Type of Document Dissertation Author Katz, Bryan Jeffrey Author's Email Address email@example.com URN etd-05172007-135959 Title Peripheral Transverse Pavement Markings for Speed Control Degree PhD Department Civil Engineering Advisory Committee
Advisor Name Title Rakha, Hesham Ahmed Committee Chair Dingus, Thomas A. Committee Member Hawkins, H. Gene Committee Member Robinson, Mark Committee Member Tignor, Samuel C. Committee Member Keywords
- speed control
- peripheral transverse markings
- speed management
- traffic safety
- human factors
Date of Defense 2007-04-26 Availability unrestricted AbstractIn the United States, speeding is considered to be a contributing factor in about 30 percent of fatal crashes (US DOT, 2000). In an attempt to reduce speeds on roadway segments where speed is considered to be a safety concern, various low cost countermeasures have been investigated. Such countermeasures include pavement markings that give a psychological appearance of narrowing and/or increasing speed have been considered as a relatively low-cost treatment. Perceptual cues are one potential method of influencing motorists to slow down, and ultimately, to save lives. These perceptual techniques might be useful at lowering speeds in a variety of driving situations such as work zones, curves, roundabouts, and toll plazas. Evaluations are required in order to determine the effectiveness of these various treatments at reducing speeds. This research project explored several possible perceptual countermeasures to try on the approaches to curves for reducing speeds. It was ultimately decided to evaluate the effects of peripheral transverse lines in reducing speeds.
Although there have been some limited evaluations of peripheral transverse markings in previous studies, no significant field evaluation has been performed and a recommended design for the markings has not been discussed. The projected results of the research effort is to determine pavement marking treatments with a high probability of success at reducing speeds, develop and design peripheral transverse markings based on site considerations, determine the effectiveness of the markings in the field, determine optimal pavement marking design using a driving simulator, and use a controlled research environment to finalize the design.
This dissertation contributes to the body of knowledge on speed reduction research through the development of low cost speed reduction strategies, the design of peripheral transverse lines for varying geometric conditions, evaluation of these treatments in the field, in the simulator, and on a controlled roadway, and to finally compare the benefits of each of the evaluation approaches.
In the field, peripheral transverse lines spaced at a frequency of 4 bars per second were evaluated in New York, Mississippi, and Texas. The markings were applied on approaches to curves in both rural and urban environments on both multi-lane and two-lane roadways. The authors concluded that overall, the pavement markings reduced speeds up to 59% compared to the baseline in the short term and 24% in the long term on overall vehicle speeds.
When evaluating design alternatives of peripheral transverse markings, a follow-up study was performed and compared baseline conditions to markings spaced at a constant interval, exponentially closer, at two bars per second, and at four bars per second. The peripheral transverse lines were effective in reducing centerline encroachment; however, the results were inconclusive as to which particular marking spacing pattern was most effective. There was a large amount of variability in driving speeds using the driving simulator which made it ineffective at comparing designs.
The third evaluation was performed at the Virginia Tech Smart Road in which reductions in speed were compared to the baseline at two locations. While one curve had large preview distances and no effect due to the treatments, speed reductions on a freeway ramp type of curve resulted in a speed reduction 42% greater than the reduction in the baseline condition.
There are several advantages and disadvantages to evaluations in the field, simulator, and at a controlled research setting which are summarized in this dissertation. Overall, all three have potential of looking at different elements, but it was determined that variability when measuring speed in the driving simulator makes it more challenging as a tool for measuring speed reductions.
Filename Size Approximate Download Time (Hours:Minutes:Seconds)
28.8 Modem 56K Modem ISDN (64 Kb) ISDN (128 Kb) Higher-speed Access KatzPhDDissertation.pdf 944.62 Kb 00:04:22 00:02:14 00:01:58 00:00:59 00:00:05
If you have questions or technical problems, please Contact DLA.