Lisa M. Maillart
Master's Thesis submitted to the Faculty of the Virginia Tech in partial fulfillment of the requirements for the degree of
Master of Science
Industrial and Systems Engineering
Dr. Joel A. Nachlas, Chair
Dr. C. P. Koelling
Dr. J. Kobza
April 25, 1997
Test-analyze-and-fix (TAAF) is the most commonly recognized method of improving system reliability. The work presented here addresses the question of when to stop testing during TAAF programs involving one-shot systems when the number of systems to be produced is predetermined and the probabilities of identifying and successfully correcting each failure mode are less than one. The goal here is to determine when to cease testing to maximize utility where utility is defined as the number of systems expected to perform successfully in the field after deployment of the lot.
Two TAAF stopping rules are presented. Simulation is used to model TAAF execution under different reliability growth conditions. Four discrete reliability growth models (DRGM’s) are used to generate “real world” reliability growth and to estimate reliability growth using hypothetical observed success/failure data. Ranges for the following parameters are considered: starting reliability, growth rate, maximum achievable reliability, number of systems to be produced, probability of incorrectly identifying a failure mode, and probability of an unsuccessful design modification.
Conclusions are drawn regarding stopping rule performance in terms of stopping rule signal location, utility loss, achieved reliability, and fraction tested. Both rules perform well and are implementable from a practical standpoint. Specific recommendations for stopping rule implementation are given based on the controllable factors, estimation methodology and lot size.
List of attached files
File Name Size (Bytes) thesis.PDF 143,096 Bytes
The author grants to Virginia Tech or its agents the right to archive and display their thesis or dissertation in whole or in part in the University Libraries in all forms of media, now or hereafter known. The author retains all proprietary rights, such as patent rights. The author also retains the right to use in future works (such as articles or books) all or part of this thesis or dissertation.
Send Suggestions or Comments to email@example.com