Communications Project

Document Type:Master's Thesis
Name:Justin Tyberg
Degree:Master of Science
Department:Mechanical Engineering
Committee Chair: Jan Helge Bohn
Committee Members:Arvid Myklebust
Ronald Kander
Keywords:adaptive slicing, calibration, contour matching, fused deposition modeler, FDM, rapid prototyping
Date of defense:February 16, 1998
Availability:Release the entire work immediately worldwide.


Existing layered manufacturing systems fabricate parts using a constant build layer thickness. Hence, operators must compromise between rapid production with large surface inaccuracies, and slow production with high precision, by choosing between thick and thin build layers, respectively. Adaptive layered manufacturing methods alleviate this decision by automatically adjusting the build layer thickness to accommodate surface geometry, thereby potentially enabling part fabrication in significantly less time. Unfortunately, conventional adaptive layered manufacturing techniques are often unable to realize this potential when transitioning from the laboratory to an industrial setting. The problem is that they apply the variable build layer thickness uniformly across each horizontal build plane, applying the same build layer thickness to all parts and part features across that plane even though they have different build layer thickness needs. When this happens, the advantage of using adaptive build layer thicknesses is lost. This thesis demonstrates how to minimize fabrication times when implementing adaptive layered manufacturing. Specifically, it presents a new method in which each part or individual part feature is assigned a distinct, independent build layer thickness according to its particular surface geometry. Additionally, this thesis presents a calibration procedure for the Fused Deposition Modeler (FDM) rapid prototyping system that enables accurate, adaptively sliced parts to be physically realizable. Experimental software has been developed and sample parts have been fabricated to demonstrate both aspects of this work.

List of Attached Files


The author grants to Virginia Tech or its agents the right to archive and display their thesis or dissertation in whole or in part in the University Libraries in all forms of media, now or hereafter known. The author retains all proprietary rights, such as patent rights. The author also retains the right to use in future works (such as articles or books) all or part of this thesis or dissertation.