Type of Document Master's Thesis Author RamaSarma, Vaidyanathan Author's Email Address firstname.lastname@example.org URN etd-10032002-113335 Title A Coverage Area Estimation Model for Interference-Limited Non-Line-of-Sight Point-to-Multipoint Fixed Broadband Wireless Communication Systems Degree Master of Science Department Electrical and Computer Engineering Advisory Committee
Advisor Name Title Bostian, Charles W. Committee Chair Midkiff, Scott F. Committee Member Sweeney, Dennis G. Committee Member Keywords
- Fixed Broadband Wireless Access (FBWA)
- Co-channel Interference
- Point-to-Multipoint (PMP)
- Non-Line-of-Sight (NLOS)
- Coverage Area
Date of Defense 2002-09-19 Availability unrestricted AbstractFirst-generation, line-of-sight (LOS) fixed broadband wireless access techniques have been around for several years. However, services based on this technology have been limited in scope to service areas where transceivers can communicate with their base stations, unimpeded by trees, buildings and other obstructions. This limitation has serious consequences in that the system can deliver only 50% to 70% coverage within a given cell radius, thus affecting earned revenue. Next generation broadband fixed wireless access techniques are aimed at achieving a coverage area greater than 90%. To achieve this target, these techniques must be based on a point-to-multipoint (PMP) cellular architecture with low base station antennas, thus possessing the ability to operate in true non-line-of-sight (NLOS) conditions. A possible limiting factor for these systems is link degradation due to interference.
This thesis presents a new model to estimate the levels of co-channel interference for such systems operating within the 3.5 GHz multichannel multipoint distribution service (MMDS) band. The model is site-specific in that it uses statistical building/roof height distribution parameters obtained from practically modeling several metropolitan cities in the U.S. using geographic information system (GIS) tools. This helps to obtain a realistic estimate and helps analyze the tradeoff between cell radius and modulation complexity. Together, these allow the system designer to decide on an optimal location for placement of customer premises equipment (CPE) within a given cell area.
Filename Size Approximate Download Time (Hours:Minutes:Seconds)
28.8 Modem 56K Modem ISDN (64 Kb) ISDN (128 Kb) Higher-speed Access RamasarmaThesis.pdf 10.18 Mb 00:47:06 00:24:13 00:21:11 00:10:35 00:00:54
If you have questions or technical problems, please Contact DLA.