Type of Document Master's Thesis Author Gupta, Ajay K. URN etd-12172008-063732 Title Development of a new shock capturing formula for pressure correction methods Degree Master of Science Department Mechanical Engineering Advisory Committee
Advisor Name Title Moore, John Committee Chair Brown, Eugene F. Committee Member Ng, Fai Committee Member Keywords
Date of Defense 1993-12-05 Availability restricted Abstract
Several methods have been developed to capture shock waves in turbo machinery flows, such as Moore's pressure correction procedure and Denton's time marching procedure. The time marching procedure is traditionally used for transonic flow calculations, whereas the pressure correction method is better suited for incompressible and subsonic flows. However, the focus of this research is on the Moore pressure correction flow code, the Moore Elliptical Flow Program (MEFP) , to calculate shock waves in transonic compressor fans.
A new pressure interpolation method, the 2M formula, is developed to improve the shock capturing capabilities of the MEFP flow code. The 2M formula is a two Mach number dependent formula, with Mach numbers Mi and M i + 1. The previously used pressure interpolation method, the M&M formula, is a one Mach number dependent formula, using the maximum of Mi and Mi + 1 . In the development of the 2M formula, J.G. Moore's stability criterion is applied to the pressure correction equation such that the center point coefficient is greater than the sum of the other positive coefficients.
Filename Size Approximate Download Time (Hours:Minutes:Seconds)
28.8 Modem 56K Modem ISDN (64 Kb) ISDN (128 Kb) Higher-speed Access LD5655.V855_1993.G867.pdf 2.72 Mb 00:12:34 00:06:27 00:05:39 00:02:49 00:00:14
If you have questions or technical problems, please Contact DLA.