Construction of a High Bandwidth Proportional Fuel Injection System for Liquid Fuel Active Combustion Control Mechanical Engineering 2001-08-22
Lahr, Derek Frei Development of a Novel Cam-based Infinitely Variable Transmission Mechanical Engineering 2009-11-19
Lalande, Frederic Modeling of the induced strain actuation of shell structures Mechanical Engineering 2009-02-13
Lalime, Aimee L. Development of a Computationally Efficient Binaural Simulation for the Analysis of Structural Acoustic Data Mechanical Engineering 2002-08-14
Lam, Margaretha Johanna Hybrid Active/Passive Models with Frequency Dependent Damping Mechanical Engineering 1997-10-27
Lamp, Jennifer Lynn Electrical Power Generation in Microbial Fuel Cells Using Carbon Nanostructure Enhanced Anodes Mechanical Engineering 2009-08-27
Land, Camron C. Effects of Sand Ingestion on the Cooling of Turbine Blade Outer Air Seals Mechanical Engineering 2006-11-29
Lane, Steven Time average feedforward control techniques for time varying systems Mechanical Engineering 2009-06-08
Langdon, Justin David Design and Adaptive Control of a Lab-based, Tire-coupled, Quarter-car Suspension Test Rig for the Accurate Re-creation of Vehicle Response Mechanical Engineering 2007-02-13
Langford, Matthew David Experimental Investigation of the Effects of a Passing Shock on Compressor Stator Flow Mechanical Engineering 2003-04-29
Lanier, Prather Jonathan Stereovision Correction Using Modal Analysis Mechanical Engineering 2010-04-08
Lansey, Christopher A. Analytical and experimental analysis of fireplace performance Mechanical Engineering 2008-11-07
Lanz, Jason E. A Numerical Model for Thermal Effects in a Microwave Irradiated Catalyst Bed Mechanical Engineering 1998-03-26
LaPeter, Christina M. Application of distributed measurements for finite element model verification Mechanical Engineering 2008-12-30
Larkin, Susan M Wheeled autonomous mobile robots for use in harsh environments :a survey of recent publications Mechanical Engineering 2009-01-31
Larson, Christopher Whitford The Design and Construction of a 20" x 20" Mach 2.0 Blowdown Wind Tunnel to Characterize the Lift and Drag of Irregularly Shaped Fragments Mechanical Engineering 2011-04-27
Lartz, Douglas John Feedforward temperature control using a heat flux microsensor Mechanical Engineering 2009-06-30
Lattimer, Brian Y. The transport of high concentrations of carbon monoxide to locations remote from the burning compartment Mechanical Engineering 2007-08-08
Lattimer, Brian Y. Floating head skin friction gage measurements in supersonic flows Mechanical Engineering 2009-06-30
Laux, Christopher D. Finite element analysis of the axial folding bridge Mechanical Engineering 2010-02-16
Law, Yiu Kui Design and Testing of Off-The-Shelf Electronic Components for an Acoustic Emission Structural Health Monitoring System Using Piezoelectric Sensors Mechanical Engineering 2005-08-11
Law, Deify Computational Modeling and Simulations of Hydrodynamics for Air-Water External Loop Airlift Reactors Mechanical Engineering 2010-06-07
Lawson, Michael James Practical Applications of Delta Winglets in Compact Heat Exchangers with Louvered Fins Mechanical Engineering 2006-07-24
Lawson, Seth Augustus Heat Transfer from Multiple Row Arrays of Low Aspect Ratio Pin Fins Mechanical Engineering 2007-02-09
Layos, Aaron J. Active control methods for improving the insertion loss of acoustical enclosures Mechanical Engineering 2009-05-02
Le Fur, Thierry Computational study of 3D turbulent air flow in a helical rocket pump inducer Mechanical Engineering 2012-06-10
Le Gal, Thierry Re-engineering software for integration using computer aided software engineering Mechanical Engineering 2009-06-23
Leaman, Eric Joshua An Experimentally-validated Agent-based Model to Study the Emergent Behavior of Bacterial Communities Mechanical Engineering 2016-12-20
Lee, Munki Heat Transfer and Consolidation Modeling of Fiber Tow in Fiber Placement Mechanical Engineering 2004-03-23
Lee, Patrick James Low Back Biomechanical Analysis of Isometric Pushing and Pulling Tasks Mechanical Engineering 2005-01-06
Lee, Jeongwoo Rotating Inertia Impact on Propulsion and Regenerative Braking for Electric Motor Driven Vehicles Mechanical Engineering 2006-01-04
Lee, Minhyung Analysis of Lumbar Spine Kinematics during Trunk Flexion and Extension Motions Mechanical Engineering 2006-01-20
Lee, Edward Chungjen A study of the static to kinetic friction transition of polymers Mechanical Engineering 2008-07-28
Lee, Minhyung Biomechanical adaptations of human gait due to external loads Mechanical Engineering 2008-08-05
Lee, Richard Chan Stochastic Terrain and Soil Modeling for Off-Road Mobility Studies Mechanical Engineering 2009-04-29
Lee, Kasey M. Experimental design for the evaluation of high-Tc superconductive thermal bridges in a sensor satellite Mechanical Engineering 2009-06-30
Lee, Jeongwoo Vehicle Inertia Impact on Fuel Consumption of Conventional and Hybrid Electric Vehicles Using Acceleration and Coast Driving Strategy Mechanical Engineering 2009-09-17
Lee, HyunWook A Polynomial Chaos Approach for Stochastic Modeling of Dynamic Wheel-Rail Friction Mechanical Engineering 2010-09-09
Leedy, Brett Michael Two Minds for One Vehicle: A Case Study in Deliberative and Reactive Navigation Mechanical Engineering 2006-04-09
Lefebvre, Sylvie Active control of interior noise using piezoelectric actuators in a large-scale composite fuselage model Mechanical Engineering 2010-03-17
Leimkuhler, Matthew Pancoast Linear stability analysis of circular jets :integer, fractional, and multiple mode excitation Mechanical Engineering 2009-06-08
Leitch, Thomas A. Reduction of Unsteady Rotor-Stator Interaction Using Trailing Edge Blowing Mechanical Engineering 1998-07-24
LePera, Stephen Damian An experimental study of controlled gas phase synthesis of nanosize TO2 powders Mechanical Engineering 2009-06-23
LePera, Stephen D Development of a Novel Planar Mie Scattering Method for Measurement of Spray Characteristics Mechanical Engineering 2012-02-07
Leppin, Leiann Kirkland The Conversion of a General Motors Cadillac SRX to Drive-By-Wire Status Mechanical Engineering 2005-12-28
Lesser, Beverly Brown Thermal-magnetic finite element model of a high frequency transformer Mechanical Engineering 2012-08-01
Lethander, Andrew Tait Assessment of a Leading Edge Fillet for Decreasing Vane Endwall Temperatures in a Gas Turbine Engine Mechanical Engineering 2003-12-09
Lewis, Jackson A Finite Element Modeling and Active Control of an Inflated Torus Using Piezoelectric Devices Mechanical Engineering 2000-12-19
Lewis, Daniel Russell Tip clearance and angle of attack effects upon the unsteady response of a vibrating flat plate in crossflow Mechanical Engineering 2009-06-11
Li, Zhonglin Design of Active Structure Acoustic Control Systems Using Eigenassignment Approach Mechanical Engineering 1997-10-30
Li, Xinzuo William Using a non-modal method for system identification of highly damped and high modal density mechanical structures Mechanical Engineering 2008-06-06
Li, Lin Treatment of Uncertainties in Vehicle and Terramechanics Systems Using a Polynomial Chaos Approach Mechanical Engineering 2008-09-19
Li, Shi Modeling of active crack damage control and the active fatique damage control of adhesive joint Mechanical Engineering 2009-08-22
Li, Xinzuo William A precision laser scanning system for experimental modal analysis :its test and calibration Mechanical Engineering 2009-08-22
Li, Shi-Ming Mean-Field Free-Energy Lattice Boltzmann Method For Liquid-Vapor Interfacial Flows Mechanical Engineering 2007-11-16
Liam, Christopher Charles Testing and Modeling of Shock Mitigating Seats for High Speed Craft Mechanical Engineering 2011-05-16
Liang, Chen The constitutive modeling of shape memory alloys Mechanical Engineering 2007-08-23
Liljenberg, Scott Alan Modeling and Stability Analysis of Thermoacoustic Instabilities in Gas Turbine Combustor Sections Mechanical Engineering 2000-10-23
Lin, Mark Wen-Yih Theoretical modeling of the actuation mechanism in integrated induced strain actuator/substructure systems Mechanical Engineering 2006-06-07
Lin, Wenhsyong An object-oriented software development environment for geometric modeling in intelligent computer aided design Mechanical Engineering 2006-12-14
Lin, Wen-Tang Visualization of scalar velocity fields over one- and two-dimensional structures Mechanical Engineering 2009-08-22
Lindamood, Benton Brown The design and test of a high speed engine indicator Mechanical Engineering 2010-05-19
Lindau, Jules Washington Multidimensional dynamic compression system modeling Mechanical Engineering 2009-02-13
Lindau, Jules Washington Heat transfer during pulsed laser cutting of thin sheets Mechanical Engineering 2013-02-06
Lindholm, Brian Eric A Bayesian statistics approach to updating finite element models with frequency response data Mechanical Engineering 2008-06-06
Lindholm, Brian Eric Reconciliation of a Rayleigh-Ritz beam model with experimental data Mechanical Engineering 2009-06-10
Lindsay, Russell Charles Investigation of standard test procedures for integral storage solar domestic hot water systems Mechanical Engineering 2008-09-24
Lippy, Matthew Stephen Development of a Minichannel Compact Primary Heat Exchanger for a Molten Salt Reactor Mechanical Engineering 2011-05-11
Liu, Yu The development of a systematic experimental method for damage identification Mechanical Engineering 2009-06-11
Liu, Mingyi Evaluation of a Simple Model for the Acoustics of Bat Swarms Mechanical Engineering 2016-09-28
Lloyd, Emily Marie Performance Symmetry and Maximum Joint Torques During Recovery from a Simulated Trip Mechanical Engineering 2003-07-25
Lloyd, Justin Michael Electrical Properties of Macro-Fiber Composite Actuators and Sensors Mechanical Engineering 2004-07-09
Lloyd, John William Generalized Predictive Control Parameter Adaptation Using a Fuzzy Logic Approach Mechanical Engineering 2011-10-18
Lohse-Busch, Henning Thermal Overload Capabilities of an Electric Motor and Inverter Unit Through Modeling Validated by Testing Mechanical Engineering 2004-06-06
Lohse-Busch, Henning Development and Applications of the Modular Automotive Technology Testbed (MATT) to Evaluate Hybrid Electric Powertrain Components and Energy Management Strategies Mechanical Engineering 2009-09-25
Lomax, Franklin Delano Application of Concurrent Development Practices to Petrochemical Equipment Design Mechanical Engineering 2001-04-02
Lomax, Franklin D. Investigation of steam reformation of natural gas for the very small scale production of hydrogen fuel for light duty vehicles in appliance-type refueling systems Mechanical Engineering 2009-09-05
Lomenzo, Richard Allan Static Misalignment Effects is a Self-Tracking Laser Vibrometry System for Rotating Bladed Disks Mechanical Engineering 1998-10-16
Lomenzo, Richard A. Dynamic measurement and characterization of Poisson's ratio Mechanical Engineering 2009-06-10
Long, Scott R. Experimental determination of strain rates in stretched laminar diffusion flames Mechanical Engineering 2009-08-22
Lopez Dominguez, Jose Carlos Reconstruction of 3-D structural dynamic response fields :anexperimental, laser-based approach with statistical emphasis Mechanical Engineering 2008-06-06
Losh, James David Linear Stability Analysis of a Rijke Tube and Modeling of Turbulent Combustion Using Dynamic Well-Stirred Reactors Mechanical Engineering 2004-05-25
Loveday, Philip Wayne Analysis and Compensation of Imperfection Effects in Piezoelectric Vibratory Gyroscopes Mechanical Engineering 1999-02-17
Ludman, John Evaluation and design of polymer systems for enhanced microwave heating Mechanical Engineering 2009-06-11
Luedke, Jonathan Glenn Use of Nonlinear Volterra Theory in Predicting the Propagation of Non-uniform Flow Through an Axial Compressor Mechanical Engineering 2001-12-07
Lupi, Alessandro CFD analysis and redesign of centrifugal impeller flows for rocket pumps Mechanical Engineering 2009-06-30
Lyall, Michael Eric Heat Transfer from Low Aspect Ratio Pin Fins Mechanical Engineering 2006-06-07
Lyman, Andrew C. Spatially Resolved Heat Transfer Studies in Louvered Fins for Compact Heat Exchangers Mechanical Engineering 2000-09-17
Lynch, Stephen P. Endwall Heat Transfer and Shear Stress for a Nozzle Guide Vane with Fillets and a Leakage Interface Mechanical Engineering 2007-04-25
MacKay, James D. Analytical method for turbine blade temperature mapping to estimate a pyrometer input signal Mechanical Engineering 2012-11-17
Madden, Marie Catherine A non-clinical method to simultaneously estimate thermal conductivity, volumetric specific heat, and perfusion of in-vivo tissue Mechanical Engineering 2004-08-27
Madsen, Carl-Frédéric An investigation of velocity bias with a three-component LDA in open channel flow Mechanical Engineering 2009-05-09
Mahnken, Brian W. Active structural acoustic control of aircraft interior flow noise via the use of active trim panels Mechanical Engineering 2008-11-01
Maillard, Julien Advanced Time Domain Sensing For Active Structural Acoustic Control Mechanical Engineering 1998-07-18
Majeed, Majed A Deformations of In-plane Loaded Unsymmetrically Laminated Composite Plates Mechanical Engineering 2005-02-25
Malladi, Vijaya Venkata Narasimha Sriram Development and Design of Self-Sensing SMAs using Thermoelectric Effect Mechanical Engineering 2013-06-03
Mallavarapu, Kiran Feedback Control of Ionic Polymer Actuators Mechanical Engineering 2001-07-25
Malowicki, Mark Active Vibration Isolation Using an Induced Strain Actuator with Application to Automotive Seat Suspensions Mechanical Engineering 2000-06-29
Mancuso, Thomas Oxygen diffusion within arterioles and venules Mechanical Engineering 2009-06-08
Maniscalco, Joseph A Monte Carlo ray trace tool for predicting contrast in naval scenes including the effects of polarization Mechanical Engineering 2002-11-12
Mann, Brooks Samuel Transverse Thermoelectric Effects for Cooling and Heat Flux Sensing Mechanical Engineering 2006-06-23
Manoogian, Sarah Jeanette Analysis of Linear Head Accelerations From Collegiate Football Impacts Mechanical Engineering 2005-05-05
Manoogian, Sarah Jeanette Protecting the Pregnant Occupant: Dynamic Material Properties of Uterus and Placenta Mechanical Engineering 2008-06-19
Maples, Allen B Design of a robust acoustic positioning system for an underwater nuclear reactor vessel inspection robot Mechanical Engineering 2009-06-23
Marcaly, Fred W Data reduction and knot removal for non-uniform b-spline surfaces Mechanical Engineering 2009-01-17
Marcotte, Pierre A Study of Distributed Active Vibration Absorbers (DAVA) Mechanical Engineering 2004-09-08
Marcu, Florin M. Semiactive Cab Suspension Control for Semitruck Applications Mechanical Engineering 2009-04-17
Marehalli, Jayavardhan N Assembly Sequence Optimization and Assembly Path Planning Mechanical Engineering 1999-09-18
Marin-Lafflèche, Pascale A study of tribopolymerization under fretting conditions Mechanical Engineering 2009-04-14
Markell, Kyle Charles Exergy Methods for the Generic Analysis and Optimization of Hypersonic Vehicle Concepts Mechanical Engineering 2005-02-17
Marques, Jr., Steven Joseph Passive Scalar Measurements In Actively Excited Free Shear Flows Mechanical Engineering 1998-07-18
Marshall, Jeremy T A Multi-Point Measurement Technique for the Enhancement of Force Measurement with Active Magnetic Bearings (AMB) Mechanical Engineering 2001-05-09
Martin, Luke Andrew Developing a Self-Powered, Wireless Damage Detection System for Structural Health Monitoring Applications Mechanical Engineering 2004-06-13
Martin, Benjamin Ryan Energy Harvesting Applications of Ionic Polymers Mechanical Engineering 2005-04-29
Martin, Christopher Reed Reduced-Order Models for the Prediction of Unsteady Heat Release in Acoustically Forced Combustion Mechanical Engineering 2009-12-22
Martin, Christopher Reed Systematic Prediction and Parametric Characterization of Thermo-Acoustic Instabilities in Premixed Gas Turbine Combustors Mechanical Engineering 2007-01-10
Martin, Luke Andrew A Novel Material Modulus Function for Modeling Viscoelastic Materials Mechanical Engineering 2011-04-15
Marudachalam, Kannan An attempt to quantify errors in the experimental modal analysis process Mechanical Engineering 2009-08-14
Mascarenhas, Wilfred J An improved finite-element model for simulating microwave processing of polymers and polymer-composites in a cylindrical resonant cavity Mechanical Engineering 2009-08-22
Masi, John William Effect of Control Techniques on the Performance of Semiactive Dampers Mechanical Engineering 2002-01-08
Matevosian, Armond Hybrid adaptive feedforward control of structures to seismic inputs Mechanical Engineering 2008-10-01
Matulich, Ryan Douglas Post-fire Mechanical Properties of Aluminum Alloys and Aluminum Welds Mechanical Engineering 2011-05-13
May, James Tethered Payload Control from an Autonomous Helicopter Mechanical Engineering 2010-10-08
Mayo, Jr, David Earl The Effect of Combustor Exit to Nozzle Guide Vane Platform Misalignment on Heat Transfer over an Axisymmetric Endwall at Transonic Conditions Mechanical Engineering 2016-05-12
McAlister, Darrell Scott Analysis of energy flow in controlled structures subject to initial conditions Mechanical Engineering 2009-02-13
McCabe, Brian John Underslung Payload Tension Control from an Autonomous Unmanned Helicopter Mechanical Engineering 2012-05-12
McCarthy, David Lee Creating Complex Hollow Metal Geometries Using Additive Manufacturing and Metal Plating Mechanical Engineering 2012-07-05
McClure, Kerry S. The use of object-oriented tools in the development of a pilot's vision simulation program to aid in the conceptual design of aircraft Mechanical Engineering 2009-07-29
McConnell, Brian Gregory A Coupled Heat Transfer and Electromagnetic Model for Simulating Microwave Heating of Thin Dielectric Materials in a Resonant Cavity Mechanical Engineering 1999-12-15
McCormick, Daniel John An Analysis of Using CFD in Conceptual Aircraft Design Mechanical Engineering 2002-06-04
McCray, Thomas Wade Construction and characterization of removable and reusable piezoelectric actuators Mechanical Engineering 2009-06-23
McCready, Wesley Olin Contact between models of rough surfaces containing spherical asperities. Mechanical Engineering 2010-06-12
McDaniel, Matthew Lee Proposed Design for a Coupled Ground-Source Heat Pump/Energy Recovery Ventilator System to Reduce Building Energy Demand Mechanical Engineering 2011-06-16
McEver, Mark Andrew Optimal Vibration Suppression Using On-line Pole/Zero Identification Mechanical Engineering 1999-12-14
McFarland, Jacob Andrew Conceptual Design and Instrumentation Study for a 2-D, Linear, Wet Steam Turbine Cascade Facility Mechanical Engineering 2008-12-15
McGhee, Samuel H Prediction of film condensation and aerosol formation in a gas-vapor mixture flow through a vertical tube Mechanical Engineering 2009-08-22
McGlumphy, Jonathan Numerical Investigation of Subsonic Axial-Flow Tandem Airfoils for a Core Compressor Rotor Mechanical Engineering 2008-01-25
McKay, Christopher A Carbon Monoxide Generation in a Compartment With a Doorway During a Fire Mechanical Engineering 2002-02-18
McMurray, Kevin E Characterization of boundary conditions for wedge-lock-mounted printed circuit boards Mechanical Engineering 2009-03-04
Meekins, Jeffrey L Optical analysis of the ERBE scanning thermistor bolometer radiometer using the Monte Carlo method Mechanical Engineering 2009-04-07
Mehta, Rumeet Pradeep Labyrinth Seal Preprocessor and Post-Processor Design and Parametric Study Mechanical Engineering 2008-05-12
Meidenbauer, Kennneth Richard An Investigation of the Clothoid Steering Model for Autonomous Vehicles Mechanical Engineering 2007-07-31
Meier, David Alan The Design and Evaluation of a High Frequency Fore-Aft Probe Mechanical Engineering 1997-12-11
Mele, Paul A Mechanical design of a Stewart platform-based crawling vehicle Mechanical Engineering 2010-03-17
Melnyk, Glenn J Mechanisms for automated toolhead changing in nuclear steam generator robotics Mechanical Engineering 2009-06-30
Mendoza, Hector Evaluation of the Effectiveness of an Active Magnetic Damper (AMD) in Damping Subsynchronous Vibrations in a Flexible Rotor Mechanical Engineering 2000-07-05
Menegay, Peter A Computational Model for Two-Phase Ejector Flow Mechanical Engineering 1998-07-18
Menegay, Peter Experimental investigation of an ejector as a refrigerant expansion engine Mechanical Engineering 2009-10-22
Mennitt, Daniel James Multiarray Passive Acoustic Localization and Tracking Mechanical Engineering 2008-11-14
Meyer, Mark J. Understanding the challenges in HEV 5-cycle fuel economy calculations based on dynamometer test data Mechanical Engineering 2011-11-09
Meyers, Brett Albert Feasibility of Echocardiographic Particle Image Velocimetry for evaluation of cardiac left ventricular filling function Mechanical Engineering 2014-09-01
Mezynski, Alexis Measurements of pressure and thermal wakes in a transonic turbine cascade Mechanical Engineering 2009-06-11
Michener, Michael Douglas Measurements of thermal properties and blood perfusion using the heat flux microsensor Mechanical Engineering 2010-03-17
Miller, Kevin C Comparison of the aeroacoustics of two small-scale supersonic inlets Mechanical Engineering 2008-11-01
Miller, Matthew Michael Modeling, Designing, Building, and Testing a Microtubular Fuel Cell Stack Power Supply System for Micro Air Vehicle (MAVs) Mechanical Engineering 2009-10-16
Mills, John Richard A mach 1.95 free-jet facility for experimental investigation of injectant flow patterns Mechanical Engineering 2009-04-08
Miltenberger, Louis C. Finite element modeling of the filament winding process using ABAQUS Mechanical Engineering 2009-06-23
Minter, Dion Len Development of Strategies in Finding the Optimal Cooling of Systems of Integrated Circuits Mechanical Engineering 2004-05-24
Minton, Christopher Mills Wake Filling Techniques for Reducing Rotor-Stator Interaction Noise Mechanical Engineering 2005-07-13
Mital, Manu Thermal Detection of Embedded Tumors using Infrared Imaging Mechanical Engineering 2004-08-31
Mital, Manu Integrated Thermal Management Strategies for Embedded Power Electronic Modules Mechanical Engineering 2006-12-27
Mitchell, Curtis R. Viscous solutions for the Navier Stokes equations using an upwind finite volume technique Mechanical Engineering 2012-06-10
Mitchell, Bruce Wayne Determination of acoustic ray paths in enclosed spaces. Mechanical Engineering 2013-11-15
Mitchell, Bruce Wayne Determination of Acoustic Ray Paths in Enclosed Spaces Mechanical Engineering 2013-12-16
Mohammedshah, Juzer Mohsin System identification of adaptive composites Mechanical Engineering 2009-04-07
Mohan, Anant Nonlinear Investigation of the Use of Controllable Primary Suspensions to Improve Hunting in Railway Vehicles Mechanical Engineering 2003-06-25
Molina, Gustavo Jose Triboemission From Ceramics: Charge Intensity and Energy Distribution Characterizations Mechanical Engineering 2000-07-06
Molique, Robert S Frictional behavior of polymers :the transition from static to kinetic conditions Mechanical Engineering 2009-06-16
Molisani, Leonardo Rafael A Coupled Tire Structure-Acoustic Cavity Model Mechanical Engineering 2004-05-25
Moncman, Deborah A. Optimal experimental designs for the estimation of thermal properties of composite materials Mechanical Engineering 2009-06-10
Mondscehin, Brian David Evaluation of Alternate Bearing Designs in a High Speed Automotive Turbocharger Mechanical Engineering 2010-06-10
Montgomery, David Eric Modeling and visualization of laser-based three-dimensional experimental spatial dynamic response Mechanical Engineering 2007-10-05
Montgomery, David Eric An interactive PHIGS+ model rendering system applied to postprocessing of spatial mechanisms Mechanical Engineering 2009-03-24
Moo, Jason Applying human-computer interaction methodologies to the development of computer-aided design software Mechanical Engineering 2009-03-04
Moore, George Franklin The determination of a water film coefficient and a condensing steam film coefficient for a single tube heat exchanger Mechanical Engineering 2010-02-23
Morazzani, Ivette Marie Investigation of Standing Up Strategies and Considerations for Gait Planning for a Novel Three-Legged Mobile Robot Mechanical Engineering 2008-05-07
Morel, Yannick Applied Nonlinear Control of Unmanned Vehicles with Uncertain Dynamics Mechanical Engineering 2009-04-28
Morris, Mary Beth Flow randomness and tip losses in transonic rotors Mechanical Engineering 2009-07-21
Morris, Angela Experimental and Computational Study of Heat Transfer on a Turbine Blade Tip with a Shelf Mechanical Engineering 2005-02-22
Moshier, Monty Laser-based broad-band spatially dense automated data acquisition system Mechanical Engineering 2008-09-18
Mosier, Roger Carhart An experimental apparatus for the measurement of moisture permeability of building materials Mechanical Engineering 2009-07-10
Mounaud, Laurent Georges A Parametric Study of the Effect of Fire Source Elevation in a Compartment Mechanical Engineering 2005-01-12
Mount, Kristopher Patrick Finite Element Analysis of Probe Induced Delamination of a Thin Film at an Edge Interface Mechanical Engineering 2003-01-21
Moutran, Serge Riad Feasible Workspace for Robotic Fiber Placement Mechanical Engineering 2002-05-14
Mowery, David Kaiser Use of a textile wastewater sludge as a supplemental solid fuel Mechanical Engineering 2008-11-01
Moyer, Steven Craig Infrared radiometric measurements of surface temperatures generated by friction of sliding iron-on-sapphire Mechanical Engineering 2008-09-24
Moyers, Kevin Keith A microcomputer-based data acquisition system for diagnostic monitoring and control of high-speed electric motors Mechanical Engineering 2013-03-12
Moyka, Ana S Adaptive vibration absorber Mechanical Engineering 2007-10-05
Mozingo, Joseph Alexander Evaluation of a Strut-Plasma Torch Combination as a Supersonic Igniter-Flameholder Mechanical Engineering 2005-12-27
Mudaliar, Ashvinikumar Development of a Phantom Tissue for Blood Perfusion Measurements and Noninvasive Blood Perfusion Estimation in Living Tissue Mechanical Engineering 2007-03-15
Mudarri, Timothy C. A Novel Use for Ionic Polymer Transducers for Ionic Sensing in Liquid Mechanical Engineering 2004-01-06
Muecke, Karl James An Analytical Motion Filter for Humanoid Robots Mechanical Engineering 2009-04-07
Mumaw, James A comparison of analytical models and experimental results for the acoustic response in a non-rigid-wall enclosure Mechanical Engineering 2008-10-02
Munoz Guevara, Jules Ricardo Optimization Strategies for the Synthesis / Design of Hihgly Coupled, Highly Dynamic Energy Systems Mechanical Engineering 2000-10-12
Murphy, Devon Patrick Analysis of a Rotary Ultrasonic Motor for Application in Force-Feel Systems Mechanical Engineering 2008-09-09
Murray, Kevin Hugh An Optical Resection Local Positioning System for an Autonomous Agriculture Vehicle Mechanical Engineering 2012-10-12
Mutter, Troy Blake Numerical simulations of elliptical jets :a study of jet entrainment Mechanical Engineering 2009-07-10
Nadeem, Tariq Computer simulation of the steady-state thermodynamic processes and piston ring wear for a multi-stage intercooled reciprocating air compressor Mechanical Engineering 2010-06-12
Nafziger, John S Reverse parameterization of B-spline surfaces for data transfer Mechanical Engineering 2009-06-30
Naik, Ankur Arc Path Collision Avoidance Algorithm for Autonomous Ground Vehicles Mechanical Engineering 2006-01-16
Najem, Joseph Samih Design and Development of a Bio-inspired Robotic Jelly sh that Features Ionic Polymer Metal Composites Actuators Mechanical Engineering 2012-05-04
Nam, Jong-Hoon A Computational Study on the Structure, Dynamics and Mechanoelectric Transduction of Vestibular Hair cell Mechanical Engineering 2005-08-11
Namboodri, Chettoor G Experimental investigation and modeling of the electrostrictive relaxor ferroelectric lead magnesium niobate-lead titinate Mechanical Engineering 2009-07-21
Narayanan, Parasuram An object-oriented framework for the creation of customized expert system for CAD Mechanical Engineering 2009-06-30
Nash, Grant Utilizing Distributed Vibration Absorbers to Reduce Noise Transmission Through the Windshield of a Cessna 150 Mechanical Engineering 2004-08-13
Nasir, Shakeel Showerhead Film Cooling Performance of a Turbine Vane at High Freestream Turbulence in a Transonic Cascade Mechanical Engineering 2008-08-07
Nasser, Khalil Maurice Development and Analysis of the Lumped Parameter Model of a Piezo-Hydraulic Actuator Mechanical Engineering 2000-11-21
Nathani, Arun A turbulent combustion noise model Mechanical Engineering 2012-06-10
Navarra, Kelly R. Development of the Pressure-Sensitive-Paint Technique for Advanced Turbomachinery Applications. Mechanical Engineering 1997-04-24
Neal III, David Anthony Design, Development, and Analysis of a Morphing Aircraft Model for Wind Tunnel Experimentation Mechanical Engineering 2006-05-02
Neff, John Michael Organic emissions during oven drying of wood Mechanical Engineering 2009-10-24
Negus, Charles H. An Interactive Chemical Equilibrium Solver for the Personal Computer Mechanical Engineering 1998-07-20
Nelson, Edward L Temperature, pressure, and infrared image survey of an axisymmetric heated exhaust plume Mechanical Engineering 2008-06-06
Nelson, Edward L Development of an infrared gaseous radiation band model based on NASA SP-3080 for computational fluid dynamic code validation applications Mechanical Engineering 2010-06-08
Neumann, Michael Landon A method for the spatial functionalization of the dynamic response of a structure with structural stability considerations Mechanical Engineering 2009-06-11
Newbury, Kenneth Matthew Characterization, Modeling, and Control of Ionic Polymer Transducers Mechanical Engineering 2002-09-18
Newman, James Charles Integrated Multidisciplinary Design Optimization Using Discrete Sensitivity Analysis for Geometrically Complex Aeroelastic Configurations Mechanical Engineering 1997-07-22
Newman, Andrew Samuel Performance of a Showerhead and Shaped Hole Film Cooled Vane at High Freestream Turbulence and Transonic Conditions Mechanical Engineering 2010-05-18
Newsom, Jerry Russell Designing Active Control Laws in a Computational Aeroelasticity Environment Mechanical Engineering 2002-03-25
Newsome, Stephen Sumner Design and evaluation of a prototype high precision temperature telemetry system. Mechanical Engineering 2010-05-19
Nguyen, Tai K Optimization of radiometric channel solar calibration for the Clouds and the Earth's Radiant Energy System (CERES) using the Monte-Carlo method Mechanical Engineering 2009-06-23
Nguyen, Chuong Hoang Features identification and tracking for an autonomous ground vehicle Mechanical Engineering 2013-05-22
Ni, Lingli Fault-Tolerant Control of Unmanned Underwater Vehicles Mechanical Engineering 2001-07-02
Niezrecki, Christopher Structural & Internal Acoustic Response of Cylinders with Applications to Rocket Payload Fairings Mechanical Engineering 1999-06-28
Niezrecki, Christopher Power factor correction and power consumption characterization of piezoelectric actuators Mechanical Engineering 2010-05-11
Nikkhah, Mehdi Identification of Cell Biomechanical Signatures Using Three Dimensional Isotropic Microstructures Mechanical Engineering 2010-12-14
Ninnemann, Todd A. Effects of riblets on the performance of the supersonic through-flow fan cascade blades Mechanical Engineering 2005-10-24
Ninnemann, Todd A Aspirating probes for measurement of mean concentration and fluctuating quantities in supersonic air/helium shear layer Mechanical Engineering 2009-12-23
Nix, Andrew Carl Effects of High Intensity, Large-Scale Freestream Combustor Turbulence On Heat Transfer in Transonic Turbine Blades Mechanical Engineering 2003-04-30
Nix, Andrew Carl Effects of shock wave passing on turbine blade heat transfer in a transonic turbine cascade Mechanical Engineering 2008-08-22
Norberg, Adam D. Facility and Methodologies for Evaluation of Hydrogen-Air Mixer Performance Mechanical Engineering 2006-09-19
Nord, Lars A Thermoacoustic Characterization of a Rijke-type Tube Combustor Mechanical Engineering 2001-03-10
Norris, James Alexander Behavior of Magneto-Rheological Fluids Subject to Impact and Shock Loading Mechanical Engineering 2003-07-02
Nouri, Arash Correlation-Based Detection and Classification of Rail Wheel Defects using Air-coupled Ultrasonic Acoustic Emissions Mechanical Engineering 2016-05-24
Nowinski, Matthew C A two-dimensional model to predict rotating stall in axial-flow compressors Mechanical Engineering 2009-08-04
Nuckolls, William E Fan noise reduction from a supersonic inlet Mechanical Engineering 2009-08-22
Nutter, Brian Vincent Thermal Analysis of a Vaporization Source for Inorganic Coatings Mechanical Engineering 2000-12-20
O'Connor, Nicholas L. The Complex Spatiotemporal Dynamics of a Shallow Fluid Layer Mechanical Engineering 2008-05-13
Oakes, Brian K Reduction of convective heat transfer from reacting flows by application of electric fields Mechanical Engineering 2009-08-04
Ochel, Ralf NOx reduction for natural gas engines with increased ignition energy and plasma jet ignitors Mechanical Engineering 2009-06-12
Ofori-Boateng, Akua Boabema A Study of the Effect of Varying Air-Inflated Seat Cushion Parameters on Seating Comfort Mechanical Engineering 2003-07-08
Ogburn, Michael James Systems Integration, Modeling, and Validation of a Fuel Cell Hybrid Electric Vehicle Mechanical Engineering 2000-05-03
Ohanehi, Donatus Chukwubueze Reduction of energy losses :a key to improved rock drilling? Mechanical Engineering 2010-06-08
Ohanehi, Donatus Chukwubueze Transfer matrix analysis of an electrohydraulically driven rotary- vibratory drilling system Mechanical Engineering 2010-06-09
Ohanian, Osgar John Mass Properties Calculation and Fuel Analysis in the Conceptual Design of Uninhabited Air Vehicles Mechanical Engineering 2003-12-12
Ohanian, Osgar John Ducted Fan Aerodynamics and Modeling, with Applications of Steady and Synthetic Jet Flow Control Mechanical Engineering 2011-05-12
Ong, Chin Guan Shaking and Balance of a Convertible One- and Two-Cylinder Reciprocating Compressor Mechanical Engineering 2000-03-09
Osborne, Jr., Denver Jackson Time-resolved measurements of a transonic compressor during surge and rotating stall Mechanical Engineering 2009-07-10
Owellen, Michael C. Biotribology: The Effect of Lubricant and Load on Articular Cartilage Wear and Friction Mechanical Engineering 1997-07-21
Owen, Christopher Cooper Magnetic Induction for In-situ Healing of Polymeric Material Mechanical Engineering 2006-05-23
Oyarzabal, Borja Application of a decomposition strategy to the optimal synthesis/design of a fuel cell sub-system Mechanical Engineering 2001-08-08
Padmanabhan, Babu A study of isostatic framework with application to manipulator design Mechanical Engineering 2005-10-20
Padmaperuma, Dinnaga P Modelling and prediction of flashing flow in short tubes Mechanical Engineering 2009-06-11
Paine, Jeffrey Steven Nelson Multi-functional SMA hybrid composite materials and their applications Mechanical Engineering 2008-06-06
Paine, Jeffrey Steven Nelson The performance of nitinol shape memory alloy actuators embedded in thermoplastic composite material systems Mechanical Engineering 2009-10-10
Palmer, Matthew Earle Kinematics of beam flexure four-bar linkages with applications in a compound bow Mechanical Engineering 2008-11-01
Pan, Jan Wei On-line Nonlinear Characterization of Anisotropic Materials Mechanical Engineering 2010-12-22
Panchal, Kapil V Development of a robust numerical optimization methodology for turbine endwalls and effect of endwall contouring on turbine passage performance Mechanical Engineering 2011-10-18
Pande, Abhijit Effect of struts on aeroacoustics of axisymmetric supersonic inlets Mechanical Engineering 2009-07-29
Pang, Ying-Feng Integrated Thermal Design and Optimization Study for Active Integrated Power Electronic Modules (IPEMs) Mechanical Engineering 2002-09-08
Pang, Ying-Feng Assessment of Thermal Behavior and Development of Thermal Design Guidelines for Integrated Power Electronics Modules Mechanical Engineering 2005-01-25
Parathiras, Vasilis Stress-density relationships for an agricultural soil Mechanical Engineering 2013-02-07
Pare, Christopher A. Experimental Evaluation of Semiactive Magneto- Rheological Suspensions for Passenger Vehicles Mechanical Engineering 1998-05-26
Park, Gyuhae Assessing Structural Integrity using Mechatronic Impedance Transducers with Applications in Extreme Environments Mechanical Engineering 2000-05-15
Park, David Numerical simulations of airflow and heat transfer in a room with a large opening Mechanical Engineering 2013-10-29
Pascoe, James The evoluation of 'Boxes' to quantized inductive learning :a study in inductive learning Mechanical Engineering 2008-12-17
Patil, Sunil Large Eddy Simulations of high Reynolds number Complex Flows with Synthetic Inlet Turbulence Mechanical Engineering 2011-01-28
Patricio, Paul Stephen Effects of Frame Design and Cab Suspension on the Ride Quality of Heavy Trucks Mechanical Engineering 2002-08-31
Patrick, Wilfred Vinod Computations of Flow Structures and Heat Transfer in a Dimpled Channel at Low to Moderate Reynolds Number Mechanical Engineering 2005-06-04
Patterson, Douglas T Tribopolymerization as an approach to two-stroke engine lubrication Mechanical Engineering 2009-01-31
Patton, Kevin Bernard Analysis of parametric model signal processing techniques for signature analysis Mechanical Engineering 2010-06-12
Pawtowski, E. C Development of the second-generation IMTS (Intelligent Monitoring and Trending System) and WOT (Wizard of Tech) expert system for rotating machinery Mechanical Engineering 2008-10-02
Paxton, Scott System Identification and Optimization Methodologies for Active Structural Acoustic Control of Aircraft Cabin Noise Mechanical Engineering 1997-07-23
Payne, Stephen Richard A CAD-interactive software package for the synthesis of planar disk cams Mechanical Engineering 2008-09-04
Peabody, Hume L. Evaluation of a Heat Flux Microsensor in a Transonic Turbine Cascade Mechanical Engineering 1997-10-30
Peairs, Daniel M. Development of a Self-Sensing and Self-Healing Bolted Joint Mechanical Engineering 2002-07-08
Peairs, Daniel Marsden High Frequency Modeling and Experimental Analysis for Implementation of Impedance-based Structural Health Monitoring Mechanical Engineering 2006-06-01
Peatross, Michelle J An experimental study of forced ventilation glovebox fires Mechanical Engineering 2009-09-12
Pennington, Sandra Lynn A software engineering approach to the integration of CAD/CAM systems Mechanical Engineering 2007-07-10
Perez, Kevin Blake Hybridization of PolyJet and Direct Write for the Direct Manufacture of Functional Electronics in Additively Manufactured Components Mechanical Engineering 2013-12-26
Periannan, Vijayanand Investigation of the Effects of Various Energy and Exergy-Based Objectives/Figures of Merit on the Optimal Design of High Performance Aircraft System Mechanical Engineering 2005-03-04
Permana, Adhi D Optimal Design and Operation of A Hybrid Gas/Electric Chilled Water Plant Mechanical Engineering 1999-07-28
Perry, Michael The Effect of Freestream Turbulence on Separation at Low Reynolds Numbers in a Compressor Cascade Mechanical Engineering 2007-11-27
Perry, Matthew Vincent An Investigation of Lean Premixed Hydrogen Combustion in a Gas Turbine Engine Mechanical Engineering 2009-07-06
Peters, David W Tip leakage loss development in a linear turbine cascade Mechanical Engineering 2009-09-05
Peters, Richard Edward An experimental apparatus for the measurement of sorption isotherms of moisture in porous building materials Mechanical Engineering 2009-09-12
Pettit, Gregory William Model to Evaluate the Aerodynamic Energy Requirements of Active Materials in Morphing Wings Mechanical Engineering 2001-12-21
Pickett, Peter Brown An Investigation of Active Tonal Spectrum Control as Applied to the Modern Trumpet Mechanical Engineering 1998-06-08
Pilson, Richard Ryan Automated Manufacture of Spinal Instrumentation Mechanical Engineering 2006-02-19
Pinto, Eduardo Jose A Three Dimensional Discretized Tire Model For Soft Soil Applications Mechanical Engineering 2012-03-02
Pinto, Preston Albert Novel Bio-inspired Aquatic Flow Sensors Mechanical Engineering 2012-06-28
Pitchford, Corey Impedance-Based Structural Health Monitoring of Wind Turbine Blades Mechanical Engineering 2007-09-06
Pline, Kevin Michael Effects of Lumbar Extensor Fatigue on Ankle Joint Motion Sense and Prolonged Effect on Postural Sway Mechanical Engineering 2005-05-05
Pokines, Brett J A substructure synthesis formulation for vibration isolation Mechanical Engineering 2008-06-06
Poliachik, Sandra Louise Transplant organ preservation cooler Mechanical Engineering 2009-03-14
Pollard, Jr., William Nichols Non-contact Temperature Measurement of Stainless Steel in a TIG Welding Process Mechanical Engineering 2009-10-19
Ponton, Charles B. Finite Element Analysis of Industrial Circular Sawblade With Respect to Tensioning, Rotating, Cutting, and Expansion Slots Mechanical Engineering 2007-02-19
Popernack, Thomas G. Development of a data reduction method for a high frequency angle probe Mechanical Engineering 2012-11-20
Popp, Oliver Steady and Unsteady Heat Transfer in a Film Cooled Transonic Turbine Cascade Mechanical Engineering 1999-08-03
Porterfield, John Fulton High resolution modal analysis using poles obtained at a single location Mechanical Engineering 2009-08-04
Power, Erik D. A Nonlinear Finite Element Model of the Human Eye to Investigate Ocular Injuries From Night Vision Goggles Mechanical Engineering 2001-04-26
Poynor, James Conner Innovative Designs for Magneto-Rheological Dampers Mechanical Engineering 2001-08-14
Prausa, Jeffrey Nathaniel Heat Transfer Coefficient and Adiabatic Effectiveness Measurements for an Internal Turbine Vane Cooling Feature Mechanical Engineering 2004-05-25
Price, Darryl Brian Estimation of Uncertain Vehicle Center of Gravity using Polynomial Chaos Expansions Mechanical Engineering 2008-06-17
Priestley, Kory James Use of First-Principle Numerical Models to Enhance the Understanding of the Operational Analysis of Space-Based Earth Radiation Budget Instruments Mechanical Engineering 1997-07-25
Priestly, Kory James An end-to-end model of the Earth Radiation Budget Experiment (ERBE) Earth-viewing nonscanning radiometric channels Mechanical Engineering 2009-08-18
Prins, Robert Jack System Identification and Calibration Techniques for Force Measurement in Active Magnetic Bearings Mechanical Engineering 2005-12-16
Promwungkwa, Anucha Data Structure and Error Estimation for an Adaptive p-Version Finite Element Method in 2-D and 3-D Solids Mechanical Engineering 1998-04-30
Pullins, Clayton Anthony High Temperature Heat Flux Measurement: Sensor Design, Calibration, and Applications Mechanical Engineering 2011-05-18
Putney, Joseph Satoru Reactive Navigation of an Autonomous Ground Vehicle Using Dynamic Expanding Zones Mechanical Engineering 2006-05-25
Putz, James M Development of a direct-force-reading, thin-film shear stress gage Mechanical Engineering 2009-10-10
Putz, John M The development of instrumentation for the support of skin friction and heat flux measurements Mechanical Engineering 2009-10-22
Rabe, Angela C Effectiveness of a Serpentine Inlet Duct Flow Control Scheme at Design and Off-Design Simulated Flight Conditions Mechanical Engineering 2003-08-14
Raben, Samuel Near wall high resolution particle image velocimetry and data reconstruction for high speed flows Mechanical Engineering 2008-05-12
Raju, Vinod Implementing Impedance - Based Health Monitoring Mechanical Engineering 1997-11-14
Raju, K. V. S. Finite element based non-linear transient analysis of active magnetic bearing turbomachinery Mechanical Engineering 2005-10-07
Ramanata, Peeroon Pete Optimal Vehicle Path Generator Using Optimization Methods Mechanical Engineering 1998-04-15
Ramani, Anand Two-step Component Mode Synthesis with convergence for the eigensolution of large-degree-of-freedom systems Mechanical Engineering 2006-08-14
Ramani, Anand Finite element modeling of a refrigeration compressor for noise prediction applications Mechanical Engineering 2009-08-18
Ramesh, Krishnaswamy Advanced analysis of rotor-bearing systems for stability and response Mechanical Engineering 2008-06-06
Ramirez, Rachael Angela Computer Vision Based Analysis of Broccoli for Application in a Selective Autonomous Harvester Mechanical Engineering 2006-08-02
Ranalli, Joseph Allen Spatially Resolved Analysis of Flame Dynamics for the Prediction of Thermoacoustic Combustion Instabilities Mechanical Engineering 2009-05-11
Rancruel, Diego Fernando A Decomposition Strategy Based on Thermoeconomic Isolation Applied to the Optimal Synthesis/Design and Operation of an Advanced Fighter Aircraft System Mechanical Engineering 2003-05-15
Rancruel, Diego Fernando Dynamic Synthesis/Design and Operation/Control Optimization Approach applied to a Solid Oxide Fuel Cell based Auxiliary Power Unit under Transient Conditions Mechanical Engineering 2005-02-22
Rankle, Hugo Elias Camargo Acoustic prediction and noise control of a refrigeration compressor Mechanical Engineering 2009-09-05
Ranson, William Wayne Adiabatic Effectiveness Measurements of Leakage Flows along the Hub Region of Gas Turbine Engines Mechanical Engineering 2004-05-12
Rao, Nikhil M Reduction of Unsteady Stator-Rotor Interaction by Trailing Edge Blowing Using MEMS Based Microvalves Mechanical Engineering 1999-04-23
Raphael-Mabel, Sujay Anand Design and Calibration of a Novel High Temperature Heat Flux Sensor Mechanical Engineering 2005-04-12
Rastgaar Aagaah, Mohammad Vibration Suppression using Orthogonal Eigenstructure Control Mechanical Engineering 2008-08-02
Rath, Amber Lorraine The Effects of Extraocular Muscles on Eye Biomechanics Mechanical Engineering 2005-05-05
Raven, Hans Rafael Flow Control Optimization for Improvement of Fan Noise Reduction Mechanical Engineering 2006-01-07
Ravetta, Patricio A LORE Approach for Phased Array Measurements and Noise Control of Landing Gears Mechanical Engineering 2005-12-07
Rawal, Dharamendra Niranjan Study of the effect of sensor position on the forced response characteristics of rotors with active magnetic bearings Mechanical Engineering 2009-03-14
Reader, Daniel Martin Nonlinear Mr Model Inversion for Semi-Active Control Enhancement With Open-Loop Force Compensation Mechanical Engineering 2009-05-12
Reagle, Colin James Heat Transfer Measurements Using Thin Film Gauges and Infrared Thermography on a Film Cooled Transonic Vane Mechanical Engineering 2009-05-20
Reagle, Colin James Technique for Measuring the Coefficient of Restitution for Microparticle Sand Impacts at High Temperature for Turbomachinery Applications Mechanical Engineering 2012-09-05
Reaney, James E The use of chemiluminescence for the detection of temperature and fuel-to-air ratio in turbulent premixed flames Mechanical Engineering 2009-09-19
Red Wing, Rodney D Adaptive tuned vibration absorber Mechanical Engineering 2008-08-25
Reedy, Steven W The determination of pressure profiles in oil ring seals considering the influence of temperature gradients in the sealing fluid Mechanical Engineering 2010-06-12
Regner, Keith Thomas Combining In Situ Measurements and Advanced Catalyst Layer Modeling in PEM Fuel Cells Mechanical Engineering 2011-09-08
Reichert, Brian Anthony Application of Magnetorheological Dampers For vehicle Seat Suspensions Mechanical Engineering 1997-12-03
Reid, Terry Vincent A Computational Approach For Investigating Unsteady Turbine Heat Transfer Due To Shock Wave Impact Mechanical Engineering 1999-01-10
Relation, Heather L Application of a modified k-[epsilon] turbulence model to gas turbine combustor geometries Mechanical Engineering 2009-10-31
Remillieux, Marcel Christophe Aeroacoustic Study of a Model-Scale Landing Gear in a Semi-Anechoic Wind Tunnel Mechanical Engineering 2007-04-10
Remillieux, Marcel C Development of a Model for Predicting the Transmission of Sonic Booms into Buildings at Low Frequency Mechanical Engineering 2010-05-04
Ren, Ping Kinematics Analysis of Two Parallel Locomotion Mechanisms Mechanical Engineering 2010-09-08
Renaghan, Liam Eamon On-Chip Isotropic Microchannels for Cooling Three Dimensional Microprocessors Mechanical Engineering 2009-12-22
Renaud, Philippe Computational study of 3D turbulent flow in a tandem inducer/impeller rocket pump rotor Mechanical Engineering 2009-01-31
Renfrow, Joseph A A comparison of the use of classical and modern control design techniques for improving the lateral-directional powered approach flying qualities of the F-14 aircraft Mechanical Engineering 2009-07-29
Renner, Michael Robert Machine Learning Simulation: Torso Dynamics of Robotic Biped Mechanical Engineering 2007-08-17
Renno, Jamil M Dynamics and Control of Membrane Mirrors for Adaptive Optic Applications Mechanical Engineering 2008-09-05
Rettew, A. Louisa The use of hot-wire anemometry in studying supersonic slot injection into a supersonic flow Mechanical Engineering 2012-08-01
Rice, Matthew Jason Simulation of Isothermal Combustion in Gas Turbines Mechanical Engineering 2004-02-19
Rice, Clifford Keith Analytical methods for evaluating two-dimensional effects in flat- plate solar collectors. Mechanical Engineering 2010-04-07
Rice, Matthew Jason High Resolution Simulation of Laminar and Transitional Flows in a Mixing Vessel Mechanical Engineering 2011-05-14
Rice, James G. Experimental and predicted performance for the combustion of a low heating value gas in a swirl burner Mechanical Engineering 2012-11-29
Richard, John S Modeling of multiple layered piezoelectric actuators in active structural control Mechanical Engineering 2009-12-05
Richards, John S An Exploration of Secondary Fuel Injection as Actuation for Control of Combustion Instabilities in a Laminar Premixed Tube Combustor Mechanical Engineering 2000-05-02
Richards, Russell Joseph Comparison of Linear, Nonlinear, Hysteretic, and Probabilistic MR Damper Models Mechanical Engineering 2007-03-11
Richter, David M. A Case Study of Pedagogy in an Interdisciplinary Green Engineering Course Mechanical Engineering 2008-05-09
Ricketts, Patricia Lynn Development of the Passive Perfusion Probe for Non-Invasive Blood Perfusion Measurement Mechanical Engineering 2007-05-18
Riffe, Delmar Ray Effects of internal surface configuration on performance of a direct expansion evaporator Mechanical Engineering 2010-04-26
Ringler, Wilson E An air-to-air heat pump Mechanical Engineering 2010-02-23
Ringshia, Aditya K Aerodynamic Measurements in a Wind Tunnel on Scale Models of a 777 Main Landing Gear Mechanical Engineering 2006-08-16
Risi, John D Analytical investigation of active control of radiated inlet noise from turbofan engines Mechanical Engineering 2009-08-22
Riutort, Kevin T Applied design and implementation of straight-line mechanisms Mechanical Engineering 2008-09-18
Rivera, Alejandro Non-Linear Finite Element Method Simulation and Modeling of the Cold and Hot Rolling Processes Mechanical Engineering 2007-01-24
Rivera, Francisco An object-oriented method of mission profile input for aircraft design Mechanical Engineering 2009-09-12
Robertson, Zachary Burton Smith Deposition of Newtonian Particles Entrained in a Turbulent Axisymmetric Free Jet Mechanical Engineering 2012-04-24
Robinson, Paul S. Development of Methodologies for the Noninvasive Estimation of Blood Perfusion Mechanical Engineering 1998-01-29
Robinson, Walter Junkin Charge Control of Ionic Polymers Mechanical Engineering 2005-08-02
Rodriguez, Carlos G. One-Dimensional, Finite-Rate Model for Gas-Turbine Combustors Mechanical Engineering 1997-07-11
Rodriguez, Carlos G Viscous-inviscid interaction for incompressible flows over airfoils Mechanical Engineering 2009-09-19
Rodriguez-Davila, Hector M. Optimum design for feedforward structural-acoustic control of complex structural systems Mechanical Engineering 2005-10-26
Rogers, Ellen Louise Prolonged Lumbar Flexion Disturbs Paraspinal Reflex Behavior Mechanical Engineering 2005-02-16
Rojas, Roberto Geometric trimming of B-spline surfaces Mechanical Engineering 2009-01-17
Roloff, Thomas Paul Design and development of an odorless toilet Mechanical Engineering 2010-10-13
Roos, Rollin M 3-D temperature distributions in spot heating of a ceramic by a focused microwave source Mechanical Engineering 2008-09-18
Rorrer, Ronald Alvin Lee Frictional oscillations in elastomeric sliding Mechanical Engineering 2008-07-28
Rose, John A The experimental characterization of the dynamics of a reciprocating freon compressor system Mechanical Engineering 2008-12-30
Rose, Michael Scott Design of a Helicopter Deployable Ground Robotic System for Hazardous Environments Mechanical Engineering 2010-02-06
Rosette, Keith Andrew Investigation of a compact acoustic source array for the active control of aircraft engine fan noise Mechanical Engineering 2008-12-30
Roskoff, Nathan J Implementation and Verification of the Subgroup Decomposition Method in the TITAN 3-D Deterministic Radiation Transport Code Mechanical Engineering 2014-05-19
Ross, Bradley W. Attenuation of Low Frequency Structurally Radiated Noise With an Array of Weak Radiating Cells Mechanical Engineering 1998-02-06
Rozati, Ali Large Eddy Simulation of Leading Edge Film Cooling: Flow Physics, Heat Transfer, and Syngas Ash Deposition Mechanical Engineering 2007-12-17
Rubenstein, Stephen P An experiment in state-space vibration control of steady disturbances on a simply-supported plate Mechanical Engineering 2010-03-17
Ruckman, Christopher E A regression-based approach for simulating feedfoward active noise control, with application to fluid-structure interaction problems Mechanical Engineering 2008-06-06
Ruggiero, Eric John Active Dynamic Analysis and Vibration Control of Gossamer Structures Using Smart Materials Mechanical Engineering 2002-05-07
Ruggiero, Eric John Modeling and Control of SPIDER Satellite Components Mechanical Engineering 2005-08-02
Rule, James Arthur A strategy for modeling hydroelectric plants and improving their performance Mechanical Engineering 2008-07-28
Rundgren, Brian Tavis Optimized Sythesis of a Force Generating Planar Four-Bar Mechanism Including Dynamic Effects Mechanical Engineering 2001-12-10
Ruppert, David Strater Design of a Robotic Equine Forelimb for Testing Load-Bearing Rehabilitative Devices Mechanical Engineering 2003-02-05
Rusovici, Razvan Modeling of Shock Wave Propagation and Attenuation in Viscoelastic Structures Mechanical Engineering 1999-09-30
Russell, Jason Bradley Investigation of the Effect of Catalyst Layer Composition on the Performance of PEM Fuel Cells Mechanical Engineering 2003-08-14
Russell, Larry C Stress concentration factors of stepped structures and shouldered shafts under combined loading Mechanical Engineering 2009-01-10
Russler, Patrick M. An investigation of the surge behavior of a high-speed ten-stage axial flow compressor Mechanical Engineering 2009-09-19
Ryman, John Franklin Prediction of Inlet Distortion Transfer Through the Blade Rows in a Transonic Axial Compressor Mechanical Engineering 2003-06-12
Saad, Zoubeir Simulation of temperature history and estimation of thermal properties of food materials during freezing Mechanical Engineering 2009-02-13
Sabnavis, Giridhar Test Results for Shaft Tracking Behavior of Pads in a Spherical Pivot Type Tilting Pad Journal Bearing Mechanical Engineering 2005-05-11
Sabourin, Emmanuel Adaptive high-precision exterior, high-speed interior, layered manufacturing Mechanical Engineering 2009-02-13
Sacarcelik, Ozer Acoustic Devices for the Active & Passive Control of Sound in a Payload Compartment Mechanical Engineering 2004-05-24
Saccoccio, Gregory Nicholas Error modeling of the carpal wrist Mechanical Engineering 2009-02-13
Salehian, Armaghan Micropolar Continuum Modeling of Large Space Structures with Flexible Joints and Thermal Effects: Theory and Experiment Mechanical Engineering 2008-02-10
Salem, Khlifi Analysis of tilting-pad oil seals for high pressure centrifugal compressors Mechanical Engineering 2012-11-21
Salerno, Robert James Positional control strategies for a modular, long-reach, truss-type manipulator Mechanical Engineering 2008-06-06
Samal, Nihar Ranjan A wind tunnel facility for the evaluation of a land-based gas turbine diffuser-collector Mechanical Engineering 2011-12-20
Sanchez, Maria Cristina Optical Analysis of a Linear-Array Thermal Radiation Detector for Geostationary Earth Radiation Budget Applications Mechanical Engineering 1998-03-06
Sanchez, Maria Cristina Uncertainty and Confidence Intervals of the Monte Carlo Ray-Trace Method in Radiation Heat Transfer Mechanical Engineering 2002-12-06
Sanders, Paul Alan Effects of Louver Length and Vortex Generators to Augment Tube Wall Heat Transfer in Louvered Fin Heat Exchangers Mechanical Engineering 2005-09-25
Sanders, Darius Demetri An Investigation of Controlled Oscillations in a Plasma Torch for Combustion Enhancement Mechanical Engineering 2005-11-14
Sanders, Darius Demetri CFD Modeling of Separation and Transitional Flow in Low Pressure Turbine Blades at Low Reynolds Numbers Mechanical Engineering 2009-10-18
Santa Maria Iruzubieta, Maria A Radiative Model for the Study of the Feedback Mechanism between Photolytic Aerosols and Solar Radiation Mechanical Engineering 2001-12-13
Santavicca, Jeffery W Fluid mechanics tutorials in GKS supported FORTRAN Mechanical Engineering 2009-09-12
Sarkar, Saugata Sarkar Photothermal and Photochemical Tumor Response to Carbon Nanotube Mediated Laser Cancer Therapy Mechanical Engineering 2010-09-19
Sarles, Stephen Andrew Active Rigidization of Carbon Fiber Reinforced Composites via Internal Resistive Heating Mechanical Engineering 2006-03-28
Sarles, Stephen Andrew Physical Encapsulation of Interface Bilayers Mechanical Engineering 2010-04-17
Sarlo, Rodrigo Airflow sensing with arrays of hydrogel supported artificial hair cells Mechanical Engineering 2015-01-27
Saunders, Christopher A. Noise Reduction in an Axisymmetric Supersonic Aircraft Inlet using Trailing Edge Blowing Mechanical Engineering 1998-01-21
Saunders, William R On the use of modern control theory for active structural acoustic control Mechanical Engineering 2008-07-28
Savransky, Max Numerical Simulations of Thermo-Fluid Phenomena in Microwave Heated Packed and Fluidized Beds Mechanical Engineering 2003-11-20
Savransky, Max A study of transient heat conduction and thermal noise in an Earth radiation budget radiometer Mechanical Engineering 2008-12-17
Sayar, Sepideh Heat Transfer During Melting and Solidification in Heterogeneous Materials Mechanical Engineering 2000-12-15
Scardina, Michael Thomas Optimal synthesis of force-generating planar four-link mechanisms Mechanical Engineering 2008-09-18
Scattergood, Thomas R A dual-junction thermocouple probe for compensated temperature measurement in reacting flows Mechanical Engineering 2009-09-12
Schiller, Ean H. Heat Engine Driven by Shape Memory Alloys: Prototyping and Design Mechanical Engineering 2002-09-25
Schiller, Noah Harrison Design and Validation of a Proportional Throttle Valve System for Liquid-Fuel Active Combustion Control Mechanical Engineering 2003-10-14
Schiller, Noah Harrison Decentralized control of sound radiation from periodically stiffened panels Mechanical Engineering 2007-12-18
Schmidt, Gerald Application of the finite element method in high-side gondola rail car design Mechanical Engineering 2012-11-20
Schmiel, David R Effects of variations in controller gains on the dynamics of magnetic bearings Mechanical Engineering 2008-11-18
Schneck III, William Carl Estimation of the Real Area of Contact in Sliding Systems Using Thermal Measurements Mechanical Engineering 2009-09-30
Schneider, Shawn Patrick Cost Effective Rollover Mitigation Strategy Mechanical Engineering 2010-04-05
Schorn, Scott A The evaluation of turbulence models using tensor visualization techniques Mechanical Engineering 2008-12-30
Schrock, Eric V A PHIGS-based spreadsheet for conceptual design Mechanical Engineering 2009-10-24
Schroeder, Matthew O Biotribology :articular cartilage friction, wear, and lubrication Mechanical Engineering 2008-12-30
Schultze, John Francis Evaluation of analytical and experimental methods to predict constrained layer damping behavior Mechanical Engineering 2009-09-12
Schwartz, Jeffrey R. An Experimental and Analytical Investigation of Dynamic Flow Response of a Fan Rotor with Distorted Inlet Flow Mechanical Engineering 1999-08-20
Schwartz, Kyle Wayne Acoustic Characterization and Preliminary Noise Control of Pneumatic Percussion Tools Mechanical Engineering 2006-08-24
Scott, Emily A Recognition of aerospace acoustic sources using advanced pattern recognition techniques Mechanical Engineering 2010-03-02
Scrittore, Joseph Experimental Study of the Effect of Dilution Jets on Film Cooling Flow in a Gas Turbine Combustor Mechanical Engineering 2008-06-30
Sebesta, Christopher James Modeling the Effect of Particle Diameter and Density on Dispersion in an Axisymmetric Turbulent Jet Mechanical Engineering 2012-04-27
Sedalor, Teddy Heat Transfer and Flow Characteristic Study in a Low Emission Annular Combustor Mechanical Engineering 2010-04-29
Seigler, Thomas Michael A Comparative Analysis of Air-inflated and Foam Seat Cushions for Truck Seats Mechanical Engineering 2002-05-22
Seigler, Thomas Michael Dynamics and Control of Morphing Aircraft Mechanical Engineering 2005-08-16
Sen, Debamoy Coupled Field Modeling of Gas Tungsten Arc Welding Mechanical Engineering 2012-07-17
Senger, Randall Donn Validation of ADVISOR as a Simulation Tool for a Series Hybrid Electric Vehicle Using the Virginia Tech FutureCar Lumina Mechanical Engineering 1997-09-18
Servaites, Joseph Charles Computer Aided Analysis of Smoke Stack Designs Mechanical Engineering 1998-07-18
Sesler, Josh J Implementation of Refractory Foam Technology for Silencing Small IC Engines Mechanical Engineering 2005-10-21
Sethapati, Vivek Venkata Computational Fluid Flow Analysis of the Enhanced-Once through Steam generator Auxiliary feedwater system Mechanical Engineering 2011-05-12
Sewall, Evan Andrew Development of a Thermal Management Methodology for a Front-End DPS Power Supply Mechanical Engineering 2002-10-25
Sewall, Evan Andrew Large Eddy Simulations of Flow and Heat Transfer in the Developing and 180° Bend Regions of Ribbed Gas Turbine Blade Internal Cooling Ducts with Rotation - Effect of Coriolis and Centrifugal Buoyancy Forces Mechanical Engineering 2005-12-01
Sexton, Wayne Randolph A Method to Control Turbofan Engine Starting by Varying Compressor Surge Valve Bleed Mechanical Engineering 2001-05-22
Shaffer, Damon M. Reynolds stress measurements downstream of a turbine cascade Mechanical Engineering 2013-11-15
Shah, Anant Pankaj Development and application of a dispersed two-phase flow capability in a general multi-block Navier Stokes solver Mechanical Engineering 2005-12-13
Shah, Samir Harshadrai Computer aided analyses of symmetrically loaded thin cylindrical shell using transfer matrix method Mechanical Engineering 2008-10-02
Shahidi, Parham Fuzzy Analysis of Speech Metrics to Estimate Crew Alertness Mechanical Engineering 2011-04-12
Shannon, Colleen Elizabeth Recurrent Gait of Anthropomorphic, Bipedal Walkers Mechanical Engineering 2003-05-29
Sharkasi, Adam Tawfik Stereo Vision Based Aerial Mapping Using GPS and Inertial Sensors Mechanical Engineering 2008-05-06
Sheldon, Karl Edward Analysis Methods to Control Performance Variability and Costs in Turbine Engine Manufacturing Mechanical Engineering 2001-05-07
Shevock, Bryan Wesley System Level Modeling of Thermal Transients in PEMFC Systems Mechanical Engineering 2008-01-30
Shimp III, Samuel Kline Vehicle Sprung Mass Parameter Estimation Using an Adaptive Polynomial-Chaos Method Mechanical Engineering 2008-04-30
Shoemaker, Adam Kenneth Nonholonomic Control Utilizing Kinematic Constraints of Differential and Ackermann Steering Based Platforms Mechanical Engineering 2016-12-08
Shooter, Steven B Information modeling in mechanical design :with application to cam mechanical design Mechanical Engineering 2008-06-06
Shooter, Steven B Conceptual manipulator design for limited access workspaces Mechanical Engineering 2009-05-09
Showalter, Mark Henry Work Space Analysis and Walking Algorithm Development for A Radially Symmetric Hexapod Robot Mechanical Engineering 2008-08-20
Shukla, Nitin Heat Transport across Dissimilar Materials Mechanical Engineering 2009-05-20
Siddens, Aaron Jeffrey A Predictive Methodology for Soft Impact Damage in Jet Engines Incorporating Hybrid Composite Structures Mechanical Engineering 2012-04-09
Sides, Jonathan Drapala Low Frequency Modeling and Experimental Validation of Passive Noise Attenuation in Ear Defenders Mechanical Engineering 2004-08-20
Siegel, Nathan Phillip Development and validation of a computational model for a proton exchange membrane fuel cell Mechanical Engineering 2004-01-20
Siethoff, Eric Ten A Formulation for Updating Finite Element Models Through Consistent Use of Laser Vibrometer Data Mechanical Engineering 1998-04-28
Silva, Luciano Afonso Internal Variable and Temperature Modeling Behavior of Viscoelastic Structures -- A Control Analysis Mechanical Engineering 2003-08-25
Simmers, Jr., Garnett E. Impedance-Based Structural Health Monitoring to Detect Corrosion Mechanical Engineering 2005-05-12
Simmons, Stephen Gordon The simultaneous measurement of time-resolved surface heat flux and freestream turbulence at a stagnation point Mechanical Engineering 2009-06-11
Simon, David E. Experimental Evaluation of Semiactive Magnetorheological Primary Suspensions for Heavy Truck Applications Mechanical Engineering 1998-09-07
Simon, David E. An Investigation of the Effectiveness of Skyhook Suspensions for Controlling Roll Dynamics of Sport Utility Vehicles Using Magneto-Rheological Dampers Mechanical Engineering 2001-12-03
Simon, Joshua Cameron Response and Failure of Adhesively Bonded Automotive Composite Structures under Impact Loads Mechanical Engineering 2004-09-01
Singer, Richard Tompkins An experimental examination of the effect of trailing edge injection on the aerodynamic performance of gas turbine blades Mechanical Engineering 2012-09-08
Singh, Samir Pressure modeling and extension of force modeling in a Bristol H25A air conditioner compressor Mechanical Engineering 2009-01-10
Singh, Kanwar Bharat Development of an Intelligent Tire Based Tire - Vehicle State Estimator for Application to Global Chassis Control Mechanical Engineering 2012-01-19
Sirk, Timothy Numerical Simulation of Nanoscale Flow: A Molecular Dynamics Study of Drag Mechanical Engineering 2006-05-04
Sirk, Timothy Wayne A Molecular Dynamics Study on the Interaction of Tea Catechins and Theaflavins with Biological Membranes Mechanical Engineering 2009-04-17
Skelly, Michael J An experimental investigation of glass breakage in compartment fires Mechanical Engineering 2009-04-25
Skinner, Daniel B Microwave heating of a coating on a temperature-sensitive substrate Mechanical Engineering 2009-03-14
Slaughter, Raymond L. The Effects of Increased Ignition Energy on Cold Start Hydrocarbon Emissions Mechanical Engineering 1998-09-10
Slaughter, Derek Emerson Strip Crown Prediction: Developing a Refined Dynamic Roll-Stack Model for the Hot Rolling Process Mechanical Engineering 2009-08-06
Slominski, Eric Christopher A Prototype Device for Isolating and Wirelessly Transmitting Neural Action Potentials Mechanical Engineering 2003-12-18
Small, Matthew David Frequency Domain Methods for Predicting the Transport of Non-Uniform Flow Through Turbomachinery Compressors Mechanical Engineering 2001-05-07
Small, Mauro Luis Non-Iterative Technique for Balancing an Air Distribution System Mechanical Engineering 2002-03-22
Smith, Bradley R. Neural Network Enhancement of Closed-Loop Controllers for Ill-Modeled Systems with Unknown Nonlinearities Mechanical Engineering 1997-12-02
Smith, Dwight E. An Investigation of Heat Transfer Coefficient and Film Cooling Effectiveness in a Transonic Turbine Cascade Mechanical Engineering 1999-07-26
Smith, Amie Michelle Prediction and Measurement of Thermal Exchanges within Pyranometers Mechanical Engineering 1999-11-08
Smith, G. Clark Optimum Actuator Grouping in Feedforward Active Control Applications Mechanical Engineering 1994-10-06
Smith, Clayton L. Analytical Modeling and Equivalent Electromechanical Loading Techniques for Adaptive Laminated Piezoelectric Structures Mechanical Engineering 2001-02-06
Smith, Sandra Kay Theoretical Feasibility Study of Preferential Hyperthermia Using Silicon Carbide Inserts Mechanical Engineering 2004-05-14
Smith, Dwight Eldridge An Application of Wavelet Techniques to Bi-directionality in the Monte Carlo Ray Trace Environment Mechanical Engineering 2004-03-23
Smith, Benjamin Andrew Determination of Normal or Abnormal Gait Using a Two-Dimensional Video Camera Mechanical Engineering 2007-04-20
Smith, Jerome P Active control of broadband acoustic radiation from structures Mechanical Engineering 2009-01-24
Smith, J. Christopher Ceramic lubrication :vapor phase tribopolymerization and a new high speed, high load pin-on-disk machine Mechanical Engineering 2009-03-24
Smith, Hurtford Improving the Quality of Terrain Measurement Mechanical Engineering 2009-05-07
Smith, Kenneth Wayne Fighter Aircraft Synthesis/Design Optimization Mechanical Engineering 2009-05-15
Smith, Benjamin A Model Free Human Pose Estimation with Application to the Classification of Abnormal Human Movement and the Detection of Hidden Loads Mechanical Engineering 2010-07-22
Smith, Charles E Intrinsic Quantum Thermodynamics: Application to Hydrogen Storage on a Carbon Nanotube and Theoretical Consideration of Non-Work Interactions Mechanical Engineering 2012-02-18
Smith, Colin Frederick Jellyfish Inspired Underwater Systems and Technologies Mechanical Engineering 2011-12-02
Snyder, Thomas D The effects of variability on damage identification with inductive learning Mechanical Engineering 2009-04-18
Sodano, Henry Angelo Macro-Fiber Composites for Sensing, Actuation and Power Generation Mechanical Engineering 2003-08-01
Sodano, Henry Angelo Development of Novel Eddy Current Dampers for the Suppression of Structural Vibrations Mechanical Engineering 2005-05-12
Sole, Joshua David Investigation of Water Transport Parameters and Processes in the Gas Diffusion Layer of PEM Fuel Cells Mechanical Engineering 2008-05-04
Sole, Joshua David Investigation of Novel Gas Diffusion Media for Application in Pem Fuel Cell Ribbon Assemblies Mechanical Engineering 2005-12-22
Son, Seyul Nonlinear Electromechanical Deformation of Isotropic and Anisotropic Electro-Elastic Materials Mechanical Engineering 2011-08-09
Song, Kyongchan Development of the Velocity Transformation Function of Damped Flat Shell Finite Element for the Experimental Spatial Dynamics Modeling Mechanical Engineering 2000-12-13
Song, Bo Experimental and Numerical Investigations of Optimized High-Turning Supercritical Compressor Blades Mechanical Engineering 2003-11-24
Song, Tao The optimal design of transducers for active control of multiple-frequency structural sound radiation Mechanical Engineering 2007-08-27
Song, Xubin Design of Adaptive Vibration Control Systems with Applicaion to Magneto-Rheological Dampers Mechanical Engineering 1999-11-12
Song, Keun Min Wall Modeled Large-Eddy Simulations in Rotating Systems for Applications to Turbine Blade Internal Cooling Mechanical Engineering 2012-01-30
Soper, Robert Randall Synthesis of planar four-link mechanisms for force generation Mechanical Engineering 2005-10-07
Sorensen, Ira Joseph Analytical and Experimental Characterization of a Linear-Array Thermopile Scanning Radiometer for Geo-Synchronous Earth Radiation Budget Applications Mechanical Engineering 1998-12-05
Sorensen, Ira Joseph Design and analysis of radiometric instruments using high-level numerical models and genetic algorithms Mechanical Engineering 2002-12-06
Southern, Brian Mitchell Design and Characterization of Tunable Magneto-Rheological Fluid-Elastic Mounts Mechanical Engineering 2008-05-12
Spagnuolo, Antonio A study of reciprocating compressor finger valve dynamics Mechanical Engineering 2013-11-15
Spalt, Taylor B Background Noise Reduction in Wind Tunnels using Adaptive Noise Cancellation and Cepstral Echo Removal Techniques for Microphone Array Applications Mechanical Engineering 2010-07-29
Sparrer, John David Display of finite element beam stresses Mechanical Engineering 2010-10-13
Sperry, Brian James Complex Bogie Modeling Incorporating Advanced Friction Wedge Components Mechanical Engineering 2009-05-20
Spring, Malcolm Robert A comparative determination of the suitability of some of the so-called "lubricating aids" for industrial use Mechanical Engineering 2010-06-08
Sreedhran, Sai Shrinivas Syngas ash deposition for a three row film cooled leading edge turbine vane Mechanical Engineering 2010-08-05
Stafne, Michael Allan An Experimental Evaluation of the Experimental Spatial Dynamics Modeling (ESDM) Technique Mechanical Engineering 1998-04-21
Staley, Alan Joseph A Finite Difference Approach to Modeling High Velocity/Variable Loads using the Timoshenko Beam Model Mechanical Engineering 2011-04-01
Stasiunas, Eric Carl Using Vibration Analysis to Determine Refrigerant Levels In an Automotive Air Conditioning System Mechanical Engineering 2002-06-19
Stastny, Jeffrey Allen Time domain reflectometry (TDR) techniques for the design of distributed sensors Mechanical Engineering 2009-09-12
Staton, JoAnna Christen Heat and Mass Transfer Characteristics of Desiccant Polymers Mechanical Engineering 1998-04-16
Stebar, Russell Ford The effect of multiple carburetors and a racing type camshaft on the performance of a spark ignition engine Mechanical Engineering 2010-02-23
Steets, Jennifer Maria A Multibody Dynamics Approach to the Modeling of Friction Wedge Elements for Frieght Train Suspensions Mechanical Engineering 2007-05-24
Steika, Nils A. A Comparison of the Wear Resistance of Normal, Degenerate, and Repaired Human Articular Cartilage Mechanical Engineering 2004-11-11
Stein, S. C Modelling of the filament-winding fabrication process Mechanical Engineering 2009-03-14
Stenzler, Joshua Saul Impact Mechanics of PMMA/PC Multi-Laminates with Soft Polymer Interlayers Mechanical Engineering 2009-12-14
Stephan, Ryan Adam Heat Transfer Measurements and Optimization Studies Relevant to Louvered Fin Compact Heat Exchangers Mechanical Engineering 2002-08-22
Sterling, John Anthony Influence of Induced Unbalance on Subsynchronous Vibrations of an Automotive Turbocharger Mechanical Engineering 2009-07-13
Stewart, Morgan Eugene Validation of a Simplified Building Cooling Load Model Using a Complex Computer Simulation Model Mechanical Engineering 2001-05-23
Stewart, Shannon Thomas Spectral analysis for rod formation dynamics Mechanical Engineering 2008-12-17
Stewart, Kelley Christine Quantitative Hydrodynamics Analysis of Left Ventricular Diastolic Dysfunction using Color M-Mode Echocardiography Mechanical Engineering 2008-10-22
Stewart, Kelley Christine Hydrodynamics of Cardiac Diastole Mechanical Engineering 2011-04-13
Stewart, William Elliott A Response Surface Exit Crown Model Built from the Finite Element Analysis of a Hot-Rolling Mill Mechanical Engineering 2011-10-17
Stiles, Peter A. Improvement of structural dynamic models via system identification Mechanical Engineering 2012-08-01
Stinnett, William A. Thermal Management of Power Electronic Building Blocks Mechanical Engineering 1999-03-01
Stitzel, Sarah M. Flow Field Computations of Combustor-Turbine Interactions in a Gas Turbine Engine Mechanical Engineering 2001-01-19
Stitzel, Joel D. The Role of Local Material Properties in Modeling Fracture Tolerance of the Human Thorax Mechanical Engineering 2003-09-22
Stoakes, Preston John Simulation of Airflow and Heat Transfer in Buildings Mechanical Engineering 2009-11-13
Stouffer, Scott David The effect of flow structure on the combustion and heat transfer in a scramjet combustor Mechanical Engineering 2007-08-08
Strean, R. Flynt Characterization of laser noise in free-free beam structures using a Scanning Laser Doppler Vibrometer Mechanical Engineering 2009-02-13
Stubbs, Matthew D. Kinematic Design and Analysis of a Morphing Wing Mechanical Engineering 2003-12-09
Studley, Allison F Numerical Modeling of Air-Water Flows in Bubble Columns and Airlift Reactors Mechanical Engineering 2010-12-21
Stuede, Andreas Development of an object-oriented graphical user interface for an aircraft engine cycle analysis program Mechanical Engineering 2009-01-24
Stulce, John R. Conceptual Design and Simulation of a Multibody Passive-Legged Crawling Vehicle Mechanical Engineering 2002-04-26
Subramaniam, Mahesh Kumar A computer implementation of the static and dynamic analysis of induced strain actuated beams Mechanical Engineering 2009-01-24
Subramanian, Anuj Mechanical Design Desktop for Machine Elements Mechanical Engineering 2000-09-01
Sumali, Hartono A New Adaptive Array of Vibration Sensors Mechanical Engineering 1997-07-03
Sumali, Hartono Demonstration of active structural acoustic control of cylinders Mechanical Engineering 2010-05-11
Summers, Patrick Timothy Predicting Compression Failure of Fiber-reinforced Polymer Laminates during Fire Mechanical Engineering 2010-05-14
Sumner, Mark David Development of an ATV-Based Remote-Operated Sensor Platform Mechanical Engineering 2010-05-13
Sun, Fanping Piezoelectric active sensor and electric impedance approach for structural dynamic measurement Mechanical Engineering 2008-08-29
Sundaram, Narayan Electrokinetically Driven Mixing in a Microchamber for Lab-on-a-Chip Applications Mechanical Engineering 2003-12-11
Sundaram, Narayan Effects of Surface Conditions on Endwall Film-Cooling Mechanical Engineering 2007-04-20
Sundaresan, Vishnu Baba Biological Ion Transporters as Gating Devices for Chemomechanical and Chemoelectrical Energy Conversion Mechanical Engineering 2007-05-25
Sutton, Daniel Improved Reduced Order Modeling Strategies for Coupled and Parametric Systems Mechanical Engineering 2005-08-19
Swanson, Erik Evan Design and Evaluation of an Automated Experimental Test Rig for Determination of the Dynamic Characteristics of Fluid-Film Bearings Mechanical Engineering 1998-08-07
Swanson, Erik Evan Evaluation of the VPI & SU fluid film bearing test rig Mechanical Engineering 2009-09-12
Swantek, Steven David An Optical Method of Strain Measurement in the Split Hopkinson Pressure Bar Mechanical Engineering 2000-08-23
Swisher, Stacey Elaine Time-resolved heat flux measurements of the turbulent junction vortex system Mechanical Engineering 2009-10-31
Sykes, David Michael Design and Evaluation of a Lean-Premixed Hydrogen Injector with Tangential Entry in a Sector Combustor Mechanical Engineering 2007-04-15
Tadesse, Yonas Tegegn Creating Human-Like Facial Expressions Utilizing Artificial Muscles and Skin Mechanical Engineering 2009-12-18
Takamuku, Kohei Analysis of Flow and Heat Transfer in the U.S. EPR Heavy Reflector Mechanical Engineering 2008-12-19
Talluri, Srikrishna Pretreatment of Small Four-Stroke Engine Components for No-Oil Hot Tests Mechanical Engineering 2000-12-11
Tamaddoni, Seyed Hossein Optimal Vehicle Stability Control with Driver Input and Bounded Uncertainties Mechanical Engineering 2011-02-18
Tan, Honghui Performance Modeling and Efficiency Analysis for a Piezohydraulic Pump with Active Valves Mechanical Engineering 2002-12-17
Tang, Yun-chung Motor simulation and parameter identification in a reciprocating mechanism Mechanical Engineering 2009-10-31
Tanner, Edward Troy Combined Shock and Vibration Isolation Through the Self-Powered, Semi-Active Control of a Magnetorheological Damper in Parallel with an Air Spring Mechanical Engineering 2003-11-12
Tappert, Peter M Damage identification using inductive learning Mechanical Engineering 2009-05-09
Tarazaga, Pablo Alberto Model Updating Using a Quadratic Form Mechanical Engineering 2004-07-26
Tarazaga, Pablo Alberto Dynamics and Control of a Pressurized Optical Membranes Mechanical Engineering 2009-08-19
Tavakkoli, Shahriar Shape design using intrinsic geometry Mechanical Engineering 2005-09-20
Taylor, Benjamin Paul Experimental Evaluation and Semi- Empirical Modeling of the Tractive Performance of Rigid and Flexible Wheels on Lunar Soil Simulant Mechanical Engineering 2009-07-13
Teaters, Lindsey Claire A Computational Study of the Hydrodynamics of Gas-Solid Fluidized Beds Mechanical Engineering 2012-06-22
Templeton, Brian Andrew A Polynomial Chaos Approach to Control Design Mechanical Engineering 2009-08-31
Tenga, Ryan Richard Development of an Endoscope Propulsion System to Aid in the Colonoscopy Procedure Mechanical Engineering 2008-01-07
Tennant, Mark Harris Near-wall similarity in three-dimensional turbulent boundary layers. Mechanical Engineering 2010-07-15
Tentor, Lawrence B. Characterization of an Electromagnetic Tuned Vibration Actuator Mechanical Engineering 2002-05-27
Tentor, Lawrence B. Position and strain feedback control for shaping an active truss Mechanical Engineering 2009-03-24
Terwelp, Christopher Rome Remote Control of Hydraulic Equipment for Unexploded Ordnance Remediation Mechanical Engineering 2003-05-07
Thawley, Scott Spatio-temporal Characteristics of a Spray from a Liquid Jet in Crossflow Mechanical Engineering 2006-02-19
Thayer, Nicholas D Towards a Human-like Robot for Medical Simulation Mechanical Engineering 2011-09-16
Thiagarajan, Manoharan A Design Study of Single-Rotor Turbomachinery Cycles Mechanical Engineering 2004-08-17
Thomas, Shajan A Design of a Teleoperated Rock Sampling System Mechanical Engineering 2011-09-06
Thomas, James Emory Design of a high-speed turbomachinery test cell and components. Mechanical Engineering 2010-07-28
Thompson, Swen Analysis of the Dynamic Interferences between the Stator and Rotor of a Refrigeration Compressor Motor Mechanical Engineering 1998-07-17
Thompson, Matthew Thomas Design of a Cyclic Sliding, Dynamically Loaded Wear Testing Device for the Evaluation of Total Knee Replacement Materials Mechanical Engineering 2001-08-06
Thompson, Elizabeth Danielle Study of Forces and Dynamic Coefficients in Whirling and Eccentric Labyrinth Seals Using ANSYS-CFX Mechanical Engineering 2009-05-07
Thompson, Andrew Capers Investigation and Simulation of Ion Flow Control over a Flat Plate and Compressor Cascade Mechanical Engineering 2009-05-21
Thompson, Christopher David An analytical and experimental investigation of respiratory dynamics using P/D control and carbon dioxide feedback Mechanical Engineering 2012-06-10
Thrift, Alan Albright Aerodynamic Force and Pressure Loss Measurements on Low Aspect Ratio Pin Fin Arrays Mechanical Engineering 2007-02-09
Thum, Tuck Foo Oxygen transfer in recirculating flow Mechanical Engineering 2012-11-17
Tidwell, Paul H. Wrapping CAM mechanisms Mechanical Engineering 2006-08-14
Tijiboy, Jose Carlos Steady and Transient Analysis of Flow and Heat Transfer in SPND Assembly Mechanical Engineering 2008-12-17
Tilahun, Muluken Experimental Investigation of Hyperbolic Heat Transfer in Heterogeneous Materials Mechanical Engineering 1998-01-20
Tinetti, Ana Fiorella On the Use of Surface Porosity to Reduce Wake-Stator Interaction Noise Mechanical Engineering 2001-09-28
Tira, Nour E. A study of the thermal and optical characteristics of radiometric channels for earth radiation budget applications Mechanical Engineering 2007-05-22
Tjung, Jie Wen Projection, design, and representation of curves on B-spline surfaces Mechanical Engineering 2009-03-04
Toffin, Eric Active control of a coupled plate-cylinder system Mechanical Engineering 2009-06-16
Tordonato, David Sebastian The Effects of Freezing on the Mechanical Properties of Articular Cartilage Mechanical Engineering 2003-04-23
Torok, Matthew M. Autonomous Sample Collection Using Image-Based 3D Reconstructions Mechanical Engineering 2012-05-03
Tran, Kathleen One Dimensional Analysis Program for Scramjet and Ramjet Flowpaths Mechanical Engineering 2011-01-08
Tripathy, Bhawani Sankar A new approach to ceramic lubrication : tribopolymerization Mechanical Engineering 2007-08-03
Tripathy, Bhawani Sankar Infrared microscope studies of surface temperatures produced by friction with graphite-epoxy and carbon-PEEK composites Mechanical Engineering 2009-10-22
Tritt, Benjamin R Tribopolymerization :ceramic lubrication under high loads and high speeds Mechanical Engineering 2009-01-10
Trout, Joseph Ewell Trajectory Tracking of a Statically-stable Biped with Two Degrees of Freedom Mechanical Engineering 2003-12-03
Tu, Yifeng Multiple Reference Active Noise Control Mechanical Engineering 1997-03-25
Tu, Chihyung Computer-aided design software for rotor dynamics analysis Mechanical Engineering 2009-07-10
Tuzcu, Ilhan Dynamics and Control of Flexible Aircraft Mechanical Engineering 2002-01-07
Tweedie, Sarah Experimental Investigation of Flow Control Techniques To Reduce Hydroacoustic Rotor-Stator Interaction Noise Mechanical Engineering 2006-10-13
Tweedy, Phillip Analysis of Hybrid Electric Autonomous Tactical Support System Mechanical Engineering 2011-10-05
Tyberg, Justin Local Adaptive Slicing for Layered Manufacturing Mechanical Engineering 1998-02-16
Typrin, Marcello IMTS (Intelligent Monitoring and Trending System)a PC-based monitoring, evaluation and trending system for rotating machinery Mechanical Engineering 2008-12-30
Uhorchak, R. Steven An object-oriented class library for the creation of engineering graphs Mechanical Engineering 2009-04-25
Umsrithong, Anake Deterministic and Stochastic Semi-Empirical Transient Tire Models Mechanical Engineering 2012-02-21
Vakil, Sachin Suresh Flow and Thermal Field Measurements in a Combustor Simulator Relevant to a Gas Turbine Aero-Engine Mechanical Engineering 2002-12-20
Valentino, Jeffrey Joseph Tribopolymerization: Anti-Wear Behavior of New High Temperature Additive Classes Mechanical Engineering 2000-04-04
Van Covern, David Burns Collaborative Tarrget Localization and Inspection Using a Heterogeneous Team of Autonomous Vehicles Mechanical Engineering 2007-12-05
Van Sintern, Wolff H Investigation of suction recirculation in rocket pump inducers Mechanical Engineering 2008-08-29
VandenBerghe, Terrance Michael Heat transfer from in-line and perpendicular arrangements of cylinders in steady and pulsating crossflow Mechanical Engineering 2012-11-14
Vandeputte, Thomas William Effects of Flow Control on the Aerodynamics of a Tandem Inlet Guide Vane Mechanical Engineering 2000-01-21
Varma, Nitesh Secure Network-Centric Application Access Mechanical Engineering 1998-12-18
Vaudrey, Michael Allen Adaptive Control Methods for Non-Linear Self-Excited Systems Mechanical Engineering 2001-09-07
Vaudrey, Michael A A novel approach to multiple reference frequency domain adaptive control Mechanical Engineering 2008-08-29
Vaughan, Mark Edward The Design, Fabrication, and Modeling of a Piezoelectric Linear Motor Mechanical Engineering 2001-12-28
Vega, Thomas Quantification of the Fire Thermal Boundary Condition Mechanical Engineering 2012-04-10
Vemishetty, Kalyanramu Embedded Wireless Data Acquisition System Mechanical Engineering 2005-12-20
Venezia, Jr., James J Vibration Modeling and Experimental Analysis of a Locomotive Cab Mechanical Engineering 1998-07-12
Venter, Gerhardus Sensitivity analysis with respect to elastic boundary conditions and laser spatial variables within experimental spatial dynamic modeling Mechanical Engineering 2009-01-10
Veyret-Abran, Christophe Friction and degradation of rubber coatings under fretting conditions Mechanical Engineering 2010-07-21
Villa, Margarita Maria Tailoring the Geometry of Micron Scale Resonators to Overcome Viscous Damping Mechanical Engineering 2009-05-07
Villarreal, Daniel Christopher Digital Fuel Control for a Lean Premixed Hydrogen-Fueled Gas Turbine Engine Mechanical Engineering 2009-09-08
Villeneuve, Pierre V. A Numerical Study of the Sensitivity of Cloudy-Scene Bidirectional Reflectivity Distribution Functions to Variations in Cloud Parameters Mechanical Engineering 1998-07-12
Villeneuve, Pierre V A parametric study of the validity of the weak-line and strong-line limits of infrared band absorption Mechanical Engineering 2009-03-12
Villiger, Carmel G Investigations into transient respiratory control using the work rate of breathing and a non-linear breather Mechanical Engineering 2009-02-13
Vipperman, Jeffrey S. Adaptive feedforward control of broadband structural vibration Mechanical Engineering 2008-12-30
Viswanathan, Aroon Kumar Detached Eddy Simulation of Turbulent Flow and Heat Transfer in Turbine Blade Internal Cooling Ducts Mechanical Engineering 2006-08-04
Vlachakis, Vasileios N Turbulent Characteristics in Stirring Vessels: A Numerical Investigation Mechanical Engineering 2006-08-17
Voigt, Elizabeth Elena Hydrodynamic Characterization of an Arterial Flow Bioreactor Mechanical Engineering 2010-07-19
Voorhies, Katherine Desiree Static and Dynamic Stress/Strain Properties for Human and Porcine Eyes Mechanical Engineering 2003-04-24
Voruganti, Ravinder Srinivas Robot system characterization : error modeling, identification, analysis, and minimization Mechanical Engineering 2005-10-26
Voruganti, Ravinder Srinivas Symbolic and computational conjugate geometry for design and manufacturing applications Mechanical Engineering 2009-03-03
Vujic, Nikola Power Regeneration in Actively Controlled Structures Mechanical Engineering 2002-06-05
Wachsmuth, John Paul Multiple Independent Extrusion Heads for Fused Deposition Modeling Mechanical Engineering 2008-02-09
Wagner, Robert Aeroacoustics of the bifurcated 2D supersonic inlet Mechanical Engineering 2005-10-07
Wakjira, Jillcha Fekadu The VT1 Shape Memory Alloy Heat Engine Design Mechanical Engineering 2001-02-10
Walker, Don Gregory Estimation of Unsteady Nonuniform Heating Rates from Surface Temperature Measurements Mechanical Engineering 1997-11-25
Walker, John Griffith Investigation of induced strain actuator patches implementing modeling techniques and design considerations to reduce critical stress Mechanical Engineering 2009-03-04
Walkup, Michael D A Monte-Carlo optical workbench for radiometric imaging system design Mechanical Engineering 2008-08-29
Wallace, Robert Malcolm Modal Response of a Transonic Fan Blade to Periodic Inlet Pressure Distortion Mechanical Engineering 2003-09-23
Walls, Michael W An experimental determination of the trailing-edge base pressure on blades in transonic turbine cascades Mechanical Engineering 2009-04-07
Walsh, Kevin Eugene An application of relaxation methods to transonic nozzle flow. Mechanical Engineering 2010-07-28
Walsh, Patrick McKay Plug-in Hybrid Electric Vehicle Supervisory Control Strategy Considerations for Engine Exhaust Emissions and Fuel Use Mechanical Engineering 2011-05-10
Walsh, William Scott Effects of Sand Ingestion on the Film-Cooling of Turbine Blades Mechanical Engineering 2005-09-08
Wampler, Steven Glenn Development of a CAD system for automated conceptual design of supersonic aitcraft Mechanical Engineering 2013-02-06
Wang, Xijun Geometric Trimming and Curvature Continuous Surface Blending for Aircraft Fuselage and Wing Shapes Mechanical Engineering 2001-04-09
Wang, Kaihong Vibration Analysis of Cracked Composite Bending-torsion Beams for Damage Diagnosis Mechanical Engineering 2004-12-03
Wang, Bor-Tsuen Active control of sound transmission/radiation from elastic plates using multiple piezoelectric actuators Mechanical Engineering 2005-10-19
Wang, Meng The Integration of State Space into the Dynamic Synthesis/Design and Operational/Control Optimization of a PEMFC System Mechanical Engineering 2008-02-04
Wang, Guozhang A photoelastic study of stress distribution in a spur gear tooth Mechanical Engineering 2010-02-16
Wang, Ya Simultaneous Energy Harvesting and Vibration Control via Piezoelectric Materials Mechanical Engineering 2012-02-13
Wang, Bor-Tsuen A computational approach to the prediction of wheel wear profiles Mechanical Engineering 2012-08-01
Warren, Jeffery Howard A prediction of polymer wear using polymer mechanical properties and surface characterization parameters. Mechanical Engineering 2013-02-07
Warren, Arthur H Propulsion system analysis for conceptual design :drag and losses of nozzles and mixed compression inlets Mechanical Engineering 2009-07-11
Warrington, Thomas Joseph Experiments and simulations of large-angle flexible beam control using an adaptive truss Mechanical Engineering 2009-03-03
Webb, Robert D A literature review of slip ring performance and an evaluation of four lubricants in a slip ring wear application Mechanical Engineering 2010-02-02
Weber, Michael A An Investigation of the Feasibility of Microscale Adaptive Passive Vibration Neutralizers Mechanical Engineering 2002-05-07
Webster, Jonathan Michael A Localization Solution for an Autonomous Vehicle in an Urban Environment Mechanical Engineering 2008-01-08
Webster, Gregory Daniel Modeling of Ethanol Metabolism and Transdermal Transport Mechanical Engineering 2008-06-06
Weckmann, Stephanie Dynamic Electrothermal Model of a Sputtered Thermopile Thermal Radiation Detector for Earth Radiation Budget Applications Mechanical Engineering 1997-08-28
Weekley, Jonathan Gardner Multispectral Imaging Techniques for Monitoring Vegetative Growth and Health Mechanical Engineering 2008-11-17
Weick, Brian L Infrared measurements of surface temperatures during oscillating/fretting contact with ceramics Mechanical Engineering 2009-03-12
Weikert, Wayne Frederick Experimental and analytical modeling of the quasi-steady switching characteristics of a monostable fluid amplifier. Mechanical Engineering 2010-07-07
Weiland, Christopher Modification of Blade-Vortex Interactions Using Leading Edge Blowing Mechanical Engineering 2007-04-15
Weiland, Christopher Jude Characteristics of the High Speed Gas-Liquid Interface Mechanical Engineering 2010-02-08
Weise, Peter Carl Mission-Integrated Synthesis/Design Optimization of Aerospace Subsystems under Transient Conditions Mechanical Engineering 2012-08-22
Wells, Bruce Autonomous Prototype of a Full Dimension Continuous Haulage System Mechanical Engineering 1999-08-04
Wells, James E Interaction of stainless steel threaded fasteners with stainless steel locking inserts Mechanical Engineering 2009-01-10
Westerman, William J Experimental measurement of combustion noise and comparison to a predictive model Mechanical Engineering 2009-03-12
White, Darris L. Statistical Characterization of Vehicle and Track Interaction Using Rail Vehicle Response and Track Geometry Measurments. Mechanical Engineering 1998-06-29
White, Andrew On Implemintation of Loudspeakers for Feedback Control, Open-Air, Active Noise Control Headsets Mechanical Engineering 1999-12-03
White, David Allen Development of a high-speed rotating bar mechanism Mechanical Engineering 2008-12-17
Whittier, William Brooks Kinematic Analysis of Tensegrity Structures Mechanical Engineering 2002-12-02
Wichmann, Mark William A device for the treatment of adult Sleep Apnea Syndrome Mechanical Engineering 2012-11-21
Wicks, Matthew L A modal analysis method for a lumped parameter model of a dynamic fluid system Mechanical Engineering 2009-07-29
Wieczorek, Christopher John Carbon Monoxide Generation and Transport from Compartment Fires Mechanical Engineering 2003-06-10
Wiedmann, Stephen Louis Kinematic Analysis of a Threaded Fastener Assembly Mechanical Engineering 2000-04-12
Wiggins III, Leonard D. Structural Design and Analysis of a Kinematic Mechanism for a Morphing Hyper-Elliptic Cambered Span (HECS) Wing Mechanical Engineering 2004-01-06
Wilkes, Kevin Rotordynamic analysis of circumferentially grooved annular pump seals with turbulent flow and inlet swirl Mechanical Engineering 2008-12-30
Williams, Robert Brett Localized Effects of Piezopolymer Devices on the Dynamics of Inflatable Space-Based Structures Mechanical Engineering 2000-08-15
Williams, Robert Brett Nonlinear Mechanical and Actuation Characterization of Piezoceramic Fiber Composites Mechanical Engineering 2004-04-05
Williams, Alicia Marie Mixing at Low Reynolds Numbers by Vibrating Cantilevered Ionic Polymers Mechanical Engineering 2007-06-27
Williams, Alicia Marie The Hydrodynamics of Ferrofluid Aggregates Mechanical Engineering 2008-11-03
Williams, Edward McRae A model of the formation of a porous fibrous cake Mechanical Engineering 2009-06-16
Williams, Robert L. Synthesis and design of the RSSR spatial mechanism for function generation Mechanical Engineering 2013-03-12
Willis, Christopher Ryan A Kinematic Analysis and Design of a Continuously Variable Transmission Mechanical Engineering 2006-03-31
Wiltgen, Timothy Edward Adaptive Beamforming using ICA for Target Identification in Noisy Environments Mechanical Engineering 2007-05-22
Wirth, Douglas A An experimental investigation of the effect of temporal equivalence ratio fluctuations on NO x emissions in premixed flames Mechanical Engineering 2008-06-06
Wirth, Douglas A Soot formation in vitiated-air diffusion flames Mechanical Engineering 2010-01-12
Wolff, Andrew Vincent Analysis of a Split-Path Gear Train with Fluid-Film Bearings Mechanical Engineering 2004-05-10
Wolff, Andrew Mechanical Properties of Maturing Dystrophic Skeletal Muscle Mechanical Engineering 2007-05-31
Wong, Chee Kiang Intersection of B-spline surfaces by elimination method Mechanical Engineering 2009-03-03
Wood, Eric Jeter Simulated Syngas Ash Deposition on the Leading Edge of a Turbine Vane with Film Cooling Mechanical Engineering 2010-08-23
Woodward, Adam Charles Experimental Analysis of the Effects of the Variation of Drawbar Pull Test Parameters for Exploration Vehicles on GRC-1 Lunar Soil Simulant Mechanical Engineering 2011-06-06
Woon, Christopher Earle The effects of ambient temperature variations on structural dynamic characteristics Mechanical Engineering 2008-12-17
Worley, Marilyn Elizabeth Experimental Study on the Mobility of Lightweight Vehicles on Sand Mechanical Engineering 2007-07-14
Woyak, Scott A. An object-oriented methodology and supporting framework for creating engineering software by dynamic integration Mechanical Engineering 2005-10-26
Woyak, Scott A A motif-like object-oriented interface framework using PHIGS Mechanical Engineering 2009-09-05
Wright, Richard I. A Hierarchical Noise Control System Using Adaptable Tuned Vibration Absorbers Mechanical Engineering 2003-05-01
Wright, Andrew D Acoustic boundary condition estimation in a near-scale gas-turbine combustor Mechanical Engineering 2008-08-22
Wrona, Dan A Dy:YAG coated fiber optic thermal sensor :proof of concept Mechanical Engineering 2010-03-30
Wu, Yingxiang Rapid Prototyping Job Scheduling Optimization Mechanical Engineering 2001-11-29
Wu, Xiaofeng Experimental and Theoretical Study of Microwave Heating of Thermal Runaway Materials Mechanical Engineering 2002-12-23
Wynn, Robert H. The control of flexible structure vibrations using a cantilevered adaptive truss Mechanical Engineering 2005-10-19
Wynn, Carol Jaeger Sensor arrays for the measurement of dispersive, flexural waves in structures for signal-to-noise ratio enhancement and angle of arrival determination Mechanical Engineering 2005-10-26
Wynn, Carol Jaeger An on-line chemistry monitor for boron concentration Mechanical Engineering 2010-10-13
Xue, Zhenyu Particle Image Velocimetry Correlation Signal-to-noise Metrics, Particle Image Pattern Mutual Information and Measurement uncertainty Quantification Mechanical Engineering 2014-08-25
Xue, Song Fan-Shaped Hole Film Cooling on Turbine Blade and Vane in a Transonic Cascade with High Freestream Turbulence: Experimental and CFD Studies Mechanical Engineering 2012-07-24
Yang, Timothy T An experimental investigation of turbine blade tip heat transfer and tip gap flows in the supersonic regime Mechanical Engineering 2009-07-11
Yeo, Siew-Hock Experimental determination of the flow field velocity and strain rate in a laminar opposed flow H2/air diffusion flame, via laser doppler anemometry Mechanical Engineering 2009-02-13
Yoo, Jong Hyun Tribological behavior of unfilled and carbon fiber reinforced polyether ether ketone/polyether imide composites Mechanical Engineering 2008-12-30
Young, Kuao-John A unified approach to the formulation of non-consistent rod and beam mass matrices for improved finite element modal analysis Mechanical Engineering 2008-07-28
Young, David Larry Noise transmission path identification in a reciprocating freon compressor Mechanical Engineering 2009-01-17
Young, Stephen Alexander Multi-level Control Architecture and Energy Efficient Docking for Cooperative Unmanned Air Vehicles Mechanical Engineering 2011-02-09
Young, Taylor Tront Lipid Bilayer Formation in Aqueous Solutions of Ionic Liquids Mechanical Engineering 2012-10-04
Yu, Xianhui Numerical solution of multiple front phase change problems for modeling ice thermal storage systems Mechanical Engineering 2008-06-06
Yuan, Yiqing Jet Fluid Mixing Control Through Manipulation Jet Fluid Mixing Control Through Manipulation of Inviscid Flow Structures Mechanical Engineering 2000-06-22
Zeng, Xiandi The estimation and statistical inferences of the position and orientation of a scanning laser Doppler vibrometer Mechanical Engineering 2008-10-30
Zhang, Xinyu Optimal Geometric Trimming of B-spline Surfaces for Aircraft Design Mechanical Engineering 2005-07-12
Zhang, Xiaodong Modeling of materials with internal variables using a thermomechanical approach Mechanical Engineering 2009-10-31
Zheng, Zhijun The analytical force prediction and dynamic response analysis of the Bristol H25A compressor Mechanical Engineering 2009-01-10
Zhou, Su-Wei Coupled electro-mechanical system modeling and experimental investigation of piezoelectric actuator-driven adaptive structures Mechanical Engineering 2008-06-06
Zhou, Ning Active control of sound transmission through plates in a reverberant environment Mechanical Engineering 2009-01-31
Ziegenmeyer, Jonathan Daniel Estimation of Disturbance Inputs to a Tire Coupled Quarter-car Suspension Test Rig Mechanical Engineering 2007-05-15
Zima, Jr., Andrew David Misalignment Effects of the Self-Tracking Laser Doppler Vibrometer Mechanical Engineering 2001-05-10
Zugel, John Martin Prolog implementation in robot kinematics Mechanical Engineering 2012-09-08
Bolotsky, Max The utilization of aplite in ladle desulfurization of cast iron Metallurgical Engineering 2010-07-07
Braski, David N An x-ray diffraction method for studying small diffusion zones. Metallurgical Engineering 2010-02-16
DeBoskey, Wentzle R. Sigma phase in the ternary systems chromium-cobalt-copper and chromium-manganese-copper Metallurgical Engineering 2013-02-07
Dietrich, Frank E. An X-ray study of the behavior of titanium films on silicon substrates. Metallurgical Engineering 2010-06-12
Fox, Charles Warren Identification of nitrides in type 304 stainless steel Metallurgical Engineering 2013-11-15
Higgins, Jay Patrick Evaluation of susceptibility of AISI 304 to stress-corrosion cracking in terms of crack nucleation and crack propagation Metallurgical Engineering 2013-11-15
Lotts, Adolphus Lloyd An investigation of several variables in the strength of shell molds Metallurgical Engineering 2012-09-08
Yoon, Kap Suk Effect of pre-exposure thermal treatment on susceptibility of type 304 austenitic stainless steel to stress corrosion Metallurgical Engineering 2010-05-04
Duddleston, Khrystyne Noel The effect of carbon addition, pH and Fe concentration of microbial sulfate reduction and the subsequent precipitation of Fe and Mn from acid mine drainage in wetland mesocosms Microbial Ecology 2010-05-11
Arrage, Andrew Anthony Characterization of DNA-repair potential in deep subsurface bacteria challenged by UV light, hydrogen peroxide, and gamma radiation Microbiology 2009-08-18
Boerman, Patrice Anne The role of respiration-dependent proton translocation in the acid tolerance of Gluconobacter oxydans Microbiology 2010-07-21
Bowdre, Jean Handy Development of defined media for motility and for growth of Spirillum volutans, with special reference to biological monitoring of pollutants and to obligate microaerophilism of bacteria. Microbiology 2010-06-02
Connolly, Kevin Michael Positive and negative immunoregulation of normal and tumor-bearing mouse T cell blastogenesis Microbiology 2010-07-28
Correa-O, Margarita M. Potential of the mosquito pathogen Bacillus sphaericus for recycling and gene transfer in larval cadavers Microbiology 2006-03-02
Dolan, Rodney Martin The distribution of anaerobic bacteria along a soil drainage catena. Microbiology 2010-06-12
Dorsey, Ralph Benjamin Bovine parvovirus and bovine enterovirus in mixed infections. Microbiology 2010-07-07
Eaton, Twilla Epidemiology of Mycobacterium avium complex infecting AIDS patients Microbiology 2010-03-30
Edwards, Deborah Elizabeth Diversity of limited oxidations accomplished by gluconobacter oxydans Microbiology 2009-04-14
Frey, Steven M. The localization of two epitopes recognized by the monoclonal antibody PCG-4 on toxin A of Clostridium difficile Microbiology 2009-05-02
George, Hugh A. Formulation of improved media for isolation and cultivation of Campylobacter fetus. Microbiology 2010-06-12
Jucker, Markus Thomas Relationship of plasmids in Mycobacterium avium, Mycobacterium intracellulare, and Mycobacterium scrofulaceum Microbiology 2005-09-20
King, Laura Kathryn Response of indigenous heterotrophic groundwater bacteria to low organic substrate availability Microbiology 2008-08-25
Lampe, Robert Carl The 16S rRNA characterization of a novel "microaerophilic" Pseudomonas sp. from the oligotrophic deep subsurface environment Microbiology 2008-11-07
Mays, Thomas Dale Plasmid deoxyribonucleic acid of strains of the saccharolytic intestinal Bacteroides Microbiology 2012-09-12
McKibben, Ann Laura Characterization of plasmids in Gluconobacter Microbiology 2009-08-14
Pethel, Michele Lee Plasmid-influenced changes in Mycobacterium avium catalase activity Microbiology 2010-06-12
Russell, Brenda Lurline Factors preventing the metabolism of carbohydrates by Bacillus sphaericus 2362 Microbiology 2010-10-13
Swartwood, Suzanne Christine The evolution of hydrogen sulfide by Gluconobacter species Microbiology 2009-02-13
Tucker, Kenneth Davis Characterization of the carbohydrate receptors of the Clostridium difficile enterotoxin Microbiology 2006-05-11
VanLare, Ian Judd Isolation and characterization of the (NAD(P)-independent)polyol dehydrogenase from the plasma-membranes of gluconobacter oxydans ATCC strain 621 Microbiology 2005-10-26
Vercellone, Pamela Ann Oxygen toxicity in Campylobacter jejuni :physiological comparison of a microaerophilic wild-type strain with an aerotolerant mutant Microbiology 2012-11-21
Via, Laura Ellen Akers Insertion sequence IS1141: discovery, characterization, and association with Mycobacterium intracellulare colonial variation Microbiology 2005-10-20
Walker, Clay B. Experimental anaerobic bacterial infections in mice Microbiology 2012-08-01
Warek, Ujwala Action of clofazimine on Mycobacterium avium and Mycobacterium intracellulare Microbiology 2009-03-04
Wilson, Jeanne Burrowbridge ATP, trehalose, glucose, and ammonium ion levels in the two cell types of Dictyostelium discoideum. Microbiology 2010-06-12
Carlisle, Glenn E Characterization of Mycobacterium avium cytoplasmic membrane proteins with an emphasis on the major cytoplasmic membrane protein Microbiology and Immunology 2010-05-11
Clary, Sara Reed The effects of nitrosoureas on Thymocyte differentiation and T cell activation Microbiology and Immunology 2009-04-07
Seyler, Richard W Plasmid stability of pUB110 and pUB110-derived plasmids in Bacillus sphaericus 2362 Microbiology and Immunology 2010-03-02
Yurochko, Andrew David The association of tumor-induced changes in macrophage phenotype with immunosuppressive functions Microbiology and Immunology 2007-07-12
Addison, Coby Braxton Development of a Multi-Stream Monitoring and Control System for Dense Medium Cyclones Mining and Minerals Engineering 2010-02-03
Akram, Muhammad Stability assessment of entry roofs in underlying multiple seam mines Mining and Minerals Engineering 2008-06-06
Aksoy, Bayram Suha Hydrophobic Forces in Free Thin Films of Water in the Presence and Absence of Surfactants Mining and Minerals Engineering 1997-05-08
Andrews, Kevin Enhancing Mine Subsidence Prediction and Control Methodologies for Long-Term Landscape Stability Mining and Minerals Engineering 2008-06-27
Banik, Janajiban Preventing spontaneous combustion in gob areas of retreating longwall panels by ventilating without bleeders Mining and Minerals Engineering 2005-11-10
Barbee, Christopher John In-Plant Testing of the Hydrofloat Separator for Coarse Phospahte Recovery Mining and Minerals Engineering 2007-12-18
Basar, Joseph James Improvement of Ground-Fault Relaying Selectivity through the Application of Directional Relays to High-Voltage Longwall Mining Systems Mining and Minerals Engineering 2004-04-30
Basim, Gul Bahar Fine Coal Dewatering Mining and Minerals Engineering 1997-12-05
Basu, Kohinoor Feasibility of an Integrated Thin Seam Coal Mining and Waste Disposal System Mining and Minerals Engineering 1997-12-15
Bowling, John Robert Reid Design of an Experimental Mine Simulator for the Development of a Procedure for Utilization Multiple Tracer Gases in Underground Mines Mining and Minerals Engineering 2011-05-10
Brown, Michael Duane An investigation of fine coal grinding kinetics Mining and Minerals Engineering 2013-11-15
Broyles, David A Rapid shape characterization of crushed stone by PC-based digital image processing Mining and Minerals Engineering 2009-07-21
Bullock, John C Improved quarry design using deterministic and probablistic techniques Mining and Minerals Engineering 2009-11-10
Burke, Lisa Michelle Numerical Modeling for Increased Understanding of the Behavior and Performance of Coal Mine Stoppings Mining and Minerals Engineering 2003-05-13
Chandrasekhar, Prabhu Design And Testing Of A Triboelectrostatic Separator For Cleaning Coal Mining and Minerals Engineering 1999-03-31
Chen, Xianguo Control of Surface Chemistry of Gold, Pyrite and Pyrrhotite Mining and Minerals Engineering 1998-11-04
Conaway, Shawn Michael Characterizing Trace Element Associations in the Pittsburgh No. 8, Illinois No. 6 and Coalburg Coal Seams Mining and Minerals Engineering 2002-01-22
Craynon, John Raymond Approaches and Barriers to Incorporating Sustainable Development Into Coal Mine Design Mining and Minerals Engineering 2011-11-18
Craynon, John Raymond The collectorless flotation of sphalerite Mining and Minerals Engineering 2012-11-14
Cruz, Eva Brunilda A Comprehensive Dynamic Model of the Column Flotation Unit Operation Mining and Minerals Engineering 1997-07-31
Cruz, Eva Brunilda Simulation of computer control strategies for column flotation Mining and Minerals Engineering 2009-12-04
Davis, Van Leslie Characterization and scale-up of microbubble generation in column flotation Mining and Minerals Engineering 2009-03-24
Dieudonne, Vincent Chemical and Electrochemical Coal Cleaning in acidic medium application and analysis of the process Mining and Minerals Engineering 2010-07-21
Donovan, James G. The Effects of Backfilling on Ground Control and Recovery in Thin-Seam Coal Mining Mining and Minerals Engineering 1999-05-20
Donovan, James George Fracture Toughness Based Models for the Prediction of Power Consumption, Product Size, and Capacity of Jaw Crushers Mining and Minerals Engineering 2003-08-06
Duan, Chunming Stochastic availability analysis and modeling of longwall mining operations Mining and Minerals Engineering 2007-07-12
Duerksen, Alek Charles A Feasibility Analysis of Wind Power as an Alternative Post-mining Land Use in Surface Coal Mines in West Virginia Mining and Minerals Engineering 2011-10-03
Dunn, Peter L. Development of a video-based slurry sensor for on-line ash analysis Mining and Minerals Engineering 2009-02-13
Dyne, Laura Anne The Prediction and Occurrence of Chimney Subsidence in Southwestern Pennsylvania Mining and Minerals Engineering 1998-01-23
Eisenmann, Matthew Donnel Elutriation Technology in Heavy Mineral Separations Mining and Minerals Engineering 2001-11-15
Eraydin, Mert Kerem Evaluation of Novel Fine Coal Dewatering Aids Mining and Minerals Engineering 2004-07-26
Eraydin, Mert Kerem Scale-up of Using Novel Dewatering Aids Mining and Minerals Engineering 2009-06-07
Exadaktylos, George E. Computer aided blast fragmentation prediction Mining and Minerals Engineering 2010-07-08
Fahrman, Benjamin Paul Geophone Array Optimization for Monitoring Geologic Carbon Sequestration using Double-Difference Tomography Mining and Minerals Engineering 2011-12-19
Flinn, Darrin Heinz Modeling bubble-particle interactions in flotation using hydrophobic solid surfaces Mining and Minerals Engineering 2008-06-06
Forrest, W. R. Processing of high-sulfur coals using microbubble column flotation Mining and Minerals Engineering 2009-04-14
Fraher, Richard Louis Optimizing roof control using probabilistic techniques in roof failure prediction Mining and Minerals Engineering 2009-10-06
Freeland, Chad Lee LOW TEMPERATURE DRYING OF ULTRAFINE COAL Mining and Minerals Engineering 2011-01-07
Furniss, Matthew David Quantitative Comparison of Seismic Velocity Tomography With Seismic Activity Around a Deep Coal Longwall Panel Mining and Minerals Engineering 2009-05-12
Ganguli, Rajive Stress transfer between multi-seam longwall mines Mining and Minerals Engineering 2009-03-24
Griffin, Kenneth Reed Design Criteria for Wireless Mesh Communications in Underground Coal Mines Mining and Minerals Engineering 2009-05-15
Gross, Brett Ivan Investigation of a method for monitoring stress changes in the burst prone seams of southwestern Virginia Mining and Minerals Engineering 2010-04-12
Gupta, Nikhil Dry Deshaling of Thermal Coals in India Mining and Minerals Engineering 2011-11-08
Hale, Waverly Mitchell Surface chemical aspects of microbubble flotation Mining and Minerals Engineering 2012-11-17
Hangsubcharoen, Monpilai A Study of Triboelectrification for Coal , Quartz and Pyrite Mining and Minerals Engineering 1999-04-29
Harwood, Cary P. Optimizing secondary tailgate support selection Mining and Minerals Engineering 2008-09-18
Haycocks, Scott Gavin Mining and environmental factors in selecting an underground versus a quarry mining system Mining and Minerals Engineering 2010-03-30
Holman, Darren Wayne Development of an Underground Automated Thin-Seam Coal Mining Method Mining and Minerals Engineering 1999-05-17
Holman, Travis Scott Analysis and optimization of coalbed methane gas well production Mining and Minerals Engineering 2008-10-01
Honaker, Ricky Quay A fundamental study of the selective hydrophobic coagulation process Mining and Minerals Engineering 2008-06-06
Hyder, Zeshan Site Characterization, Sustainability Evaluation and Life Cycle Emissions Assessment of Underground Coal Gasification Mining and Minerals Engineering 2012-09-13
Johnson, Wesley Byron Design and Testing of a Laboratory Ultrasonic Data Acquisition System for Tomography Mining and Minerals Engineering 2005-01-14
Jong, Edmund Chime Application of Background Oriented Schlieren (BOS) in Underground Mine Ventilation Mining and Minerals Engineering 2011-05-05
Kan, Stephen Wai-Sing Experimental evaluation of polyester grout as a ground control measure in underground mines Mining and Minerals Engineering 2009-05-09
Kanniganti, Ravi S. Interactive prediction software for underlying multi-seam design Mining and Minerals Engineering 2008-10-02
Keim, Steven Anthony Optimization of Coalbed Methane Completion Strategies, Selection Criteria and Production Prediction: A Case Study in China’s Qinshui Basin Mining and Minerals Engineering 2011-08-31
Keles, Serhat Fine Coal Dewatering Using Hyperbaric Centrifugation Mining and Minerals Engineering 2010-05-14
Kelley, Kyle Model-based Computer Simulation of Froth Flotation Mining and Minerals Engineering 2011-02-18
Kennedy, Dennis Lee Redesign of Industrial Column Flotation Circuits Based on a Simple Residence Time Distribution Model Mining and Minerals Engineering 2008-10-27
Kerr, Jeffrey Bryan Applications of Double-Difference Tomography for a Deep Hard Rock Mine Mining and Minerals Engineering 2011-11-29
Kim, Kwangmin Blasting Design Using Fracture Toughness and Image Analysis of the Bench Face and Muckpile Mining and Minerals Engineering 2006-08-16
Kiser, Michael James Development of Methods to Aid in Flotation Circuit Evaluations and Drip Pan Design Mining and Minerals Engineering 2012-04-19
Knapp, Jennifer Mary Smith A study of floatation froth behavior Mining and Minerals Engineering 2009-04-08
Kohmuench, Jaisen Nathaniel Precombustion Removal of Hazardous Air Pollutant Precursors Mining and Minerals Engineering 1997-12-16
Kohmuench, Jaisen Nathaniel Improving Efficiencies in Water-Based Separators Using Mathematical Analysis Tools Mining and Minerals Engineering 2000-10-06
Konduri, Indu Mohan Flow characteristics of jet fans in mines :experimental and numerical modeling Mining and Minerals Engineering 2008-06-06
Li, Yanqing Electrochemical studies of pyrite and galena Mining and Minerals Engineering 2009-06-10
Lin, Wei The Ignition of Methane and Coal Dust by Air Compression - The Experimental Proof Mining and Minerals Engineering 1998-07-18
Logan, Kenneth Scott Analysis of Wireless Tiltmeters for Ground Stability Monitoring Mining and Minerals Engineering 2008-04-28
Loomis, Ian Morton Experiments Concerning the Commercial Extraction of Methane from Coalbed Reservoirs Mining and Minerals Engineering 1998-07-25
Looney, John H. Evaluation of column flotation circuits for fine coal cleaning Mining and Minerals Engineering 2009-06-11
Luo, JunLu Gateroad Design in Overlying Multi-Seam Mines Mining and Minerals Engineering 1998-07-18
Luo, JunLu A New Rock Bolt Design Criterion and Knowlwdge-based Expert System for Stratified Roof Mining and Minerals Engineering 1999-08-03
Luxbacher, Kramer Davis Time-lapse Passive Seismic Velocity Tomography of Longwall Coal Mines: A Comparison of Methods Mining and Minerals Engineering 2008-09-18
Luxbacher, Kramer Davis Four-Dimensional Passive Velocity Tomography of a Longwall Panel Mining and Minerals Engineering 2005-12-20
Ma, Nini Direct Force Measurement between Surfaces Coated with Hydrophobic Polymers in Aqueous Solutions and the Separation of Mixed Plastics by Flotation Mining and Minerals Engineering 2008-12-22
Ma, Juan CO2 Mineralization Using Reactive Species Mining and Minerals Engineering 2012-05-07
Mankosa, Michael James Scale-up of column flotation Mining and Minerals Engineering 2007-08-23
Mankosa, Michael James Investigation of operating conditions in stirred ball milling of coal Mining and Minerals Engineering 2009-03-12
Mao, Laiqun Application of Extended DLVO Theory: Modeling of Flotation and Hydrophobicity of Dodecane Mining and Minerals Engineering 1998-10-10
Maran, Juliano Study of truck allocation and truck dispatching problems in open pit mines Mining and Minerals Engineering 2012-11-17
Mastoris, John An application of 3-D modeling and optimization of the final pit limits for a lignite deposit Mining and Minerals Engineering 2009-07-11
McKeon, Timothy Josiah An In-Plant Evaluation of Froth Washing on Conventional Flotation Cells for Coal Mining and Minerals Engineering 2001-11-15
Miller, Stephen J In-rest Vehicle GPS Proximity Warning in Surface Operations Mining and Minerals Engineering 2005-11-09
Miskovic, Sanja An Investigation of the Gas Dispersion Properties of Mechanical Flotation Cells: an In-Situ Approach Mining and Minerals Engineering 2011-12-21
Miskovic, Ilija A Data-Driven Approach for the Development of a Decision Making Framework for Geological CO2 Sequestration in Unmineable Coal Seams Mining and Minerals Engineering 2011-12-23
Mitra, Rudrajit Imaging of Stress in Rock Samples using Numerical Modeling and Laboratory Tomography Mining and Minerals Engineering 2006-04-19
Murphy, Michael Martin Defining Stress Changes Ahead of a Tunnel Face and Design of a Data Acquisition System Mining and Minerals Engineering 2005-12-19
Murphy, Tyson M. A Method for Evaluating the Application of Variable Frequency Drives with Coal Mine Ventilation Fans Mining and Minerals Engineering 2006-04-25
Murphy, Michael M Analysis of Seismic Signatures Generated from Controlled Methane and Coal Dust Explosions in an Underground Mine Mining and Minerals Engineering 2008-11-21
Niu, Jing Desalination of Produced Water via Gas Hydrate Formation and Post Treatment Mining and Minerals Engineering 2012-07-12
Noble, Christopher Aaron Laboratory-Scale Analysis of Energy-Efficient Froth Flotation Rotor Design Mining and Minerals Engineering 2012-10-19
Pan, Lei Hydrophobic Forces in Wetting Films Mining and Minerals Engineering 2009-12-17
Parker, Brian Mark The Simulation and Analysis of Particle Flow Through an Aggregate Stockpile Mining and Minerals Engineering 2009-12-03
Patrick, William Charles Investigation, Analysis, and Modeling of Longwall Face-to-Face Transfers Mining and Minerals Engineering 2008-06-09
Patterson, Rosemary Rita Determination of a novel mine tracer gas and development of a methodology for sampling and analysis of multiple mine tracer gases for characterization of ventilation systems Mining and Minerals Engineering 2011-04-19
Phillips, Dennis Ivan Optimum Processing of 1 mm by Zero Coal Mining and Minerals Engineering 1998-04-09
Pyecha, Jason R An evaluation of separation methods for the selective coagulation of ultrafine coal Mining and Minerals Engineering 2008-09-18
Randolph, John Michael Characterizing Flotation Response: A Theoretical and Experimental Comparison of Techniques Mining and Minerals Engineering 1997-09-12
Reed, William Randolph An Improved Model for Prediction of PM10 from Surface Mining Operations. Mining and Minerals Engineering 2003-04-21
Ripepi, Nino Samuel Carbon Dioxide Storage in Coal Seams with Enhanced Coalbed Methane Recovery: Geologic Evaluation, Capacity Assessment and Field Validation of the Central Appalachian Basin Mining and Minerals Engineering 2009-08-17
Robidoux, Jeff Real-Time Spatial Monitoring of Vehicle Vibration Data as a Model for TeleGeoMonitoring Systems Mining and Minerals Engineering 2005-05-09
Sadtler, Daniel Allan Passive Tomography to Image Stress Redistribution Prior to Failure on Berea Sandstone and Marcellus Shale for Caprock Integrity Mining and Minerals Engineering 2012-05-08
Salomon, Jeffrey A Design and Testing of a Hyperbaric Horizontal Belt Filter for Fine Coal Dewatering Mining and Minerals Engineering 2007-06-01
Sarver, Emily Allyn The Ferrous Regeneration Process for Use in Alternate Anode Reaction Technology in Copper Hydrometallurgy Mining and Minerals Engineering 2005-08-01
Schafrik, Steven Joseph A New Style of Simulation Model for Mining Systems Mining and Minerals Engineering 2001-10-04
Schaum, Adam Michael Increasing Haul Truck Safety through the use of Virtual Pre-Shift Inspection Training Mining and Minerals Engineering 2007-05-15
Schimann, Hubert C. R. Force and Energy Measurement of Bubble-Particle Detachment Mining and Minerals Engineering 2004-06-04
Schimmoller, Brian Keith A bubble-particle interaction model for flotation combining hydrodynamic and surface forces Mining and Minerals Engineering 2009-09-19
Sellami, Moncef Recoverable reserve estimation in multiple seam mines Mining and Minerals Engineering 2009-09-19
Sherrell, Ian Michael Parameter Evaluation and Modeling of a Fine Coal Dewatering Screen-Bowl Centrifuge Mining and Minerals Engineering 2001-05-11
Sherrell, Ian M Development of a Flotation Rate Equation from First Principles under Turbulent Flow Conditions Mining and Minerals Engineering 2004-12-05
Shin, Dongcheol Evaluation of Methods for Improving Classifying Cyclone Performance Mining and Minerals Engineering 2007-05-16
Slaker, Brent Allan Double-Difference Tomography Applied to Monitoring of Geologic Carbon Sequestration in the Aneth Oil Field, Utah Mining and Minerals Engineering 2011-12-19
Smith, Kara E. Cleaning and Dewatering Fine Coal using Hydrophobic Displacement Mining and Minerals Engineering 2008-06-04
Smith, Sarah Ann Methods of Improving Oil Agglomeration Mining and Minerals Engineering 2012-05-07
Stevens, Dennis Frederick Stress Redistribution in Berea Sandstone Samples Using Acoustic Emission Tomography in the Laboratory Mining and Minerals Engineering 2007-05-17
Storey, Andrew Wilson Design Optimization of Safety Benches for Surface Quarries through Rockfall Testing and Evaluation Mining and Minerals Engineering 2010-08-27
Tao, Dongping A comprehensive study of the electrochemistry and floatibility of pyrite in coal flotation Mining and Minerals Engineering 2008-11-18
Venkatraman, Parthasarathy Evaluation of an advanced fine coal cleaning circuit Mining and Minerals Engineering 2008-06-06
Wang, Liguang Surface Forces in Foam Films Mining and Minerals Engineering 2006-03-22
Westerfield, Tracy Cheryl Evaluation of Hydraulic Separator Applications in the Coal and Mineral Industries Mining and Minerals Engineering 2005-10-14
Westman, Erik Christian A Characterization and Determination of the Coal Reserves and Resources of Southwest Virginia Mining and Minerals Engineering 1999-04-08
Whitney, Joshua Andrew Application of Electromagnetic Methods to Identify and Characterize Sub-surface Structures Associated with the Coles Hill Uranium Deposit Mining and Minerals Engineering 2009-05-21
Woofter, Christopher L Environmental compliance in quarrying operations :a computer-based decison support system Mining and Minerals Engineering 2009-02-13
Wu, Xiaolin Theoretical analysis of bump and airblast events associated with coal mining under strong roofs Mining and Minerals Engineering 2007-08-08
Yan, Suming Parametric study and simulation of microbubble column flotation Mining and Minerals Engineering 2009-03-12
Yildirim, Ismail Surface Free Energy Characterization of Powders Mining and Minerals Engineering 2001-05-04
Young-On, Harold An economic evaluation of backfilling in Virginia's coal mines Mining and Minerals Engineering 2009-02-13
Yu, Zhanjing A study of building response and damage due to mining-induced ground movements Mining and Minerals Engineering 2007-07-11
Zhang, Jinhong Surface Forces between Silica Surfaces in CnTACl Solutions and Surface Free Energy Characterization of Talc Mining and Minerals Engineering 2006-12-08
Zhang, Jinming Development of Environmentally Friendly Non-Chrome Conversion Coatings for Cold-Rolled Steel Mining and Minerals Engineering 2003-08-26
Zhou, Huaizu Increasing existing mechanical hoisting capacity with supplementary hydraulic hoisting Mining and Minerals Engineering 2009-07-29
Akram, Muhammad The effect of zero point charge environment on rock fracture behavior Mining Engineering 2009-08-14
Bowman, Charles H Geotechnical charcterization of coal refuse for use as a backfill material Mining Engineering 2009-08-18
Campoli, Alan A. Bump control design protocol for room-and-pillar retreat mining Mining Engineering 2008-06-06
Crabtree, Walter A Forecast of Virginia coal production Mining Engineering 2009-01-10
Dunlap, John Classification and analysis of longwall delays Mining Engineering 2009-05-02
Fisher, Frank Tasman A study of the mineralogy of roof and floor strata associated with coal mines Mining Engineering 2012-09-08
Forrest, Peter Layout design for interactive zones in longwall multiple seam mining Mining Engineering 2010-07-21
Grimes, Janet A. Economic and system feasibility study of municipal waste stowage in underground coal mines Mining Engineering 2009-05-09
Hao, Bin Use of fracture mechanics parameters to characterize comminution Mining Engineering 2010-02-16
Hosca, Erhan Numerical analyses of the effectiveness of secondary tailgate support systems :a stability approach Mining Engineering 2009-03-04
Kar, Tapas Ranjan Fuzzy logic-based fault diagnosis for mining equipment failures Mining Engineering 2012-06-10
Koo, Shiun Ming A study of the factors that affect the permeability of coal Mining Engineering 2013-11-15
Li, Zhongxue Determining the size and life of underground coal mines Mining Engineering 2008-10-02
Lin, Po-Ming Using wave attenuation techniques for monitoring of stress levels Mining Engineering 2012-11-17
Loomis, Ian Morton Application of water mist to fuel-rich fires in model coal mine entries Mining Engineering 2009-01-10
Neall, George M A photoelastic study of roof truss-roof interactions in a multilayered mine model. Mining Engineering 2010-06-02
Noble, John Mills The relationship between the crushing strength of brittle materials and the size of cubical specimens tested Mining Engineering 2010-05-11
Ouyang, Hsien-Ju Numerical modeling of tool-rock interaction in laminated formations Mining Engineering 2009-03-12
Schaaf, Herbert L The concentration of germanium in coal Mining Engineering 2010-04-07
Wu, Xing Optimization of control device locations and sizes in mine ventilation systems Mining Engineering 2008-06-06
Parmesano, Vincent The feasibility of merging Christiansburg and Cambria, Virginia Municipal Engineering and Administration 2010-05-04
Wilson, Leslie The Music Muse Music 1996-11-01
Phillips, William Jeter An experiment in generating vinegar Mycology 2008-09-09

( Browse | Search ) All Available ETDs

If you have questions or technical problems, please Contact DLA.