Type of Document Master's Thesis Author Wang, Zijian Author's Email Address email@example.com URN etd-05132010-232753 Title DM EMI Noise Analysis for Single Channel and Interleaved Boost PFC in Critical Conduction Mode Degree Master of Science Department Electrical and Computer Engineering Advisory Committee
Advisor Name Title Lee, Fred C. Committee Chair Boroyevich, Dushan Committee Member Wang, Shuo Committee Member Keywords
- EMI noise
- Quasi-peak detection
- Mathematical prediction
- Critical conduction mode
- Interleaved boost PFC
Date of Defense 2010-04-30 Availability unrestricted AbstractThe critical conduction mode (CRM) power factor correction converters (PFC) are widely used in industry for low power offline switching mode power supplies. For the CRM PFC, the main advantage is to reduce turn-on loss of the main switch. However, the large inductor current ripple in CRM PFC creates huge DM EMI noise, which requires a big EMI filter. The switching frequency of the CRM PFC is variable in half line cycle which makes the EMI characteristics of the CRM PFC are not clear and have not been carefully investigated. The worst case of the EMI noise, which is the baseline to design the EMI filter, is difficult to be identified. In this paper, an approximate mathematical EMI noise model based on the investigation of the principle of the quasi-peak detection is proposed to predict the DM EMI noise of the CRM PFC. The developed prediction method is verified by measurement results and the predicted DM EMI noise is good to evaluate the EMI performance. Based on the noise prediction, the worst case analysis of the DM EMI noise in the CRM PFC is applied and the worst case can be found at some line and load condition, which will be a great help to the EMI filter design and meanwhile leave an opportunity for the optimization of the whole converter design.
What is more, the worst case analysis can be extended to 2-channel interleaved CRM PFC and some interesting characteristics can be observed. For example, the great EMI performance improvement through ripple current cancellation in traditional constant frequency PFC by using interleaving techniques will not directly apply to the CRM PFC due to its variable switching frequency. More research needs to be done to abstract some design criteria for the boost inductor and EMI filter in the interleaved CRM PFC.
Filename Size Approximate Download Time (Hours:Minutes:Seconds)
28.8 Modem 56K Modem ISDN (64 Kb) ISDN (128 Kb) Higher-speed Access Wang_Z_T_2010.pdf 2.46 Mb 00:11:24 00:05:52 00:05:08 00:02:34 00:00:13
If you have questions or technical problems, please Contact DLA.