Type of Document Dissertation Author Johnson, Matthew B. URN etd-09182000-13140044 Title Investigations of the Processing-Structure-Property Relationships of Selected Semicrystalline Polymers Degree PhD Department Chemical Engineering Advisory Committee
Advisor Name Title Wilkes, Garth L. Committee Chair Conger, William L. Committee Member Davis, Richey M. Committee Member Long, Timothy E. Committee Member Saraf, Ravi F. Committee Member Keywords
Date of Defense 2000-09-06 Availability unrestricted AbstractAn investigation was carried out on a three stage method (extrusion/annealing/uniaxial-stretching) (MEAUS) utilized to produce semicrystalline polymeric microporous membranes. The two semicrystalline polymers studied were selected based on a set-of-prerequisites proposed for the formation of highly porous membranes via the method in question. The prerequisites included "fast" crystallization kinetics, presence of an ac relaxation, ability to form a planar stacked lamellar morphology with a "good" crystalline orientation upon melt-extrusion, and rapid heat transfer of the film during extrusion. The first polymer was isotactic poly(4-methyl-1-pentene) (PMP), and the second was polyoxymethylene (POM). Three PMP resins were studied, which differed in weight average molecular weight. Three POM resins were also investigated where two of resins were characterized by relatively narrow molecular weight distributions (MWD) ca 2 while the third POM resin possessed a MWD ca 5.9. The melt-extruded film morphologies and orientation values were a consequence of the melt-relaxation times as a result of the resin characteristics and/or the melt-extrusion conditions.
Following the extrusion stage, the effect of annealing (second stage) on film properties was investigated. The annealing variables investigated included the temperature, time, and level of extension applied during annealing. The annealed films were then subjected to the uniaxially stretching stage (third stage) consisting of a cold and hot step, respectively, where deformation was along the extrusion direction. The variables of interest included the cold and hot stretch temperature and extension level. It was found that starting precursor morphology and orientation, annealing conditions, and stretching variables impact the final film microporous morphology and permeability. Additionally, the proposed prerequisites were verified in both the PMP and POM film series.
In addition to the MEAUS study, a comprehensive investigation was conducted of the optical properties of blown and cast films made from conventional Ziegler-Natta catalyzed linear low density polyethylene (LLDPE) as well as metallocene-catalyzed LLDPE resins. From this work, it was determined that in PE blown and cast films made using conventional processing conditions, the optical haze properties are adversely affected due to enhanced surface roughness caused by the formation of spherulitic-like superstructures in polymer melts that possess fast relaxing and low melt elasticity rheological characteristics. This optical property study was also published in J. Appl. Polym. Sci., 77(13), 2845, (2000).
Filename Size Approximate Download Time (Hours:Minutes:Seconds)
28.8 Modem 56K Modem ISDN (64 Kb) ISDN (128 Kb) Higher-speed Access 10_Chpt4.pdf 2.83 Mb 00:13:06 00:06:44 00:05:53 00:02:56 00:00:15 11_Chpt5.pdf 2.85 Mb 00:13:12 00:06:47 00:05:56 00:02:58 00:00:15 12_Chpt6.pdf 3.25 Mb 00:15:01 00:07:43 00:06:45 00:03:22 00:00:17 13_Chpt7.pdf 45.49 Kb 00:00:12 00:00:06 00:00:05 00:00:02 < 00:00:01 14_Chpt8.pdf 2.91 Mb 00:13:28 00:06:55 00:06:03 00:03:01 00:00:15 1_Title.pdf 5.43 Kb 00:00:01 < 00:00:01 < 00:00:01 < 00:00:01 < 00:00:01 2_Abstract.pdf 11.41 Kb 00:00:03 00:00:01 00:00:01 < 00:00:01 < 00:00:01 3_Acknow.pdf 8.89 Kb 00:00:02 00:00:01 00:00:01 < 00:00:01 < 00:00:01 4_TOC.pdf 10.66 Kb 00:00:02 00:00:01 00:00:01 < 00:00:01 < 00:00:01 5_LOF.pdf 76.71 Kb 00:00:21 00:00:10 00:00:09 00:00:04 < 00:00:01 6_LOT.pdf 18.45 Kb 00:00:05 00:00:02 00:00:02 00:00:01 < 00:00:01 7_Intro.pdf 26.77 Kb 00:00:07 00:00:03 00:00:03 00:00:01 < 00:00:01 8_litreview.pdf 1.25 Mb 00:05:46 00:02:58 00:02:35 00:01:17 00:00:06 9_Chpt3.pdf 2.36 Mb 00:10:55 00:05:37 00:04:54 00:02:27 00:00:12
If you have questions or technical problems, please Contact DLA.